To cut the toilet bolts, you’ll need to use a hacksaw, a bolt cutter, or a reciprocating saw. With a hacksaw, use a steady hand and tighten the blade in the frame so that it won’t vibrate while you are cutting.
Start by cutting just one side of the bolt so that you are only cutting through one of the top layer of metal. This will make it easier to break the bolt off once you have finished cutting all the way around the circumference.
With a bolt cutter, position the jaws around the bolt and grip and squeeze the handles together. Keep squeezing until you hear the bolt shear through the metal. Finally, for a reciprocating saw, set the blade for a slower speed to reduce the risk of splintering the surface around the bolt, and follow the same steps as for the hacksaw to cut through the metal.
Be sure to wear safety glasses throughout the process.
How do you cut brass bolts?
Cutting brass bolts requires the use of a saw, such as a hacksaw, or a tool specifically made for cutting bolts. When using a hacksaw make sure to use a blade specifically made for cutting metal, such as a high-speed steel blade.
When using the saw, apply strain to the blade in a back-and-forth motion and use some kind of cutting oil or lubricant to reduce friction and protect the blade’s teeth. If you’re cutting a bolt shorter, use the hacksaw to cut both sides at an angle that is opposed from each other.
This produces a shearing action. When using a bolt-cutting tool, adjust the size of the mouth opening to accommodate for the size of the bolt. Once you have a suitable size, place the bolt in the tool and squeeze the handles together until the bolt is cut.
Make sure to use slow, steady pressure and make more than one pass if necessary. Always wear eye protection and safety gloves when using power tools.
What size wrench are toilet bolts?
The size of the wrench needed for the toilet bolts will depend on the particular type of toilet you have, as different models may require different sizes of bolts. Generally, the nuts and bolts used to secure the toilet to the floor are ½ inch diameter nut, which can be removed with a standard ½ inch socket wrench.
If the nuts or bolts seem to be unusual, it may be a good idea to take a quick measurement just to be sure. Additionally, if you are having difficulty loosening the bolts, step up to a larger size socket wrench, such as a ¾ inch size.
What size hole saw do I need for a toilet flange?
The size of the hole saw you need for your toilet flange will depend on the size and style of the toilet flange that you are installing. Generally, the standard size for a toilet flange will require a 2-1/2 inch hole saw; however, it is important to check the specific part that you are installing to make sure that you are selecting the correct size.
If your toilet flange is a different size or style, you may need to purchase a 3, 3-1/2, or 4 inch hole saw. Additionally, you may need to use a drill bit to make some additional adjustments prior to using the hole saw.
Therefore, it is important to check your specific part and instructions before determining the size and type of hole saw you will need.
Should toilet flange be flush with flooring?
Yes, the toilet flange should be flush with the flooring. The flange is the a circular fitting at the bottom of the toilet that connects it to the waste pipe. The flange needs to be level with the floor to ensure proper seals and to prevent any water from leaking.
When installing a toilet, you can use shims to level it and ensure the flange isflush with the floor. If the flange is not properly installed or is not on the same plane with the floor, it can cause problems with draining, leaking, and lead to all sorts of issues.
Additionally, if you are using tile flooring, you will also need to make sure that the flange is set in thinset mortar, as tile does not provide a flat, secured surface. Taking the time to ensure that the toilet flange is flush with the flooring will help you avoid even more costly repairs or replacement down the line.
Should toilet flange sit on top of tile?
No, the toilet flange should not be installed on top of the tile. The toilet flange should be recessed into the tile to ensure that it is supported properly. This will ensure that the flange is completely flush with the tile, which will allow the toilet to be securely installed.
Installing the flange on top of the tile can cause the flange to become loose, which can make the toilet unstable or take in water from the outside. If the tile is too thick to recess the flange, then a spacer or extender should be used.
Be sure to follow manufacturer instructions for installation.
Does toilet flange have to be perfectly level?
Yes, in most cases, the toilet flange should be level when installing a toilet. This is so that the toilet can properly sit on the flange and seal against the wax ring. When the flange is not level, the toilet will sit unevenly, causing leaks and other issues.
For example, it could cause the wax ring to break, allowing water to leak onto your bathroom floor. To ensure a proper seal and level installation, it’s important to take steps to make sure the flange is properly installed.
This includes using a level to make sure the flange is sitting evenly and adjust it as necessary. Additionally, when installing a new flange make sure to use mounting bolts that fit securely into the drain.
What can I use for toilet shims?
You can use a variety of different items for toilet shims. Common items used for toilet shims include sponges, plastic wedges, coins, and pieces of plywood. It’s best to avoid using metal coins or objects that could corrode and damage the toilet seal.
When using items like plastic wedges and sponges, make sure the material is thick enough to support the weight of the toilet without breaking. You might also consider purchasing specialized toilet shims, which are made from plastic or vinyl and are designed for this specific purpose.
Specialized toilet shims can be found at most home improvement stores and come in a variety of sizes and thicknesses.
How much does a plumber charge to change a flange?
The cost to change a flange depends on a variety of factors such as the type of material used, the complexity of the job, and the location of the job. On average, a plumber will charge anywhere between $75 – $200 for changing out a flange.
The plumber may need to come provide an estimate to determine the exact cost based on the complexity of the job and the material needed. When having a flange changed, it is important to hire a licensed and certified plumber.
This will ensure the job will be done correctly and that the proper materials are used. It is also wise to get several quotes from different plumbers to ensure you are getting the best rate.
What size is the bolt on a toilet?
The size of the bolt on a toilet varies depending on the model and manufacturer. The most common type of toilet has a closet bolt with a 3/8” diameter and 1. 5” thread length. The closet bolt nut is usually 1.
75” in diameter and is made from brass or plastic. Other toilets, particularly those that are wall mounted or have a detachable tank, have different sizes. For example, one piece toilets have closet bolts that have 1/2” in diameter.
Additionally, the thread length may vary depending on the toilet base. In many cases, the closet bolts are self-tapping, meaning they create their own thread when screwed in, so the thread length doesn’t factor in.
It’s important to note that the size of the closet bolt may be specified in the toilet’s manual and that it’s important to purchase the correct size bolt to ensure the toilet is securely fastened.
What kind of bolts hold down a toilet?
The types of bolts that are typically used to hold down a toilet are often referred to as closet bolts or flange bolts. These bolts secure the toilet to the floor by connecting the toilet base to the flange (or the ring) that is connected to the main drain pipe.
Most toilet closets use two closet bolts, although some may require four if additional support is needed.
Closet bolts come in two pieces, which include a headless bolt that is inserted into the base of the toilet and a mounting nut that is secured to the flange. The bolts are often made from stainless steel and are corrosion-resistant.
The headless bolt is inserted at an angle, allowing it to angle to the left and right of the flange for a secure fitment. Once the bolts are in place, the mounting nut is used to tighten them by using an adjustable wrench.
Are toilet tank bolts universal?
No, toilet tank bolts are not universal. Toilet tanks are designed differently, depending on the manufacturer and model, so the bolts will also vary between these different types. Generally, toilet tank bolts have nuts that are designed to fit a specific type or model of toilet.
As such, when purchasing replacement toilet tank bolts, you should check the product specifications and make sure they match the type and model of the toilet that you have. If you can’t find the right size or type of bolts, you could contact the manufacturer of the toilet for more information on the bolts for that particular model.
How do you unscrew a tight toilet screw?
Unscrewing a tight toilet screw can be a tricky job, especially when it’s been in there a while. Fortunately, there are some tips and tricks you can use to make the job easier. First, try using a pair of pliers to get a better grip on the screw.
If that doesn’t work, use a lubricant such as WD-40 or a similar product, to help loosen the screw. If it’s still stuck, try soaking it in penetrating oil overnight and then trying again the next day.
If all else fails, a flathead screwdriver or an impact driver should be able to break the seal and get the job done. Whichever tool you use, be sure to use caution and gradual pressure to prevent stripping the threads or damaging the screw or toilet itself.
Can you overtighten toilet bolts?
Yes, it is possible to overtighten toilet bolts. This can cause damage to the flange in the floor or the toilet itself. When tightenting the bolts, use a wrench instead of a screwdriver and only turn it 1/4 turn at a time.
Overtightening the bolts can strip the nut or cause the bolt to break. It can also cause the toilet to become misaligned, resulting in leaks around the base of the toilet. If you are uncertain or uncomfortable with tightenting the bolts yourself, call a professional plumber to help.
Will tightening toilet bolts Stop Leak?
Tightening the toilet bolts is not a guaranteed fix for a leak in the toilet. This is generally due to the fact that the bolts may not be the cause of the leak. It could be a defective seal between the toilet tank and the toilet bowl, a corroded flange under the toilet, or even a cracked porcelain tank or bowl.
If you have determined that the bolts are the cause of the leak, tightening them may help to stop the leak. However, before you tighten the bolts, make sure that the toilet is properly seated on the flange.
Use a level to ensure that the toilet bowl is level in all directions. If it is not, adjust the feet of the toilet to level it before tightening the bolts. After tightening the bolts, be sure to check for leaks around the base and around the seal between the tank and the bowl to make sure the leak has been stopped.
If the leak persists, you may need to replace the damaged parts or call a professional plumber for repairs.