No, not all bathtubs are standard size. The standard size for a bathtub is a 60-inch-long bathtub with a 32-to-34-inch width. This size fits into most bathrooms and provides adequate space to lie down comfortably and soak.
However, depending on the layout and size of your bathroom, that size may not be ideal for your home. In addition, there are a few popular variations of the standard size bathtub that come in different sizes.
For example, alcove bathtubs come in sizes of 54, 60, 66, and 72 inches long, while claw-foot tubs range from 48-72 inches long.
Whirlpool and air baths come in a variety of sizes, from small corner tubs and three-wall alcove tubs to extra-long 72-inch bathtubs and even non-standard sizes. Lastly, drop-in tubs are available in a wide range of sizes as well, ranging from 36-58 inches in length and 20-48 inches in width.
The best way to determine the right size bathtub for your bathroom is to measure the area you plan to place the tub in and compare it with the difference sizes and versions of bathtubs available. It’s also important to consider the height and width of your tub, as well as the style of tub and the maximum dimensions of the drain and other plumbing fixtures.
How do you measure for a replacement bathtub?
Measuring for a replacement bathtub is an important step in any bathroom renovation project. It is important to take accurate measurements in order to ensure the correct size and fit of the bathtub.
When preparing to measure for a bathtub, start by gathering the materials needed such as a tape measure, a paper and pencil, and a level. Before measuring, remove any shower doors or curtain rods that could obstruct taking accurate measurements.
To begin measuring, measure the length and width of the inside of the existing bathtub. To get an accurate measurement, measure the inside wall at the widest point. Depending on the type of bathtub, the measurements could vary from wall to wall, so it is important to take accurate measurements.
Next, measure the width and depth in multiple spots along the bathtub. The depth should be measured from the sill/ledge of the bathtub to the top of the bathtub rim.
To ensure the bathtub fits securely, make sure to measure for door openings or entry points to the bathroom and note the measurement on the paper. The bathtub must fit through doorways and hallways, so accurate measurements are essential.
Finally, after the measurements have been taken, measure the distance between the floor and the wall around the bathtub to make sure the drainage hole is correctly aligned.
Once all measurements are taken, they can be compared to the measurement guidelines provided by the manufacturer. This will ensure the correct bathtub size is purchased for the job. Taking the time to measure properly will save time and help insure the correct size and fit of the bathtub.
Do bathtubs come in different widths?
Yes, bathtubs come in different widths. The most common bathtub width is 60 inches, but some larger tubs can range from 66 inches up to 72 inches. Shorter tubs, such as corner tubs or alcove tubs come in widths that range between 30 to 54 inches.
Many modern style bathtubs are wider than traditional tubs and are often wider than the chosen vanity size. To optimize a bathroom layout it’s best to select a tub with a smaller width and make it deeper.
This will allow for more elbow room in the bathroom and could also allow for a single sink vanity with some counter space. Additionally, there are different shapes of bathtubs as well as alcove, corner, freestanding, whirlpool, and drop-in tubs with widths that may vary depending on the design.
Can you replace just a bathtub?
Yes, you can replace just a bathtub without having to replace the entire bathroom. Depending on the materials of the existing tub and the new tub, you may have to make adjustments to make sure the new tub fits properly in the current space.
In some cases, the plumbing and wall structure may also need to be adjusted. There are also some other items that may need to be adjusted such as the showerhead, tile, fixtures and grout. Other than that, you should consult a professional to help with the replacement of the tub and installation of any new materials.
If done correctly, you should be able to have a new bathtub without having to completely replace your entire bathroom.
What is the average price to replace a bathtub?
The average price to replace a bathtub typically depends on the type of tub you choose, your geographic location, and the complexity of the installation. If you choose to replace your old bathtub with a basic model, the average cost can range from $300 – $800.
Luxury baths, on the other hand, can cost as much as $2,500. Installation cost is also an important consideration. Depending on necessary plumbing, fixtures, and tiling, the cost to install a new bath can range from $200 – $1,500.
Therefore, the average cost to replace a bathtub could range from as little as $500 to as high as $4,000.
What does it cost to have a new bathtub installed?
The cost of having a new bathtub installed will depend on a variety of factors, including the type of bathtub being installed, the size and location of the tub, and any additional fixtures or plumbing supplies required.
On average, professional bathtub installation can cost anywhere from $400 to over $2,000, depending on these factors. The actual cost may also vary depending on the level of expertise and experience required for the job; for example, a professional plumber with experience in bathtub installation may charge more than a novice.
As such, it is important to do your research beforehand, including getting several different estimates from experienced professionals in your area that specialize in bathtub installation.
Is it worth replacing a bathtub?
Whether or not it’s worth replacing a bathtub depends on a variety of factors. Depending on the age and condition of the tub, a replacement can make sense both from a practical standpoint and from an aesthetic one.
If the tub is older, scratched, and/or stained, replacing it may be the only option for making it look new again. The same can be said for functionality — a tub with structural damage may need to be replaced, or have its tub filler and/or drain mechanisms replaced if they are leaking or becoming difficult to move.
If you’re looking to upgrade an existing tub, there are a wide range of stylish and functional models available. Replacing your current tub with a modern one can instantly add a fresh, modern look to your bathroom, or one that complements a more traditional style.
Tub models are available with features such as hydrotherapy, air bubbles, and adjustable backrests to provide a spa-like experience; as well as pre-leveled systems that make installation easier. Replacement tubs are also available with space-saving designs, and many are available in various colors, shapes, and sizes, so you can find one that fits your needs and space.
The cost of replacing a bathtub will depend largely on the model chosen and how much effort and labor is required for the job. Generally speaking, a good quality bathtub can range anywhere from a few hundred dollars for a basic model to several thousand for a high-end design.
For this reason, it’s important to consider all the costs associated with the project, such as removal and disposal of the old tub and any additional installation materials, as well as whether or not you will need to hire a plumber or contractor.
Overall, replacing a bathtub may be worth it depending on a variety of factors and the costs involved. By taking into account the condition of the current tub, the desired look, and the associated costs, you can make an informed decision on whether or not it’s worth replacing your tub.
Can bathtubs be cut to size?
Yes, bathtubs can be cut to size. Cutting a bathtub to size requires a few materials, including a pre-cut template, sharp tape measure, electrical saw, and a grinder. First, measure the area of the tub where you need to make the cut.
Second, place the pre-cut template where you need the cut and mark it before tracing the overall shape of the template onto the tub with a marker. Third, use an electric saw to cut out the shape you marked.
Finally, use a grinder to sand and clean up the edge of the tub for a smooth, finished look. Using this method, it is possible to custom-cut a bathtub to fit your exact specifications.
What sizes do bathtubs come in?
Bathtubs come in a wide variety of sizes depending on the space available in the bathroom, the design of the bathroom and the amount of people that are planning to use it. Generally, there are 3 standard sizes – small, medium and large.
Small bathtubs measure around 60 inches in length and 30 inches in width. They are ideal for tight spaces, such as half-bathrooms or small bathrooms.
Medium sized bathtubs measure between 60-72 inches in length and 30-36 inches in width. They are great for bathrooms that have more space, such as master bathrooms, and allow for two people to bathe comfortably.
Large bathtubs measure around 72 inches in length and 36 inches in width and are suitable for larger bathrooms. These bathtubs are ideal for couples and can comfortably fit more than one person in them.
In addition to the traditional sizes, bathtubs also come in custom sizes that are determined by the user’s specific needs. Custom bathtubs can be made in any length and width, as well as with specific features, such as built-in seats, shelving and lighting.
Can you put a new bathtub over an old one?
Yes, it is possible to put a new bathtub over an old one, although there is more involved than simply laying it in place. In this process, known as “deck mount” installation, the new bathtub is mounted on an existing platform, such as an old tub or the flooring.
In order to do this, you will need to first remove the old fixtures, such as the spout, shower head, or existing bathtub, and replace the platform with a 2×4 base for the new tub. Additionally, you will need to ensure the area is level, waterproof the wall area behind the deck-mounted tub, and will require cutting for any piping or fixtures that need to go through the sides or bottom of the bathtub.
While this is a somewhat involved process, deck mounting can be done with competent DIY skills or by calling a professional plumber.
How often should tubs be replaced?
Tubs should be replaced when they are no longer able to be cleaned, when they become cracked, or if they are simply outdated and in need of an upgrade. If a tub is made of plastic, it’s recommended to replace it every five to ten years, but if it’s made of cast iron or steel it can last much longer.
If a tub is not showing signs of wear and tear, then it may not be necessary to replace it, as long as it continues to look and function properly. Additionally, some tubs are treated with a special coating that helps to prevent staining and damage, which can lengthen the life of the tub.
How much does it cost to remove and replace tub?
The cost of removing and replacing a tub can vary greatly depending on the type of tub, the extent of the work required, and where the tub is located. For example, removing and replacing an acrylic tub in a standard sized bathroom would typically cost between $1,500 and $3,000 in total.
This assumes the tub is removed and all necessary plumbing and electric work is completed, as well as replacing any bath fixtures, shower fixtures and any other accompanying items. The cost would be higher if there was a need for more refined, custom restoration, or if the tub was in a more complicated location.
In addition to the cost of materials, there may also be additional fees for labor, permits and other things, so the total cost can vary.
Can you replace a bathtub without replacing tile?
Yes, it is possible to replace a bathtub without replacing the tile. If you have a tiled wall surrounding the bathtub, you can usually remove the tub and replace it with a new one without removing the tile.
You need to be careful, however, to make sure the new tub fits the same dimensions and size of the existing space. If the tile was installed with a curved edge, be sure to check the new tub before you commit to making any changes.
You should also check to make sure the framing and floor construction will still support the weight of the new bathtub and any additional water that may be present. To keep from causing any major structural damage, a professional may be hired to help you assess the existing structure to be sure it is still safe for use.
You will also need caulking, epoxy grout, a sealant and thinset mortar when replacing a bathtub, so be sure to factor the additional costs for these materials and the tools you may need, into your budget.
Having the right tools and materials is essential, so you can make sure to have an effective water barrier and have a successful install.
Is it cheaper to resurface or replace a bathtub?
It depends on the condition of the bathtub and the type of bathtub that you have. Generally speaking, it is usually cheaper to resurface a bathtub rather than replace it. Resurfacing can usually be done for less than $200, whereas replacing a bathtub could cost up to a few thousand dollars, depending on the size, material, and type of bathtub.
Resurfacing is a good option if the bathtub is in good shape and it will extend the life of the tub for several more years. However, if the bathtub is beyond repair, then it may be necessary to replace it.
To determine whether to resurface or replace the bathtub, it is best to consult a professional and ask them to inspect the condition of the bathtub.
What are the different sizes of bathtubs?
Bathtubs come in a variety of sizes that depend on the layout of your bathroom and on your own personal preferences. The common sizes include:
• Standard Size: These are bathtubs that measure 5 feet long and 2 ½ feet wide. They are the most typical bathtub size and they fit comfortably in most bathrooms.
• Compact Size: These bathtubs are usually 4 feet long and 2 feet wide, so they are much smaller than the standard size. These types of tubs work well in small bathrooms or where space is limited.
• Corner Tub: Usually, these types of tubs are installed in the corner of a bathroom. They can be up to five feet long and they can be round or square shape.
• Whirlpool or Spa Tub: This is a larger type of bathtub that has built-in jets for a therapeutic massage. Some of them are big enough to fit two people.
• Garden Tub: A garden tub is a large bathtub, often with an elevated back, which makes it more comfortable for soaking.
• Walk-In Tub: This type of bathtub is ideal for the elderly or those with physical limitations. It has an open door that allows you to safely get in and out of the tub.
No matter what size you choose for your bathroom, it is important to make sure that it fits with your space and meets your needs.