Integrated under-counter fridges are not necessarily a standard size. The size of these fridges vary depending on the manufacturer, where it has been purchased from and the model. Generally, integrated under-counter fridges will measure between 45cm and 90cm in width, and between 54cm and 60cm in height.
However, there are larger and smaller models available depending on the space available and the requirements of the consumer. Additionally, it is possible to find bespoke or custom-sized integrated models that can fit any cabinet space or opening.
When selecting an integrated fridge, it is important to measure the exact size of the available space, as this will determine the size of fridge that is suitable.
How do you measure an integrated undercounter fridge?
Measuring an integrated undercounter fridge is a relatively straight forward task. Before beginning to measure, you need to consider if it needs to fit a specific countertop or cabinet opening space.
You should then measure the height, width, and depth of the existing opening, taking note of any obstructions, such as countertop and cabinet moldings or decorative trim.
To measure the refrigerator itself, start by measuring the outside dimensions of the refrigeration unit, including the door or drawer. Measure the height, width, and depth in inches or centimeters, depending on what dimension the manufacturer advertises in.
This will provide the maximum size you can purchase.
Next, you need to measure the interior capacity of the integrated refrigerator. Measure the height, width, and depth of the fridge cavity and note any obstructions, such as shelves, door racks, and drawers.
If there are features within the cavity that can be adjusted or removed, this should also be noted.
Finally, you should look up the refrigerator’s energy rating, which is listed by the manufacturer in the form of an Energy Star rating. This rating determines how efficient the refrigerator is and is based on the amount of energy it takes to keep food cool in the appliance.
By following these steps and considering the measurements that are available for the integrated undercounter fridge and the existing space, it will be easy to accurately measure an integrated undercounter fridge.
Is it hard to fit an integrated fridge?
An integrated fridge (also known as a “built-in fridge”) can be a great look for any kitchen, but it can be a bit more challenging to fit than a standard freestanding fridge. The size of the kitchen and appliances will ultimately determine the difficulty of the fit.
To properly accommodate an integrated fridge, the space must be exact in size and shape so that it fits properly into the surrounding cabinetry. Additionally, there may be more wiring and plumbing work needed depending on the specific model and location in the kitchen.
It is also important to keep in mind clearance requirements for the integrated fridge to open and close properly. All in all, for a successful integrated fridge install, careful measurements, a good plan, and professional installation are usually recommended.
Can you replace an integrated fridge?
Yes, you can replace an integrated fridge with relative ease. Depending on the size, some fridges will require special installation and engineering, but many integrated fridges can easily be fit into an existing or newly built kitchen.
As you begin to look for a replacement fridge, you’ll want to consider size, features, price and energy efficiency. Make sure the new fridge will actually fit into the space and all the necessary connections can be made.
If you’re finding it difficult to navigate the process on your own, there are plenty of professionals available to help you determine the best choice and complete the installation.
What sizes do integrated fridges come in?
Integrated fridges come in a variety of shapes and sizes to meet the needs of your home or business. The most common sizes are those that fit a standard kitchen cabinet, ranging from 50 cm to 70 cm in height (19.
7″-27. 5″). The width of the cabinet can range from 50 cm (19. 7″) to 60 cm (23. 6″) and the depth can range from 50 cm (19. 7″) to 55 cm (21. 5″). Some integrated fridges may come with a larger capacity and can be up to 150 cm in height (59″) and can range from 60 cm (23.
5″) to 90 cm (35. 5″) in width and 50 cm (19. 7″) to 55 cm (21. 5″) in depth. They are typically more expensive due to their larger capacity and more advanced features, such as Wi-Fi enabled touchscreens and adjustable temperature settings.
Is it easy to replace integrated appliances?
No, it is not easy to replace integrated appliances. Replacing appliances can be a complex and detailed process that requires careful consideration and evaluation of various factors. First, you must determine if the appliance is compatible with your existing layout, whether it fits in the existing opening, and if it matches the existing décor or style of your kitchen.
Additionally, you must ensure that the proper wiring, water connection, and gas piping is available to allow the appliance to function correctly and safely. If there are any changes required, such as reconfiguring the wiring or modifying the cabinets, this should also be taken into consideration.
Finally, you must take care to ensure that the removal and installation of the appliance is handled properly and safely to avoid any potential damage to your home.
What is the difference between integrated and built under fridges?
The main difference between integrated and built-under fridges is the way they are installed. Integrated fridges are designed to be built directly into the kitchen cabinetry, usually at eye level, so they blend into the existing kitchen design seamlessly.
Built-under fridges are placed underneath the kitchen counter and are slightly lower than an integrated models, although some may feature adjustable cabinets that raise the fridge up to an integrated level.
Integrated models come in a wide range of sizes so you can get it to fit any kitchen cabinet layout, whereas built-under fridges tend to be more limited in their dimensions. Additionally, integrated fridges provide more space and can store more food, whereas built-under fridges typically have less internal volume due to their lower height and width.
Finally, built-under fridges are typically more affordable, so if you’re looking for an economical alternative to integrated units, then this is likely to be the better option. Whereas, if you’re looking for an aesthetically pleasing and efficient alternative, then an integrated fridge would be the best choice.
How do I know what size my integrated fridge freezer is?
Measuring the width, depth and height of your fridge freezer is the best way to find out its size. To do this, you’ll need to open up the appliance’s manual and look on the label. This label will usually be found at the back or on the inside of the door, and should have exact measurements listed.
If you’re still having trouble finding your fridge’s size after checking the label, consider calling the manufacturer. In addition to the measurements, they may include more information like volume (in liters) and usable capacity of each section.
It can also be helpful to measure your kitchen space to ensure the appliance will fit. Before you make your purchase, draw a sketch or use a measuring tape to get accurate measurements for cabinets, shelving and counter space.
Also, make sure to check the amount of clearance needed around the unit (at least 1” for ventilation). Additionally, be sure to factor in any existing appliances or furniture near the area you wish to place the appliance, as well as any potential obstructions like doorways, hallways, corners and stairways.
With a little patience, you can easily find the perfect size integrated fridge freezer for your kitchen.
What is an undercounter fridge?
An undercounter fridge is a type of refrigerator that is designed to fit underneath a standard kitchen counter. This type of refrigerator is typically used in kitchens that are limited in both size and space because they can save valuable kitchen counter space.
They are commonly used in apartments, small homes, and camping trailers. Undercounter fridges come in a variety of sizes, so they can be a great choice for kitchens of all sizes. Undercounter fridges are typically slim and tall and the most popular style has two doors: one for the fridge and one for the freezer compartment.
Many models come with adjustable shelves and easy-to-access storage drawers, making food storage and organization super convenient. The temperature green of this type of refrigerator is also adjustable, so you can set it to suit your needs.
How long do integrated fridges last?
Integrated fridges provide a seamless, aesthetically pleasing look for your kitchen when installed for the first time. The lifespan of the fridge depends on several factors, including the quality of the components, level of maintenance, and how often it’s used.
Generally, you can expect an integrated fridge to last between 10 and 25 years if it is properly cared for. Improper care or maintenance can cause the life expectancy to be much shorter. It’s important to keep the seals in good condition and clean the interior of the fridge regularly.
Otherwise, moisture and debris will wear the components down and cause premature aging. Additionally, if the appliance is used infrequently or if a component is defective, it will not last as long. To get the most out of your integrated fridge, it is important to keep it clean, check components regularly, and repair damaged or worn parts promptly.
With regular maintenance and care, you can expect an integrated fridge to last up to 25 years.
What refrigerator has the least problems?
When choosing a refrigerator, it’s important to consider a model that has the least amount of problems. Reviews and rankings can be helpful in making an informed decision. Generally, the most reliable refrigerators are those from well-known, reputable brands that are known for their quality, such as Samsung, Whirlpool, LG, and GE.
In addition to brand, consider features that meet the needs of your household and the size of the fridge.
When shopping for a refrigerator, look for features such as reliable cooling, easy-to-use temperature controls, humidity controls, spill-proof shelves, door seals, and a sturdy construction. Many modern features such as ice makers and digital temperature control panels are also becoming more commonplace.
Check for Energy Star ratings for more energy efficient models if a cost savings is desired.
In terms of reliability, refrigerators with bottom-mount freezers typically experience fewer problems than top-freezer models. In addition, French-door refrigerators (with side-by-side freezer doors) also have a good track record of reliability.
Additionally, focus on researching how well each refrigerators holds its cool temperature and how effectively it operates. Doing research and checking reviews can help narrow the selection to a model that is reliable and suitable for your needs.
Which type of fridge is most reliable?
When it comes to selecting the most reliable type of fridge, choosing one with a good energy efficiency rating is always a good choice. Many of the most reliable fridges are side-by-side, top-mount, French-door, or bottom-mount style fridges.
These are also typically more energy efficient than traditional top-mounted freezers, as the freezers can be opened at the same time to access a variety of items.
When selecting a specific model, take a look at the reviews and customer feedback. Some of the more reliable fridge brands that are consistently recommended by refrigerator experts include Whirlpool, KitchenAid, Frigidaire, and LG.
Additionally, look at the features that come with the fridge, such as adjustable shelves and temperature settings.
Overall, when it comes to selecting the most reliable type of fridge, consider the energy efficiency rating, reviews, customer feedback, and features of the model. A combination of these factors should help you determine which type of fridge is the most reliable for your needs.
Can you use a normal fridge for an integrated?
No, you cannot use a normal fridge for an integrated fridge. Integrated fridges are built into the cabinetry of a kitchen and have no visible sides, back, or front, which means the construction needs to be designed, built and installed differently than a standard refrigerator.
It is also important to consider the different dimensions and height of an integrated fridge. Installation also requires specialized expertise and careful planning. In addition to being custom-built for installation in cabinetry, integrated fridges also typically come with more features such as adjustable shelving and variable temperature zones, which a standard refrigerator does not.
What does it mean when a fridge is integrated?
When a fridge is integrated, it means that it has been designed to fit seamlessly into a kitchen cabinet. It is designed to fit in with the other kitchen appliances and cabinetry, making the design of a kitchen look harmonious and aesthetically pleasing.
This type of refrigerator typically doesn’t have any doors that would stand out, as it is designed to have a smooth and flat outside surface which blends in with the cabinet and countertops. Although an integrated refrigerator is usually more expensive, it can provide a modern and aesthetically pleasing look to a kitchen.
Do you need to leave space between fridge and wall?
Yes, it is recommended that you leave some space between the refrigerator and the wall. This will help to ensure proper air circulation and cooling of the appliance. It is typically recommended that there be at least an inch of space on either side of the refrigerator for optimum performance.
Furthermore, leaving at least six inches of space at the back of the unit will prevent the compressor from becoming too hot and potentially shortening its lifespan. Keeping the refrigerator away from heat-producing appliances, such as heaters and stoves, will also help.