Yes, there are other companies like Bath Fitter. Two of the most well-known companies in the bath remodeling or replacement industry are Re-Bath and The Home Depot. Re-Bath specializes in complete bathroom renovations, where they remove existing components and install new pre-formed units (shower, tub, wall enclosure).
The Home Depot offers customizable solutions and over 75,000 products from flooring to tubs and showers, so you can find the perfect fit for your bathroom. Other companies include Onyx Collection, Kohler, Lowe’s, and American Standard as well.
Each company offers different services, styles, and prices, so it’s important to do your research and find the best option for your budget and needs.
What is the average cost of a Bath Fitter conversion?
The average cost of a Bath Fitter conversion depends on the size and scope of the project. A basic bathtub-to-shower conversion usually starts at around $2,000. This usually includes a shower surround and shower door, but additional fixtures and accessories such as ceramic wall tile and shower valves will increase the cost of the project.
More involved remodels, such as a full bathroom conversion with a complete vanity and suite of accessories, will run closer to $10,000. Since each project is unique and costs can be impacted by your home’s existing plumbing and electrical setup, it is best to contact a Bath Fitter representative for a free in-home consultation to get an accurate cost estimate.
How long do Bath Fitter tubs last?
Bath Fitter tubs are made of durable materials that are designed to last for many years, as long as they are properly taken care of. The acrylic material resists cracking, fading, and chipping and is also resistant to mold and mildew build-up.
The material also retains its heat better than standard tubs, allowing for warm baths even after the water has been drained. With the correct care and maintenance, your Bath Fitter tub can last your family many years, with some customers reporting they have had their tub for over 10 years.
To ensure your tub’s longevity, it is important to routinely clean it, take special care when cleaning it with abrasive products, and carefully inspect for any damage. In the rare cases that repairs are necessary, Bath Fitter also offers additional warranties and guarantees for their products.
Do bath fitters last?
Yes, bath fitters can last a long time. Usually, the finish and seal of the bath fitter can last up to 10 years or more depending on how well it is maintained. The material used to make bath fitters, such as acrylic, is strong and durable, meaning bath fitters can withstand daily use in wet environments for a long period of time.
Additionally, bath fitters are designed to provide a chemical and stain-resistant finish, making them suitable for long-term use. However, it is still important to maintain a bath fitter properly to ensure it lasts for many years.
Regularly cleaning the bath fitter with a mild detergent and soft cloth, checking the seals and trim around the edges, and replacing any worn out parts when necessary can greatly extend the lifespan of your bath fitter.
Can you install Bath Fitter yourself?
No, you cannot install Bath Fitter yourself, as professional installation is required for a proper fit and guarantee for the product. Bath Fitter is a specialized product that requires experienced technicians to properly fit and install the enclosure, and includes services such as cutting and fitting, caulking, and checking for leaks.
Depending on the product chosen and the size of the installation, a professional Bath Fitter installation may take up to two days and involves precise measurements, careful cutting and precise installation in order to ensure a perfect fit.
As such, it is highly recommended to have Bath Fitter professionally installed to get the best results.
Does mold grow under Bath Fitter?
Mold growth under Bath Fitter is a possibility since it is a product of the bathroom, which is a moist and humid environment. At the same time, Bath Fitter provides a solid seal when installed correctly, and is made of material such as acrylic, which is resistant to moisture.
However, this resistance to moisture can be decreased over time due to incorrect installation, water leakage, or poor ventilation. As a result, this could promote mold growth. The best way to prevent mold growth under Bath Fitter is to make sure that it is installed properly and that the area is well-ventilated—this will help keep moisture levels low.
Furthermore, it would be beneficial to inspect the area regularly to ensure that Mold is not growing under Bath Fitter.
What is the difference between Bath Fitter and Rebath?
Bath Fitter and Re-Bath are both companies specializing in bathroom remodels, but they take different approaches. Bath Fitter specializes in one-day spa-like bathroom remodels, whereas Re-Bath specializes in traditional, full-scale remodels that are done over the course of several days.
Bath Fitter updates bathrooms with shower and tub surrounds, along with other modifications that can be done in as little as one day so that customers can start enjoying their “new” spa-like bathroom right away.
Re-Bath, on the other hand, usually takes several days for the entire remodel process due to the more extensive work that is generally involved. Additionally, Re-Bath has a broader selection of products and services, like countertops and tile flooring, to give customers the chance to make more drastic customizations to their bathrooms.
Overall, the decision of which company to use will depend on a customer’s individual preferences and the scope of the remodel they are hoping to achieve. Both companies offer quality services, but one might be more suitable for a certain project than another.
How long does it take to install a Bath Fitter?
The installation time for a Bath Fitter depends on several factors such as the size and style of the product, the complexity of the installation, the job site, and the weather conditions. On average, most products can be installed in one to two days and are completed within the opening and closing hours of the retail store.
If the product is a bathtub, the installers may need to provide a quote for additional time for demolition and tiling tasks. For shower and tub installations, a professional installation team will ensure quality installation, proper sealing, and reinforced bracing.
The installation process also includes any special requests such as shower door installation, grab bar installation, and other accessibility items. Before the installation, customers should also remove any items that may interfere with the installers’ work and expect the installers to use caulk, glazing sealants, and warranted materials.
Upon completion, a final product presentation is provided and the finished product is reviewed and inspected.
Is it hard to install your own bathtub?
Installing your own bathtub can be a difficult and time-consuming task. There are a lot of steps and considerations to take when installing a bathtub, including obtaining tools, materials, and the necessary measurements.
Additionally, you will need to prepare the space, connect any necessary pipes and lines, install the bathtub, connect the drain and overflow, and then finish the project by sealing joints and testing its functionality.
While it is possible to install a bathtub on your own, it is not recommended. Installing a bathtub should be left to a professional, as it requires knowledge and expertise to do properly. Improper installment can lead to leaks and other costly issues.
Therefore, it is best to hire a bathtub contractor to install the tub and any other items such as faucets and accessories in order to ensure a successful and safe installation.
Can you resurface a bath yourself?
Yes, you can resurface a bath yourself depending on the type of damage and the material of the bath. For example, if you have a GI bathtub and there are minor scratches, then you can use a bath spray paint to cover it up.
If the scratch is too deep, you should use a two-part acrylic repair kit. On the other hand, if the bath is made of cast iron, you should use polyester acrylic enamel paint, as it will ensure a high-gloss finish.
Additionally, enameling kits are suitable for porcelain bathtubs.
Regardless of the bath material, the most important thing is to prepare the surface before repainting. You will have to sand the area to get rid of any rust or corroded surface and then clean it thoroughly with a mild detergent.
After this step, you have to apply the primer to ensure a better adhesion. Next, you should apply the selected paint according to the instructions outlined in the instruction booklet. Once the paint is dry, you should apply the clear topcoat for an extra layer of protection.
It is important to note that resurfacing a bath can be tricky, and it is not recommended for those who lack experience. If you are uncertain of how to approach the task, it is better to hire a professional to get the job done.
Are free standing baths easy to install?
In general, free standing baths are fairly easy to install and often come with a straightforward set of instructions from the manufacturer. The most important part is to mark and level the area for the bath before installation, as it needs to be accurately measured to ensure a safe, secure installation.
There are various types of freestanding baths, so it’s best to read the instructions of the specific bath you’ve purchased carefully. Generally speaking, you will want to ensure the floor has sufficient load-bearing properties to safely hold the weight, your plumbing lines are the correct length to safely reach the bath, and the floor and walls should be level to make sure the bath is properly aligned.
Depending on the type of bath you have purchased, you may also need to complete some tiling or waterproofing before you can start installing the free standing bath.
Do you put flooring under free standing tub?
Yes, it is recommended to install a subfloor underneath a free standing tub. This should include plywood or other flat and solid underlayment material that is laid on top of the subfloor to create a level and consistent surface for the tub.
Installing a subfloor will provide additional support for the tub and ensure that it does not move or rock on top of the floor. Additionally, it will help keep the interior of the tub warmer and reduce the chance of water damage to the floor underneath.
It is important not to skimp on the subfloor and make sure it is properly installed according to the manufacturer’s instructions.
What is the easiest tub to install?
The easiest tub to install is an acrylic drop-in tub. This type of tub comes pre-assembled and is usually supported from below by a metal or acrylic frame. The frame is designed to slide into an alcove or corner for quickly and easily placing the tub into the space.
Additionally, these tubs have finished sides, so the plumbing and associated components can be completely concealed. Drop-in tubs are ideal for bathrooms with limited space or if you don’t have the budget to invest in a more expensive custom tub.
Installing a drop-in tub is relatively straightforward and can usually be done in a day due to simple instructions and most components being pre-measured and cut. Additionally, a plumber is only necessary to attach the drain and supply lines.
How much does it cost to install a freestanding bathtub?
Installing a freestanding bathtub can be expensive, depending on the size and type of bathtub you choose. The cost typically ranges from $400 to $5,000, including the price of the bathtub and installation.
Factors that vary the cost include the brand, material, size, installation complexity and delivery. Higher-end freestanding bathtubs may have unusual shapes, jets, or other features that require more complicated installation.
The complexity of the installation process is usually one of the most important factors in a bathtub installation price. On average, it would cost about $2,000–$3,000 for a freestanding bathtub installation, but could be higher or lower depending on the bathtub, design, size, and installation requirements.
The type of material is also an important factor when considering the cost of a freestanding bathtub installation. Acrylic tubs are typically more affordable than porcelain or stone varieties. Additionally, the cost may include accessories such as faucets, drainage systems, and other components.
Furthermore, there may also be labour costs related to rearranging plumbing or making adjustments to make the bathtub fit in your bathroom. As such, it’s important to understand the full cost when installing a freestanding bathtub.
How much does it cost to remove an old bathtub and install a new one?
The cost of removing an old bathtub and installing a new one can vary greatly depending on the materials and style of tub you choose. It is important to get estimates from at least three contractors to see which one offers the best value and make sure they use quality materials.
On average, you can expect to pay anywhere between $1,000 and $3,000 for the entire job, depending on the installation process, materials, and size of the bathtub. The actual cost will also depend on the condition of the space and any problems with the existing plumbing.
Additionally, any extra work needed may increase the cost. An old bathtub may need to be cut into pieces, and any septic or other plumbing needs to be accounted for. If the job includes large changes such as a tile lining or new fixtures, you can expect to pay much more.