Skip to Content

Are wall hung toilets harder to maintain?

Wall-hung toilets might require a bit more work when it comes to maintenance, mainly because of their unique characteristics. Installing them can be more complicated due to the additional components needed, such as a frame and mounting hardware.

Once installed, the toilet is slightly elevated off the ground, making it slightly more difficult to reach and clean the underside of the toilet and around the wall where the frame is mounted. Additionally, the wall-mounted frame will require periodic cleaning due to the accumulation of dust, dirt, and grime that can occur over time.

On the other hand, there are also advantages that come with wall-hung toilets. For one, they are easier to clean since debris can be brushed away without having to move or crouch down for access. When it comes to flushing, wall-hung toilets typically require less water as well.

Overall, wall-hung toilets may require a bit more work at the beginning due to the installation and periodic cleaning of the frame. However, in terms of general maintenance, wall-hung toilets can be just as easy or even easier to maintain than regular toilets.

What are the disadvantages of wall-mounted toilet?

The primary disadvantage to wall-mounted toilets is the installation process. They require a specialized install process, which is time-consuming and involves long-term plumbing work. Additionally, since there is a limited space between the wall and the toilet, access to the plumbing is more difficult.

Wall-mounted toilets can also be expensive and require specialized plumbing tools for repairs and installation. Because of the specialized tools needed, the installation process can be rather costly, especially if you hire a professional plumber to install the toilet.

Furthermore, wall-mounted toilets rely heavily on the wall for support, which means that if the wall is not properly reinforced, the toilet can suffer from instability and may even come crashing down if the wall is not thick enough to support the weight of the toilet.

Finally, wall-mounted toilets typically cannot accommodate larger-sized toilets, so if you are looking for a larger toilet to accommodate a disabled or elderly individual, a wall-mounted toilet may not be the best option.

Are wall-mounted toilets more expensive to install?

Wall-mounted toilets can often be more expensive to install than standard floor-mounted toilets since wall-mounted toilets require a more complex installation process. In most cases, the plumbing must be adjusted to accommodate both the wall-mount and the specialized toilet.

This may include replacing near-wall piping and fixtures as well as creating space to install the new wall-mounted units. Additionally, several specialized tools and materials may be needed to complete the installation.

The actual cost of the installation will depend on the complexity of the plumbing system, the condition of the existing plumbing, type of materials used, and the labor costs of the contractor. Wall-mounted toilet systems may also require the installation of specialized wall-mounted sinks or bidets, which can also add to the cost of the installation.

As with many remodeling projects, it is important to research costs and compare prices between different contractors to get the best overall value.

Is there a weight limit on wall hung toilets?

Yes, there is a weight limit on wall hung toilets. Most wall hung toilets can support up to 400 pounds, but some can handle up to 800 pounds. However, the heavier the load, the more stress it puts on the plumbing, so it is important to check with the manufacturer or retailer to determine the weight capacity when shopping for one.

Furthermore, it is important to install the toilet on a rigid floor to prevent sagging and creaking. Additionally, wall hung toilets generally require a minimum drainage height of 19 inches, so it is important to check if your existing drain meets that requirement.

Why are Japanese toilets so good?

Japanese toilets are renowned for their outstanding quality and design. Toilet technology has advanced significantly in Japan in recent years, offering an array of features designed to ensure a comfortable and hygienic restroom experience.

In particular, many Japanese toilets are equipped with features such as heated seats, warm water washes, scent generators, deodorizers, and automatic flushing.

Also, Japanese toilets are designed with both aesthetics and function in mind. Many models are modern and sleek in appearance, with square lines and stylish designs. A variety of colors and finishes can be found to match the decor of any restroom.

Additional features such as music and customizable settings allow users to create a truly unique restroom experience.

These state-of-the-art toilets are also incredibly efficient and energy-saving. Many models come with dual-flush systems and sensor-activated flushing to reduce water and energy consumption. Automatic lid openers and night lights are also usually included, adding to the convenience.

All these features make Japanese toilets some of the best toilets in the world. They are designed to provide the perfect combination of comfort, convenience and sustainability.

Why do jails use metal toilets?

Jails use metal toilets mostly because they are strong and durable, so they can stand up to high levels of use on a daily basis. Metal toilets also tend to be much more difficult to vandalize and break, compared to plastic or ceramic toilets.

This prevents maintenance personnel from having to spend time and resources on repairs and replacements. Additionally, metal toilets can also be bolted to the floor, which helps to reduce the chance of them being removed, as well as accidents occurring due to inmates slipping or toppling over them.

This level of security is especially important when dealing with highly volatile inmates. Furthermore, metal toilets tend to be much easier to clean and keep sanitary, which is paramount in a jail environment.

How do wall hung toilets flush?

Wall hung toilets operate a bit differently than regular toilets since they are mounted directly to the wall and the tank is not visible. Instead of a regular tank, the flushing mechanism is built into the wall with a small box that houses the flush valve.

When you press the flush button on the wall plate, it will trigger the flush valve that opens, releasing water from the supply line and flushing the toilet. After the valve has opened, gravity will close it again, limiting the amount of water that is used to flush the toilet.

Wall mounted toilets are quite efficient since the limited supply of water will help to reduce water consumption. Additionally, keeping the tank out of sight allows for a modern and sleek aesthetic.

How much does it cost to install a wall hung toilet?

The cost to install a wall hung toilet can vary greatly depending on the type of toilet you are purchasing, the complexity of the installation, the cost of labour and the additional materials and fixtures needed.

Generally, costs range from $400 to $1,200 for a basic wall hung toilet installation. Factors that could increase the cost include the toilet being installed in a particularly difficult spot, such as halfway up a staircase, the removal and disposal of existing fixtures, and modifications to walls, floors and plumbing.

Additionally, the cost of any extra fixtures or fittings required for the toilet installation may also increase the overall cost. It is best to consult a plumber to get a more accurate estimate for the installation of a wall hung toilet in your home.

Is oval or square toilet better?

When choosing between an oval or square toilet, there is no one “right” answer. Both types of toilets offer certain advantages and disadvantages that should be evaluated using the factors that are most important to you, such as seat size, installation costs, and flush performance.

Oval toilets tend to provide a more comfortable seating area due to their fluid shape, which often offers a larger seat size. This is beneficial if you are tall or prefer a more spacious area. It can also accommodate users of various sizes, due to its elongated shape.

On the downside, they usually take up more room than a square toilet, and can be more difficult to install due to their larger size.

Square toilets have a smaller form factor than oval toilets, so they are better suited to small bathrooms or powder rooms. They also tend to be easier to maintain and clean. However, due to their straight lines, a square toilet does not offer the same comfort or space as an oval option.

Also, their sharp edges may not be as comfortable for some users.

When it comes to flush performance, most toilets – regardless of shape – now feature powerful flushing systems that provide a high level of performance and reliability. However, it is important to check the ratings of the model you select, as some may perform better than others.

In the end, the best type of toilet for you will depend on your individual needs and preferences. Consider the size, installation difficulty, comfort level, and flush performance of each model to choose the one that best suits your needs.

What is a fair price to install a toilet?

Installing a toilet involves several tasks including selecting and buying the toilet itself, cutting a hole in the floor, connecting the new toilet to the drain line and providing the water connection.

Depending on how difficult it is to make the necessary connections, the installation cost of a new toilet can range anywhere from $200 to $450, with an average cost of around $277. To minimize costs, you may want to purchase the toilet yourself from a home improvement store and ask the plumber to simply install it.

This cost may change depending upon the quality of the toilet you select or the type of work needed for installation. If possible, get a written estimate from a few different plumbers to determine who is offering the best deal.

What kind of toilet is easiest to install?

The easiest toilet to install depends on the type of toilet and the level of expertise of the installer. Wall-mounted toilets are often considered the most straightforward to install, as they usually attach to a wall rather than the floor, which eliminates the need to work with any plumbing connections or wax ring seals.

Tankless toilets also have a simplified installation process as they connect to a wall, eliminating the need for a tank. For novice installers, a one-piece toilet that is ready out-of-the-box with few components is typically the easiest type to install.

They come with a toilet bowl and tank pre-assembled, allowing for quick and easy installation. Installers should be sure to check the measurements of their space to ensure the toilet will fit in their bathroom.

Additionally, it is important to have all the necessary tools and supplies before beginning installation which can include a plunger, knife, water supply shut off valves, wax ring, toilet bolts and a hand held drill.

Doing research on how to properly install the toilet, having patience and taking the time to follow instructions carefully are all important for ensuring a successful and safe installation.

What is the standard size for hanging toilet?

As these types of toilets come in a variety of sizes. The size of the hanging toilet is typically dependent on the space available in the bathroom and the type of water connections used. A common size for a hanging toilet is 12 inches, although some models could be as small as 10 or 11 inches.

Many larger models are also available, with a bowl size up to 18 inches across, although these will typically require more connections and larger water pipes. A hanging toilet with a larger bowl size will provide a greater amount of comfort for the user.

How much space is required for wall hung toilet?

In order to properly install a wall hung toilet, at least 12 inches of space must be allowed between the wall and the center of the toilet. This includes 4 to 6 inches of clearance between the finished wall surface and any toilet accessories (such as the tank, bowl, seat, etc.

) as well as 6 to 8 inches of space for the toilet’s waste line. Additionally, when fitting a wall hung toilet, a wall-mounted water supply valve should be installed within 8 inches of the toilet’s mounting bracket.

New wall hung toilets may also require a mounting rail for rigid support, which must be mounted in the wall according to the manufacturer’s instructions. Many manufacturers’ wall hung toilets also include an accompanying tank or box that is meant to be concealed in the wall behind the toilet, which requires extra space for the installation.

This is usually 1″ to 3″ of extra clearance, but some manufacturers require up to 6”, depending on the tank type. It is important to check the individual toilet’s installation requirements before determining the final space requirements.

What is difference between a standard toilet and a elongated toilet?

The key difference between a standard toilet and an elongated toilet is the size and shape of the bowl. A standard toilet is typically rounder in shape and slightly smaller than an elongated toilet. As such, a standard toilet may be best suited for places where space is limited, such as a half bath.

An elongated toilet is larger and slightly oval in shape. It extends a few inches further out than a standard toilet, with its extra length making it more comfortable to sit on. As such, an elongated toilet is often the preferred choice for larger bathrooms or master bathrooms where comfort is more important than space.

It also may prove to be a more aesthetically pleasing choice.

The other main difference between the two is that a standard toilet generally costs less than an elongated toilet. This may make a standard toilet a better choice for someone on a budget. However, many people find that the extra cost of an elongated toilet is worth it for the added comfort and look.

What is the most popular toilet height?

The most popular toilet height is generally accepted as 14” to 15” from floor to toilet seat. This has become known as the “comfort height” and is the most commonly used toilet height for modern bathrooms.

This height is comfortable for the majority of people and doesn’t require them to lift themselves from a lower seat to stand. However, the actual height of the toilet can still vary depending on various factors such as the length of the toilet user’s legs, and this is why many toilets are available in multiple heights to ensure they are suitable to each individual’s needs.

Standard toilets measure between 11” and 14” and can be used by most people, as can senior or “accessible” toilets which range from 16” to 19”.