Yes, a freestanding bath can be up against a wall. It is a great way to save space and add a feature wall behind the bathtub. To install a freestanding bath against a wall, it is important to make sure that the wall is securely mounted and able to support the weight of the bathtub.
To do this, most plumbers recommend using screws and adhesives that are specifically designed for stress-resistant installation of heavy items. Once the wall is secure, the bathtub can then be securely affixed to the wall with appropriate mounting brackets and screws.
It is especially important to make sure that the wall is level and properly sealed before installing a free-standing bathtub. If the wall is uneven, it can affect the water level in the bathtub, leading to potential flooding.
With the wall secure and level, the bathtub can be secured in place and ready for use.
How close should a freestanding tub be to the wall?
The distance between a freestanding tub and the wall typically depends on the size and shape of the tub as well as the size of the bathroom. Generally speaking, a freestanding tub should be located at least 10-12 inches away from the wall but up to 24 inches away.
The further you place the tub away from the wall, the more space it will take up in the room, so make sure to take that into account when deciding on the distance. If a freestanding tub is surrounded by walls on two or three sides, the distance should be around 4-6 inches away.
The distance should also be adjusted depending on the width of the tub, as smaller tubs may only require a 2-4 inch gap from the wall. Ultimately, the best way to decide on the distance is to measure out the space and physically visualize the distance between the wall and tub before installation.
How much space should be between bathtub and wall?
Ideally, the space between a bathtub and the wall should be between one and two inches. If the bathtub and wall are the same material, such as tile covered walls and porcelain bathtub, this gap will be filled with grout.
If not, the space should be slightly larger, between two and four inches, and filled with a flexible caulk. This is important to ensure there are no problems with water seepage or moisture damage. Additionally, some people may prefer larger gaps to make it easier to clean and prevent mold growth.
How much clearance does a free standing tub need?
When installing a free-standing tub it is important to ensure that the tub has adequate clearance. The general rule of thumb is that 6” of space should be left around the entire tub for ease of installation and ensuring safety for the user.
This means that between the walls, behind the tub and from the tub to the nearest obstacle (e. g. a nearby wall, toilet, vanity, etc. ) there should be at least 6”. This 6” should also be placed within a few floor joists as to ensure the tub is properly supported by the underlying structure.
It is worth noting that if the walls and floor obstruct or limit the 6” clearance then additional measures may need to be taken to ensure the tub is safely installed. This could include adding additional support beams and joists to the floor or taking additional measurements to make sure the tub can securely stand before installation.
Where should a freestanding bath be placed?
When deciding where to place a freestanding bath, you need to consider several factors such as the size of the room, what type of decor you want to create, and the plumbing setup. Ideally, a freestanding bath should be placed in the centre of the room so it can be viewed from all angles and its beauty can be fully appreciated.
This placement also allows you to create a luxurious bathroom setting. If you want to avoid the hassle of remodeling your bathroom to accommodate the plumbing, you can place it in a corner and just draw a curtain or a screen around the bath for privacy.
If you’re short on space, you can opt for a corner bath with a shower installed above or beside it – this way you can have both a shower and a bathtub in the same area. No matter what placement you choose, make sure you secure the bath securely to the ground so it doesn’t move or wobble.
Additionally, try to leave a good amount of space between the bath and the walls to make cleaning easier. Finally, keep in mind that a freestanding bath can be a dramatic focal point for your bathroom, so it is important to consider other elements of the room such as tiling, lighting, and furniture to create a visually appealing and comfortable space.
What do you put behind a free standing tub?
When adding a free-standing tub to a bathroom space, it’s important to think about what will go behind the tub to both complete the look and make sure the area is functional. For a sleek, modern look, consider adding tile to the wall behind the tub.
This can be done by simply covering the entire wall with tile or by creating a pattern, such as subway tile or wainscoting. To ensure the most bang for your buck, choose a neutral color that will look good for years to come.
For more of a luxurious look, consider having a partial wall built behind the tub. This can be done with glass, stone, wood, or even metal. This will give you privacy and also bring texture and additional height to the space, making the tub a true focal point.
If you decide to install a partial wall, think about adding in integrated storage. Add a shelf above the height of the tub or go bigger and install cabinets. This will help to create a spa-like feel while also creating useful storage space.
No matter your style or budget, there are plenty of creative, functional options for what to put behind a free-standing tub.
How much space do you need around a bathtub?
When installing a bathtub, it is recommended that there be at least 20-30 inches of space around the perimeter of the tub. This will provide ample room for comfortable and safe access, as well as enough space to properly apply caulk and ensure a snug and watertight fit.
Remodels featuring tight spaces may require the bathtub to be pushed closer to walls and fixtures, but doing so can sacrifice safety and usability. Additionally, it is important for circulation and ventilation to make sure that any cabinetry, lighting, or other features are not placed too far away from the tub or in areas that limit air movement.
Finally, it is important to consider accessibility requirements when installing a bathtub; people with limited dexterity or mobility should have a larger space to navigate and reach the tub comfortably.
Do you need to waterproof under a freestanding bath?
Yes, it is necessary to waterproof the area under a freestanding bath. This is to help prevent water from seeping into the surrounding areas, walls, and floor and causing damage through moisture and mold growth.
Waterproofing also helps to extend the life of your bath by making it more resistant to damage from water damage and/or high levels of humidity.
When waterproofing under your freestanding bath, it’s best to use high quality materials such as a waterproof membrane, and seal the edges of the membrane with sealant. This will help prevent water from entering the area and damaging the surrounding surfaces.
Additionally, it may be a good idea to use a waterproof grout when tiling around the bath. Make sure to choose a tile grade appropriate for the bathroom environment and that is rated for damp areas.
When installing the freestanding bath, it is critical to not let any gaps arise between the bath and the surrounding surfaces. Use non-shrinking grout to fill any gaps and ensure a reliable absolute seal.
Make sure to inspect the seals regularly and replace when necessary.
Overall, waterproofing the area under a freestanding bath isn’t hard, but it is an important step in keeping your bath well-maintained and free of water damage.
Does flooring go under a freestanding tub?
Yes, you should install flooring under a freestanding tub. The most common type of flooring used is usually tile, as it is water-resistant and can be cleaned easily. This is especially important if you have a freestanding tub with no built-in skirt to cover the floor beneath.
Installing tile under the tub can provide a visual break between the edge of the tub and the floor, which looks more finished. When laying the tile, make sure to spread a bed of adhesiveon the concrete and draw guide lines to keep track of the layout.
You should also use backer board to protect the flooring from any moisture that could be generated. Additionally, make sure to place a vapor barrier under the tile to prevent any moisture from coming up into the subfloor.
Finally, seal the edges with grout caulk to provide a waterproof seal. Following these steps will ensure that your flooring is properly installed beneath the freestanding tub.
Do freestanding tubs take up less space?
Freestanding tubs can take up less space than other types of tubs, depending on the size and design. Freestanding tubs give you more flexibility when it comes to where to place them, since they don’t need to be mounted against a wall.
A standard alcove-style tub might require more space because it needs to fit in between three walls. Freestanding tubs can be placed anywhere in the room, depending on the design. Some designs are extra-sized, while some are compact and narrower than other tubs.
Even the largest freestanding tubs will take up less space than an alcove-style tub because they stand freely and don’t need to fit in between walls or other fixtures. Freestanding tubs can also be beneficial to a small bathroom because they often have a more open and spacious feel.
How much space is needed for a walk in tub?
A typical walk-in tub requires at least 60″ x 30″ of floor space. Depending on the size of your bathroom, you may need more space if the tub has any extended end panels or if there are obstacles nearby like cabinets or a vanity.
You may also need extra room for a door to open and close. Finally, remember that you need at least 3 feet of clearance on all sides for easy access and to ensure the safety of the user. If the bathroom is small, it may be worth considering a half-width tub, which typically measure between 38” and 48” in width and still provide a comfortable, full-length soaking experience.
Are freestanding tubs out of style?
No, freestanding bathtubs are not out of style. In fact, they are becoming increasingly popular, especially in modern bathroom designs. Freestanding tubs are a great way to bring a sense of luxury, elegance, and sophistication to any bathroom.
These pieces are also highly customizable since they can be found in a variety of styles, shapes, and materials, making them perfect for any personal aesthetic. They can be also coordinated with other fixtures and finishes for a cohesive look.
Freestanding tubs are also highly functional and often come with features like armrests, whirlpool jets, or air bath systems for added comfort and relaxation. As such, freestanding bathtubs remain a timeless option for bathroom designs and are likely to remain popular for many years to come.
Why do new homes not have bathtubs?
There can be a few different reasons why new homes may not have bathtubs. The two most common reasons are due to cost or space constraints. In areas with high land costs, developers may opt to save space and money by not including bathtubs.
They may be replaced with smaller showers instead. Additionally, bathtubs are more expensive to install than showers and this could add to the construction costs of a home. Most new home consumers prefer stand-up showers as they offer a sleek and modern look and they take up less space.
Moreover, many builders are trying to reduce their water consumption and therefore opt to install showers which use significantly less water than a bathtub.
Are bathtubs becoming obsolete?
No, bathtubs are not becoming obsolete. Though showers are becoming increasingly popular and many modern bathrooms are being designed with shower enclosures instead of bathtubs, the bathtubs themselves are not obsolete.
Many people still enjoy the experience of relaxing in a hot bath, and for many people with mobility issues or other physical limitations, a bathtub can provide the only means to bathe. In addition, many styles of bathtubs are still highly sought after, as tubs made with luxury materials such as marble, stone, or acrylic may be viewed as a luxurious indulgence.
There is also a strong aesthetic aspect to bathtubs that many people enjoy, as they can be designed to fit any style of bathroom, from modern to traditional and everything in between. Finally, bathtubs are a great safety solution for bathing young children, as they provide the necessary stability while the water is filled to a comfortable level.
Is a freestanding bath worth it?
Whether or not a freestanding bath is worth it is a subjective decision. Many people think that the unique look of these stylish baths makes them a worthwhile investment, adding a touch of luxury to the bathroom that is often difficult to achieve with other types of baths.
Freestanding baths make a room look bigger due to their size and the way that they open up space. Additionally, these baths, which come in a variety of sizes, shapes, colors and materials, can often be more comfortable to use than other bath models due to their design.
However, as with any choice, there are pros and cons to consider. Freestanding baths can be more expensive than traditional baths, meaning they may not be an option for everyone. Additionally, they require more cleaning, and can be difficult to install due to the weight.
Depending on the material you choose, they may also be difficult to repair, requiring an expert to carry out any maintenance that is necessary.
Ultimately, deciding whether a freestanding bath is worth it is up to you, and your budget and personal taste should be taken into account when making your decision. They can be a great way to add a luxurious yet stylish touch to any bathroom, but may not be practical in all cases.