Skip to Content

Can a toilet tank be purchased separately?

Yes, you can purchase a toilet tank separately. This can be beneficial if you are looking to replace or update an existing toilet, as the tank itself is responsible for holding water for flushing and may become damaged over time.

Shopping for a separate tank can offer more choice in terms of capacity, style, and color, as you can choose from a wider selection than you would if purchasing a complete toilet set. When choosing a tank, it is important to consider the size of the tank, as a large tank may take up too much space in the bathroom, while a smaller tank may require multiple flushes to effectively clean the bowl.

Additionally, different tank designs come with different types of tank fill valves and flappers, both of which can help to control the amount of water in the tank. Most toilet tanks are made from vitreous china, but ceramic and plastic tanks are also available.

Can you just buy a new toilet tank?

Yes, it is possible to buy a new toilet tank. Depending on the type and brand of toilet that you have, there are a variety of options available for you to choose from. You can purchase a new toilet tank at your local home improvement or hardware store.

When looking for a new toilet tank, make sure that you are looking for one that is compatible with your existing toilet. Additionally, you should measure the size of the existing tank and match it with the measurements of the tank that you are considering purchasing.

Furthermore, when you buy a new toilet tank, you should also consider purchasing the necessary accessories like a fill valve, flapper, and other replacement parts that may be recommended by the manufacturer.

Are tanks for toilets universal?

No, tanks for toilets are not universal – there are several different types of tanks. The type of tank you need for your toilet depends on your particular toilet model and how it flushes. The most common types of tank for standard toilets are two-piece tanks and pressure-assisted tanks.

Two-piece tanks have a separate tank and bowl, while pressure-assisted tanks have a single tank and create a stronger flush. Many toilets also come with gravity tanks, which use the force of gravity to flush the toilet.

Specialized tanks are also available for low-flush toilets or toilets located in areas that experience cold weather. It’s important to research the type of tank your particular toilet requires before making a purchase.

Can you replace a toilet tank without replacing the bowl?

Yes, you can replace a toilet tank without replacing the bowl. Replacing the toilet tank is a straightforward project and follows the same process no matter what brand or model your toilet is. First, turn off the water supply and flush the toilet to empty out the water from the tank.

Then, use pliers to disconnect the water supply line from the valve inside the tank. Use a screwdriver to remove the nuts that hold the tank onto the flush. Lastly, lift and remove the tank, and then install the new tank, tightening the nuts with the screwdriver and reconntect the water supply line.

Once the tank is secured and the water turned back on, the tank should be filled and operational. When it comes to the bowl, however, you will likely want to replace the gaskets and putty instead of replacing the entire bowl as this is a more cost effective and time efficient approach.

How do I know what tank to buy for my toilet?

When researching tanks for your toilet, it’s important to know the size and type of tank needed for your particular toilet. The size of the tank and the water capacity needed for your toilet can vary depending on the type and model of the toilet you have.

To determine the tank size and water capacity, consult your toilet’s installation and operational manual. Most toilet owners can identify the type and model of their toilet by looking for a marking or stamping on the toilet’s bowl and tank.

Additionally, you will want to measure the dimensions of the space available for installing a toilet tank to ensure the tank you select will fit properly without taking up too much space in the room.

Tank types come in various designs and materials and should be chosen based on the setup of the toilet and the installation location. The most common tank size is a twelve-inch oval or round tank and fits most standard toilets, but it is always best to double-check the measurements of your toilet before selecting a tank.

Plastic tanks are generally easy to install and are affordable, but ceramic tanks are often more durable and can last longer under pressure from constant flushing. Lastly, consider the water capacity of the tank you select; if the toilet is in an area with a higher water bill, choosing a tank with a lower water capacity is the best option.

How much does it cost replace tank on toilet?

The cost of replacing the tank on a toilet can vary widely depending on the size and manufacturer of the tank, as well as the complexity of the installation. In general, replacing a tank only can range anywhere from $30-$300 depending on the above factors.

For a more precise estimate, it is best to contact a licensed plumber to provide an estimate after assessing the specific needs of the job.

Are toilet tanks a standard size?

No, toilet tanks are not a standard size. Toilet tanks come in all sorts of shapes, sizes, colors, and materials. The round toilet tanks are usually the most common and usually range from 10 to 15 inches in diameter, then 20 to 24 inches in length.

If a toilet tank comes with an overflow tube, it usually adds up to a few extra inches. On the other hand, elongated toilets, a newer version of the traditional round toilet tank, are designed to be a bit bigger and offer a bit more comfort.

They usually come in sizes of 14 to 16 inches in width and can range from 20 to 29 inches in depth. In addition to their size, there are a variety of materials used for toilet tanks and this can also vary from brand to brand, such as porcelain, ceramic, plastic, or stainless steel.

Lastly, when it comes to colors, there are plenty of options available, from classic white or black to bright reds and blues as well.

Is my toilet 10 or 12 inch?

The size of your toilet can vary depending on the type and model you have. Generally speaking, when it comes to residential toilets, the rough-in size is either 10 inches or 12 inches. This number represents the distance from the wall behind the toilet to the center of the drainhole in the floor.

If the distance is 10 inches, then you have a 10 inch toilet. If it’s 12 inches, then your toilet is a 12 inch model. If you are unsure of the rough-in size of your toilet and want to find out what size you have, you could measure the distance yourself using a tape measure.

Alternatively, you can check the manufacturer specifications, if you still have the instructions that came with your toilet, or you can look up the model on the manufacturer’s website.

What height of toilet is for seniors?

When considering the height of a toilet for seniors, it is important to think about both the comfort and safety of the individual. Generally, a toilet with a higher seat height (anywhere from 17-19 inches from the floor to the top of the seat) is preferred, as it can make it easier and more comfortable to get on and off.

Additionally, a high toilet can help reduce bending at the hips, providing better support for the individual’s legs and back. When looking for the right toilet, the American with Disabilities Act (ADA) recommends 17 to 19 inches as the standard height for people with mobility issues.

Ultimately, however, it is best to ensure the individual finds a toilet that is both comfortable and secure for them. That way, they can be sure that they are able to use it with no difficulty or risk of injury.

Can you replace the tank only on a toilet?

Yes, it is possible to replace the tank only on a toilet. Depending on the type of toilet, this might require some specialized tools. For most toilets, the procedure will involve shutting off the water supply, draining the tank, disconnecting the water supply line, unscrewing the bolts and lifting the tank off of the bowl.

Next, you’ll need to prepare the new tank by attaching the refill tube and flapper, installing new bolts and washers, and mounting the tank to the bowl. Finally, you’ll need to reconnect the water supply line, turn the water back on, and check for leaks.

Keep in mind that replacing the tank may involve additional steps, and you may need to purchase a wax ring or other parts in order to complete the installation. Therefore, it is important to make sure that the new tank is compatible with your toilet before beginning the replacement.

Will any toilet tank fit any bowl?

No, not any toilet tank will fit any bowl. Each toilet bowl and tank come as a complete unit, so the tank and bowl will be specifically designed to fit together. The two pieces connect to each other via a set of two bolts and rubber gaskets.

It is not possible to mix and match different tanks and bowls. Furthermore, some toilet tanks and bowls are designed to fit only specific brands and models, so even if the tanks are designed to fit the same type of bowl, they may not be compatible with each other.

Can a cracked toilet tank be fixed?

Yes, a cracked toilet tank can be fixed. The first step is to assess the kind of damage that is present. If the crack is not too severe, it may be possible to repair the crack using a special epoxy resin that is designed to fix porcelain surfaces.

Before attempting such a repair, it is important to make sure that the crack is completely clean and free of debris. Then the epoxy resin needs to be precisely applied to the damaged area in a thin, even layer, paying careful attention to ensure that it is thoroughly sealed.

Allow the epoxy to dry completely before refilling the tank with water.

In the case of a more severe crack, it may be necessary to replace the entire toilet tank. This kind of repair is more time-consuming and costly, and should only be done by a professional.

Why would a toilet tank randomly crack?

The most common cause is when the tank becomes worn out over time and the materials used to make it become brittle. Another cause is when a tank is hit with a hard object, such as a wrench or hammer, or when a tank is overfilled.

In addition, sudden changes in temperature and humidity can cause the material to warp, causing stress cracks to form. Lastly, toilet tanks containing a mixture of metals, such as steel and brass, can corrode over time due to chemical reactions, leading to stress fractures and eventually a crack.

Is it common for a toilet tank to crack?

It is not very common for a toilet tank to crack, but it can definitely happen. Cracking typically occurs when the water temperature is too high and the water expands the porcelain, causing it to become weakened and eventually crack.

It can also occur if the tank is not installed correctly, or if there are any existing cracks in the porcelain already. Additionally, if the toilet tank or lid is dropped or bumped hard enough, that can cause the tank to crack as well.

It is important to pay attention to the condition of your toilet tank and the water temperature, so you can detect potential problems early and assume measures to prevent the cracking.

What are the two most common problems repairs with toilets?

The two most common problems that are encountered during toilet repairs are a clogged toilet and a running toilet. A clogged toilet can occur when too much tissue is flushed at once, when toys or other objects are flushed, or when tree roots have infiltrated the pipes.

This will prevent the toilet from flushing properly, and sometimes the water level in the bowl can become quite high. A running toilet occurs when the fill valve fails to shut off after the toilet is flushed, or when the flapper at the bottom of the tank does not seat properly, or when something is blocking the float arm.

This will cause the water to continuosly run, leading to an increased water bill. Both of these problems can sometimes be resolved with a quick fix, such as replacing the flapper, or using a plumber’s snake to clear out debris from the pipes.

However, in more complicated cases, it’s best to call a professional plumber.