Skip to Content

Can I put an elongated toilet in a small bathroom?

Yes, you can put an elongated toilet in a small bathroom space. However, it must be properly measured and installed to ensure that it fits and doesn’t take up too much space. Additionally, consider the fact that an elongated toilet can take up around 2 additional inches, so the space may be a bit more cramped.

When making a selection, think about which type of toilet would work best for your bathroom. You should also consider the shape of the bowl and look for a style that won’t extend too far into the room.

Lastly, be sure to consult a professional installer for advice on which option would be best for your particular space.

What is a good toilet for small bathroom?

A good toilet for a small bathroom is a compact toilet. Compact toilets are typically shorter and take up less floor space than most standard toilets, making them ideal for a small bathroom. They can also be equipped with a low profile tank to reduce the footprint of the toilet further.

Additionally, many compact toilets are designed with elongated bowls, which can provide a greater amount of seating space without sacrificing too much floor space. There is a wide selection of compact toilets available, including traditional styles, tankless designs, wall-mounted models, and more.

To find the right one, it’s important to consider the style of your bathroom, as well as the amount of space you have.

Do elongated toilets take up more space?

Yes, elongated toilets take up more space than round toilets, as they are longer and typically wider than round toilets. An elongated bowl is typically 2-3 inches longer than a round toilet, and also 1-2 inches wider.

This makes them a bit more difficult to fit, depending on the size of the bathroom and the amount of available space. Additionally, installing an elongated toilet often requires some additional floor repairs and renovations, since the size of the toilet can be a bit of an issue when it comes to fitting it in the bathroom.

Therefore, elongated toilets do take up more space than round toilets, and thus can require more planning and renovation when installing.

How much space do you need for an elongated toilet?

For an elongated toilet, you need to factor in a minimum of 30 inches from the center of the toilet to the wall or any other objects for proper clearance. You also need to ensure that there is 12-15 inches of space from the front of the toilet to the nearest object.

If possible, you should leave at least 24 inches of space between the toilet and any side walls. Additionally, an elongated bowl has a wider opening than a round one so it will require more space.

Can I replace round toilet with elongated?

Yes, you can replace a round toilet with an elongated toilet, but depending on the space you’re working with, it may or may not be practical. Elongated toilets are typically 2″ longer from the wall to the mounting hardware than round toilets, making them a better fit for larger spaces.

However, if the space you’re working with is limited and you want to switch to an elongated toilet, you can purchase a toilet designed to be installed in cramped spaces. When making the switch, you’ll also need to purchase a new toilet seat and other mounting hardware that is designed for the shape of the toilet you’re installing.

Additionally, if you’re switching to an elongated toilet, you’ll need to make sure the toilet flange is at least 12-inches away from the wall. Once you’ve purchased all of your materials, contact a professional plumber to safely install the new toilet.

Why would I want an elongated toilet bowl?

An elongated toilet bowl is ideal for a number of reasons. It provides a larger, more comfortable seating area and the bowl length adds extra pressure to the flushing action. An elongated bowl can also help to prevent splashing and can be especially beneficial for elderly and larger individuals, providing them with extra stability and comfort when using the toilet.

Additionally, an elongated toilet bowl can increase the overall aesthetic of the bathroom as it often has a more contemporary, smoother look and feel.

Do people prefer round or elongated toilets?

The preference for round or elongated toilets depends on personal preference, accessibility, and the size of the bathroom.

Generally, round toilets are more compact, making them best suited for small bathrooms. They are also often the more affordable option. Additionally, they may offer more legroom, making them better suited for individuals with limited mobility.

Elongated toilets provide a more comfortable seat, as they are generally longer and slightly deeper. This design is ideal for larger bathrooms, such as those in master bathrooms. However, they may require more floor space, making them less suitable in smaller bathrooms.

Ultimately, the preference for round or elongated toilets will depend on a combination of factors. Consider the size and shape of the bathroom, cost, accessibility needs, and personal preferences.

Are elongated toilets better for seniors?

Yes, elongated toilets can definitely be better for seniors. Elongated toilets provide more surface area and increased comfort while sitting down due to their size, making them easier and more comfortable to use for older adults.

Additionally, elongated toilets are also typically taller, giving seniors more support when transferring from a standing to sitting position, making it safer. They also offer a slower closing lid to prevent pinching fingers and offer more stability on slippery floors, making it a safer option for seniors.

Additionally, these toilets are more aesthetically pleasing, adding a bit of sophistication to a bathroom instead of the standard round shape. Ultimately, elongated toilets are a great option for seniors due to the increased support, comfort, and safety that they offer.

What is one benefit of installing an elongated toilet bowl as opposed to the traditional round style bowl?

One key benefit to installing an elongated toilet bowl over a traditional round style bowl is increased comfort. An elongated bowl is broader and shaped to support the natural curves of the body, providing a comfortable and ergonomic seating experience.

This is especially beneficial for taller individuals, or those with larger physiques that may find traditional round toilet bowls to be too cramped or uncomfortable. Additionally, because they often have wider rims, they tend to be more stable and less likely to wobble or rock when sat on.

Do Round toilets flush better than elongated?

The answer to this question depends on your individual needs and preference. Round toilets generally use less water per flush since the bowl is smaller, so they’re better for those looking for a more water-efficient option.

Meanwhile, elongated toilets have a longer bowl and are more comfortable for shorter people and those with mobility issues, making them a better option for those looking for more comfort. Ultimately, the decision comes down to personal preference and usage, as both types of toilets can provide efficient flushing performance.

Additionally, both types come in a variety of sizes and styles, so you can find an option that fits perfectly with your bathroom.

Are most toilets 12 inches from wall?

The answer to this question is: it depends. Generally speaking, the majority of toilets are 12 inches from the wall, however not all toilets fit this standard. For example, toilets that are made for small bathrooms or ADA-compliant toilets often have to be closer to the wall than 12 inches in order to fit the space.

Some toilets are also designed to be further away from the wall in order to give the user more room to move around. Therefore, it is important to measure the space you have available before choosing a toilet to ensure that it fits your needs.

What is the most popular toilet shape?

The most popular toilet shape is the round bowl design. This is the standard style that has been around for many years and is the most commonly found in bathrooms. It is also the cheapest and easiest to install and replace.

The round bowl is made of either white porcelain or a plastic material, which allows for easy cleaning since there are no tight corners to catch debris or dirt. This style also takes up less room, making it perfect for smaller spaces.

Additionally, this design works with a variety of designs, from traditional to modern, making it easily customizable to fit any home’s personal aesthetic.

How often should toilets be replaced?

Toilet replacement depends on the age of your toilet, usage, and type of toilet. Typically, an older toilet may need to be replaced every 10-15 years, but may last as long as 25 years or more in some cases.

It is also important to assess the condition of the toilet before you opt for replacement. If your toilet is showing signs of age such as cracked porcelain, deteriorating wax seals, or excessive mineral deposits, it may be time to invest in a new toilet.

In addition, if you have a single flush toilet, you may notice that it needs to be flushed more than once to effectively clear the bowl. If this is often the case, you may want to consider replacing the toilet to a dual flush model to reduce your water consumption.

Generally, replacing the toilet will help to reduce the likelihood of plumbing issues such as clogs and overflows in the long-term.

How long is too long toilet?

When it comes to toilets, there is no universal “right” length. Every bathroom and individual is different, so the best way to determine if a toilet is too long for your particular space is to measure the length available and compare it to the dimensions of the toilet model you’re considering.

If the toilet extends beyond the available area, it might be too long for the space. Additionally, taking into account how much floor area you have available is important, so you can factor in the location of the toilet, as well as the ability to move freely between it and the other elements in the bathroom.

What is the closest a toilet can be to a wall?

The closest a toilet can be to a wall is dependent on the design of your toilet and the type of installation you are going for. Generally speaking, toilets that are mounted on the wall should have at least 6 inches of space between the wall and the toilet.

If the toilet is mounted on a floor, the space should be at least 12 inches. There should also be at least 6 inches of space between the wall and the back of the toilet bowl for waste and pipe connections.

To create more space for accessibility, there should also be at least 24 inches of space between the side of a toilet and a wall. To make sure that you have the exact measurements for your toilet and bathroom, be sure to consult a professional plumber or builder.