Skip to Content

Can I use PEX for shower valve?

Yes, you can use PEX for a shower valve. PEX is a flexible plastic tubing that is resistant to corrosion and cracking, making it an ideal choice for plumbing in showers because of its durability. PEX is often used in combination with other fittings such as copper or stainless steel, but it can also be used by itself.

When using PEX for your shower valve, it needs to be connected to an existing water supply line and connected to the hot and cold water valves of the shower. PEX is also used for the water supply and drain lines leading up to and from the shower.

It is important to use the correctly sized and rated PEX tubing for each application, as larger diameter tubes may not fit in some fittings. Additionally, when connecting PEX to metal components, a sealant must be used to ensure a secure fit.

Can I use PEX between valve and tub spout?

Yes, you can use PEX between the valve and the tub spout. PEX is a versatile piping material that is frequently used in plumbing projects. It is resistant to microbes, making it a good choice for safety and sanitation, and it is also able to withstand temperatures up to 200°F, making it suitable for hot and cold water use.

It is also relatively easy to install and requires very few tools, so it is relatively inexpensive to use. Generally, you will need to attach a PEX fitting to each end of the tubing, and then attach them to the valve and spout.

Be sure to double-check your measurements as you work to make sure that all parts are the right size for each other.

Can PEX withstand hot water?

Yes, PEX is able to withstand hot water. PEX tubing is made of cross-linked polyethylene, which is a type of plastic material that is highly resistant to heat. It is designed to withstand temperatures of up to 200°F (or 93°C).

Additionally, PEX can be used with radiant heating systems, which are typically heated to temperatures of up to 180°F (or 82°C). However, it is important to note that PEX may be more prone to premature failure if it is not properly installed or if the temperature exceeds its designed tolerance.

Therefore, it is important to make sure that all installations are up to standard and that the temperatures observed are within acceptable limits.

How do you connect a PEX to a Delta shower valve?

To connect a PEX pipe to a Delta shower valve, you will need a few additional plumbing supplies and tools. First, you need to prepare the PEX pipe. Cut the pipe to length using a PEX pipe cutter, then slide a brass or copper crimp ring onto the end of the PEX pipe.

Next, insert a PEX barb fitting into one end of the PEX pipe, making sure the barb fitting is properly seated within the crimp ring.

Once the PEX barb fitting is in place, it’s time to make the connection to the Delta shower valve. Remove the handle and escutcheon plate from the valve, then unscrew the threaded tailpiece. Now, slide a copper sweat adapter onto the exposed end of the PEX pipe, making sure it is wide open.

Once the sweat adapter is in place, use either Teflon tape or thread sealant to ensure a good seal between the threads of the sweat adapter and the Delta shower valve.

With the adhesive applied, simply screw the sweat adapter onto the threaded tailpiece. You can usually do this with your hands, but you may need to use an adjustable wrench to tighten it if it’s difficult to reach.

Ensure there is a tight seal between the sweat adapter and the Delta valve, then re-attach the handle and escutcheon plate. To finish, turn on the water for a quick test and make sure nothing is leaking.

Where should you not use PEX?

PEX is not suitable for outdoor use, as it is not rated for UV exposure and extremely cold temperatures. It is also not recommended for submergence in water, as it is not rated for aquatic use. Depending on the job, it may not be suitable in hot or abrasive environments either, as the material can become brittle when exposed to high temperatures, and abrasions can reduce the life of the product.

In addition, PEX is not designed to be used to transport compressed air because the material may not be strong enough to withstand the higher pressure.

At what temperature will PEX burst?

The maximum temperature PEX pipes can handle is 200°F. Above this temperature, the pipe could burst. PEX pipe bursts are most likely to occur due to fluctuation between hot and cold temperatures, caused by drastic shifts in the weather.

This can cause the pipe to expand and contract drastically, resulting in ruptures and cracks. In most cases, it is not the temperature that causes the PEX pipe to burst, but the stresses associated with extreme temperatures.

If the pipe temperature rises to a point that the PEX material becomes soft, it increases the chances of bursting significantly, even in temperatures below 200°F.

Is Blue PEX OK for hot water?

Yes, Blue PEX is generally suitable for hot water applications. It is made fromCross-linked Polyethylene (PEX) and is designed to last for many years in potable water, hydronic heating, and other hot and cold water applications.

Blue PEX is constructed from high-density polyethylene (HDPE), which has some distinct advantages over other water pipes, such as being resistant to freezing, bursting, puncturing, and corrosion as well as being easier to bend and cut compared to other materials like copper, PVC, or steel.

It also has a high-temperature rating of up to 200°F and is a reliable choice for hot water supply pipes, baseboard heaters, or any hot water application. Therefore, because of its excellentstrength, resistance to corrosion and temperature rating, Blue PEX is an excellent choice for hot water applications.

Do PEX pipes burst?

Yes, PEX pipes can burst if not installed and maintained properly. PEX pipes are relatively resistant to bursting when compared to other types of pipes, such as copper, but they are still subject to a range of potential problems.

These include freezing, corrosion, high water pressure, mineral deposits, and aggression from solvents and chemicals. These issues all have the potential to cause PEX pipes to burst, leading to water damage and expensive repair work.

It is important to properly insulate PEX pipes to prevent them from freezing, as this is a common cause of bursting pipes. You should also make sure to check the water pressure in your home regularly and install a pressure regulator or have your pipes regularly inspected to identify any problems as early as possible.

It’s also important to use the right type of pipes for specific water installations, as different pipes are designed to deal with different water flows. Finally, use non-destructive chemicals when dealing with clogs, as aggressive cleaning products can damage PEX pipes.

Can you connect PEX directly to faucet?

Yes, you can connect PEX directly to a faucet, but there are a few steps that you must follow to safely do so. The first step is to make sure that you are working with the correct fitting. PEX tubing requires an insert fitting that consists of an Insert barb fitting, the PEX crimp ring and the PEX crimp tool.

The insert barb fitting should properly fit the size of the tubing and the size of the faucet. Once you have the correct fitting, use the crimp tool to crimp the crimp ring onto the tubing. Make sure the crimp ring is fully crimped in place so that it is secure.

After the crimp ring is in place insert the tubing into the insert barb fitting and then slide the faucet onto the fitting. You may need to use a wrench to securely tighten the connection. Once the connection is secure, turn the water supply back on and test the connection by turning on the faucet.

If everything is connected properly, it should work as intended.

Can SharkBite be used for tub spout?

Yes, SharkBite can be used for tub spouts. SharkBite fittings are designed to be used with copper, CPVC, PEX, and PE-RT pipe and are perfect solutions for replacing, adding or repairing water line connections, especially in tight spaces.

SharkBite Push-Fit connectors are the easiest way to join and repair copper and PEX pipe, and don’t require any special tools or extra preparation of the pipe.

To connect a tub spout with a SharkBite fitting, simply cut the pipe to length, measure, and mark the cut. Make sure to use the appropriate pipe cutter or saw for the material. Then use SharkBite’s deburr and cleaning brush to clean the inside and outside of the pipe and fitting.

Push the fitting onto the copper or PVC spout and then slide the pipe into the fitting until it stops. Make sure the o-ring is still in place, then tighten the ring with the included clamp. Once tightened, check for leaks.

No soldering is necessary!.

SharkBite is a reliable, user-friendly solution for installing and repairing plumbing. It is a great tool to quickly and efficiently add or replace a tub spout.

Do plumbers recommend SharkBite?

Yes, plumbers typically recommend SharkBite when it comes to plumbing projects and repairs. SharkBite is a type of push-fit system of plumbing fittings and connectors that are designed to be quick and easy to use.

These systems eliminate the need for soldering pipes and fittings, making repairs simpler and faster. With SharkBite products, anyone can do a DIY project or repair without needing specialized plumbing knowledge or experience.

They also make it easier for plumbers to quickly access, work on, and repair a plumbing system. Plumbers also trust SharkBite for its quality. The company is well known for making reliable and leak-free connections through its fittings using O-ring seals.

Their products have been tested for durability and reliability at certified facilities to ensure that the highest quality standards are met.

Do professionals use SharkBite?

Yes, professionals commonly use SharkBite products for residential and commercial projects. SharkBite offers a variety of products, including push-to-connect fittings, valves, manifolds, plumbing and drainage systems, and supports for various plumbing, HVAC and industrial applications.

Their products are especially popular for large scale projects and tight workspaces, thanks to the easy installation that doesn’t require soldering, clamps, glue, or threading. The wide range of types, sizes, and fittings available in their products make it easy to find the right one for any plumbing job.

Additionally, SharkBite products are cost-effective, durable, and backed by a 25-year warranty.

Can I replace a shower valve myself?

Yes, you can replace a shower valve yourself. However, before attempting a do-it-yourself project, it is important to make sure you have the right tools and are comfortable performing the task as it involves working with water and electrical lines.

The first step is to turn off the water supply to the shower. Then, remove the shower trim and escutcheon plate. Disconnect the plumbing fixture from the wall and remove the old components. Before replacing the shower valve, clean the wall and valves, so all dirt and debris is removed.

When you are ready to begin, place the new valve and the escutcheon plate in the wall, making sure the valve is in the correct orientation. Install the new valve and attach the plumbing to the back of the valve.

Make sure to use the correct type and size of pipe and fittings, such as brass and copper. After you have attached the plumbing, attach the trim and finish with caulking.

Finally, turn on the water and check for leaks. If everything is working properly, you can enjoy your new shower valve.

Can you replace shower valve without removing tile?

It is possible to replace a shower valve without removing tile, however, it is not recommended as it can be difficult to access the valve and you could end up damaging the tile if it’s not done properly.

If possible, it’s best to remove the tiles around the area of the valve so you can do the job properly and avoid any potential damage. If that’s not an option, then there are a few steps you can take to help make the job easier.

First, make sure to turn off the water to the shower before you start. Then, use a core drill kit to drill through the tiles and gain access to the valve. You can also use an angle grinder to cut out a portion of the tile so you can access the valve and take it out.

Once that’s done, you can install the new valve without having to remove the tile. Make sure to caulk the area afterwards to make sure it’s sealed properly.

Do you need plumber to change shower valve?

Yes, typically a plumber is needed to replace a shower valve. A shower valve controls the flow and temperature of the water in the shower and the result of improper installation or repair can be very costly in the long run.

A plumber will have the necessary knowledge and experience to safely and properly install the new valve. They will also have the tools and supplies to complete the job and make sure the valve is suitable for the existing plumbing system.

In addition, a plumber will be able to inspect the existing plumbing and identify any other issues that may impact the installation. It is important to hire a licensed and experienced plumber to avoid any problems down the line.