Yes, you can change the tank on a toilet, but it is recommended that you consult with a professional plumber for the best results. Toilet tanks can be complicated and require specific technical knowledge to install them properly and to make sure that all the parts are connected properly.
Depending on the type of toilet you have, the tank may require some extra tools and hardware to install properly. If you attempt to replace the tank yourself, you might end up damaging it or not having it fit correctly, which could cause water leakage and other issues.
With the help of a professional plumber, the tank should be able to be replaced with no issues.
Can you replace a toilet tank without replacing the bowl?
Yes, you can replace a toilet tank without replacing the bowl. This is a relatively straightforward home renovation task that you can typically accomplish in an hour or so, depending on the complexity of the new tank and the make and model of the toilet.
The most important thing to consider when replacing a toilet tank is the height of the new tank and the need to stay in line with the existing bowl drain. If the tank is too tall or low, the waste pipe won’t attach to the bowl and won’t properly drain water.
To ensure a successful replacement, you’ll need to know the size of your current tank and the type of faucet and valve it has. You’ll also need to buy a toilet tank that fits your existing bowl. After doing so, start by turning off the water supply to the toilet and draining the water reservoir.
Then, disconnect the tank by unscrewing the nuts and bolts that hold it to the bowl. Once that is done, you’ll be able to remove the tank and attach the new one. Make sure the new tank is level with the bowl and then reattach the water supply, replace the lid, and fill the tank with water.
Finally, check for leaks, adjust the float level, and you’re all set.
Can you mix and match toilet bowls and tanks?
Yes, it is possible to mix and match toilet bowls and tanks. While most builders and plumbers will likely take a single style and type of toilet bowl and tank combination and install it throughout a bathroom, there are no rules that say you have to do so.
You can mix and match different styles and types of toilet bowl and tank combos. However, when doing so, it is important to make sure that whatever type of tank you choose is compatible with the bowl.
Manufacturers typically list which type of tanks are compatible with their toilet bowls, so it is important to consult that list to ensure compatibility. In some cases, you may need to purchase new hardware to ensure a secure fit.
Additionally, it is important to make sure you match finishes correctly to ensure a stylish and aesthetically pleasing look.
Are tanks for toilets universal?
No, tanks for toilets are not universal. The size and shape of the tank may vary depending on the type and style of toilet, and even the size and shape of the bathroom. Standard tanks are typically around 12 to 14 inches high, 18 to 22 inches wide, and 8 to 10 inches deep, but these sizes and shapes can vary depending on the type of toilet.
Some tanks may also have different features depending on the style, such as raised and lower sides, cubbies for storage, and built-in connections for a variety of accessories and water features. When measuring for a tank, it is important to measure the length, width and depth of the toilet’s rough-in opening to ensure compatibility with the tank you are purchasing.
Additionally, the tank must be able to rest securely on the toilet’s base and compartment, for sufficient water and waste capacity, and be able to provide a secure connection with your drainpipe.
How much does it cost to change a toilet tank?
The cost to replace a toilet tank can vary depending on the type of tank and the type of floor the toilet is on. Generally the cost of a basic toilet tank can be anywhere from $50-$200. However, the cost can be higher if you are replacing the entire toilet assembly, meaning both the tank and the bowl.
This can be anywhere from $150 to upwards of $500. If you decide to hire a professional plumber to install the toilet tank, the cost can be anywhere from $75-$200 or more depending on the complexity of the installation and the type of materials used.
If you are replacing a toilet tank in a basement or crawlspace, additional installation labor might be required which can increase the cost. If you decide to purchase a tank that has additional features such as a dual flush or an integrated bidet, the cost can range from $250 to over $1000.
How do I know which toilet tank to buy?
When it comes to buying a toilet tank, there are a few key factors you should consider. First, determine the size of the space you have in which to install the tank. You can measure the space and check the dimensions of any tank you are considering, to make sure it will fit.
Next, pick the style of tank you want. This could range from traditional to contemporary, or anywhere in between. You may also want to consider a tank with a low-flow mechanism to improve water efficiency.
If there are other features you prefer, such as quiet flush, self-closing lid, and heated seat, check for these features as well. Additionally, you’ll want to select a tank that meets your budget. Finally, consider the type of toilet bowl you will pair it with to ensure compatibility.
With all these factors in mind, you should be able to find the perfect toilet tank for your project.
Are toilet tanks a standard size?
No, toilet tanks are not a standard size. The size of a toilet tank will vary depending on the manufacturer and the model. Generally, round tanks come in two sizes, while elongated tanks come in three sizes.
Round tanks are typically either 10 or 12 inches in height and width, while elongated tanks are typically 10, 12, and 14 inches in height and width. The size of a toilet tank is important because it affects the amount of water that it can hold, as well as the pressure of the flush.
It is important to measure the space available for the toilet tank before purchasing, in order to find the most suitable size.
Is it better to buy a 1 piece or 2 piece toilet?
Whether you should buy a 1 piece or 2 piece toilet comes down to your own personal preference, budget and available space.
A 1 piece toilet typically has a more integrated look, as all the components are built into one single unit, making it easier to install. This style usually requires fewer tools, makings it a popular choice for homeowners looking to upgrade their toilet quickly.
On the other hand, 1 piece toilets usually cost more than their 2 piece counterparts.
A 2 piece toilet consists of a separate tank and bowl, making it a great option for larger bathrooms. It also often costs less than a 1 piece toilet. That being said, the installation can be a bit more difficult, as it tends to require more tools and precise measurements to ensure a proper fit.
At the end of the day, it comes down to personal preference, as well as your budget and available space. Consider the look and installation process of each type of toilet to decide which one is best for you.
Why does toilet tank crack?
There can be several reasons why a toilet tank may crack, and it is important to determine the cause of the crack before attempting to make repairs. One common reason that a toilet tank may crack is due to high water pressure.
When the water pressure is too high, it can cause the tank to become stressed and lead to cracking. It can also be caused by the tank expanding when exposed to high temperatures for a long period of time.
This can result in the tank cracking due to the build-up of pressure from the expansion. Additionally, the tank may crack due to age or wear and tear over time, as the tank can become brittle and crack due to constant exposure to water and chemicals.
Finally, the tank may crack due to misalignment or improper installation, as this can put strain on the tank and cause it to crack. Regardless of the cause, it is important to address any cracks in a toilet tank in order to prevent more extensive and costly damage to the tank and the toilet.
Do all toilets fit the same?
No, not all toilets fit the same. Toilets come in many shapes and sizes, including round and elongated. Round toilets are typically less expensive and easier to install, and are optimal for small bathrooms.
Elongated toilets are more expensive, but provide a larger and more comfortable seat. Additionally, toilets come in various heights–standard, chair, and comfort/universal–to accommodate different users.
The width of the toilet also varies, so it is important to measure the distance from the wall to the center of the toilet flange to choose the correct toilet for your space. Additionally, many toilets vary in terms of features, such as one and two-piece designs, flush capabilities, and water-saving features.
Lastly, it is important to consider any existing plumbing needs and space constraints when choosing the correct toilet for your space.
When replacing an older toilet the new toilet can use no more than how many gallons per flush?
When replacing an older toilet, the average new toilet can use no more than 1. 28 gallons of water per flush. This is in accordance with the Energy Policy Act of 1992 and recent efficiency standards that require all new toilets made in the United States to use no more than 1.
28 gallons per flush. This amount is significantly less than older toilets, which could use as much as 7 gallons of water per flush. By installing a new toilet, you can save on your water bill and reduce your water consumption, which can help conserve natural resources.
Do new toilets come with tank parts?
Yes, when you purchase a new toilet, it will typically come with all the parts you need to install it, including the tank parts. The tank of a toilet is made up of several components that all need to be in place for the toilet to function properly.
These typically include a flush valve, fill valve, flapper, tank lever, tank to bowl bolts and gaskets, and related hardware. It is important to note, however, that the tank parts that may come with the toilet may vary depending on the specific model and manufacturer.
How do you flush a toilet with a broken tank?
If your toilet has a broken tank, it can be quite difficult to flush. However, there are some steps you can take to try and flush a toilet with a broken tank.
The first step is to try and identify what part of the tank is broken. If the problem is a broken tank lid, the problem can often be solved by simply replacing the lid. If not, then you may need to look at further solutions.
If the tank is completely broken, or the handle is completely disconnected, then you can attempt to flush the toilet by manually manipulating the chain or lever inside the tank itself. Start by shutting off the water valve behind the toilet and then locate the tank.
Carefully, reach your hand into the tank and locate the chain, lever, or valve mechanism. Once you have located the chain or lever, try and activate it by pulling it up and down. This should cause a flushing action and should help to get rid of the water and waste.
If this does not work, then you may have to look at replacing the entire toilet tank or handle mechanism. Doing this can be quite complicated, so you may want to call in a professional to make sure the job is done correctly.
Will any toilet tank fit any bowl?
Generally speaking, no, any toilet tank cannot fit any bowl. Toilets come in different sizes and shapes, and even the same models can vary in size depending on the manufacturer and year. To ensure your tank will fit properly, it’s important to match up the tank to the appropriate bowl.
A tank that is too small for the bowl could cause leakage or incorrect functioning, while a tank that is too large for the bowl could cause the tank to not fit properly. You should always measure your tank and bowl before purchasing a new one to make sure they are compatible.
Additionally, it is important to have access to the proper toilet mounting hardware so the tank can be connected properly to the bowl.
How do I attach the tank to the toilet bowl?
Attaching the tank to the toilet bowl is a relatively simple process. Start by placing the tank in the desired location and making sure it is level and secure on the floor. Then line up the openings on the back of the tank with the holes on the toilet bowl.
There should be two holes near the back of the bowl, one for the water supply hose, and the other for the toilet fill valve. Once the two openings line up, it is time to attach the tank to the bowl. Usually there are two long bolts that come with the tank, which will be used to secure the bolts to the porcelain.
The bolts will have washers and wingnuts attached. Place the washers on the bolts and then carefully thread the bolts downward through the holes in the tank and into the holes in the toilet bowl. Be sure to not over tighten the bolts as it can damage the porcelain of the bowl.
Once the bolts are in place, securely tighten the wingnuts. It is best to use a wrench when tightening the wingnuts to make sure they are properly attached. Finally, attach the water supply hose to the fill valve and turn on the water supply.
The tank is now securely attached to the toilet bowl.