Skip to Content

Can you level a toilet with shims?

Yes, it is possible to level a toilet with shims. Toilet shims, which are made of plastic or metal, are used as spacers to adjust the height and level a toilet. The shims are placed between the toilet base and the floor.

Depending on how uneven the floor is under the toilet, it may be necessary to add more than one shim for stability. Toilet shims can also be used to level a rocking toilet. Toilet shims enable adjustment of from 1/16 of an inch to 1/8 of an inch.

It is important to ensure that the toilet is secure after shimming it. It should not be rocked or moved when sat on.

Can you use shims to level a toilet?

Yes, you can use shims to level a toilet. Shims are thin pieces of material, typically plastic or metal, and are designed to fit between two objects in order to level them or fill in gaps between them.

In the case of a toilet, shims can be used to level the toilet and make sure it sits flush against the floor. To use shims, you first need to place them under the toilet, using a level to ensure the toilet is even.

Then, you should check the stability of the toilet and make sure it is secure. If the shims aren’t secure, you can secure them by fastening them with screws or adhesive. Once the shims are in place, you should check the toilet again to make sure it is secure and level.

How do you shim a toilet on an uneven floor?

Shimming a toilet on an uneven floor requires a few basic supplies and a little bit of knowledge. The first step is to purchase shims. These shims come in different sizes, colors and materials to fit the need of what you are trying to do.

Once the shims are purchased, place them underneath the toilet by the bowl. You may need to adjust the number of shims depending on the height and level of the floor. Be sure to place the shims evenly along each side of the toilet.

Also, check that the closet bolts are even with each other. After the shims are in place, use a level to make sure the bowl is level on the floor and using a caulking gun, caulk the gaps surrounding the toilet and shims.

This will help hold the shims in place and seal the toilet from water damage. Finally, the toilet must be secured to the floor using a plastic tapcon screw. Put this in the center of each closet bolt, securing the toilet and shims to the floor.

This should successfully shim the toilet for an even fit on the floor.

How do you level a uneven toilet?

To level an uneven toilet, you will need to work with the bolts that attach it to the floor. Start by pressing down on the toilet bowl until it is swimming level with a carpenter’s level. Gently rock the toilet back and forth to determine where it needs the most adjustment.

Using pliers or an open end wrench, loosen the flange bolts if needed, to allow the toilet to move slightly. Check the level again and adjust the bolts until it is level. Depending on how uneven the floor is, several adjustments may be needed.

Once the toilet is level, tighten the flange bolts and add plumber’s putty if necessary. Push down on the toilet to make sure it is sturdy and secure. Finally, check the bowl one more time with the carpenter’s level to ensure it is even.

Does a toilet need to be perfectly level?

No, a toilet does not need to be perfectly level. The National Plumbing Code specifies a maximum deviation of 1/8th of an inch from side to side and 1/4th of an inch from front to back. However, it is still important that the toilet is installed close to level because an unlevel toilet can cause problems with how well the toilet flushes, how well the toilet tank seals and even how well it seats when people use it.

Additionally, it is important to ensure that the toilet is firmly and properly mounted to the floor since it must bear the weight of anyone who sits on it. While a toilet does not need to be perfectly level, it is important it is installed close to level and securely anchored to the floor.

Will an unlevel toilet leak?

Yes, it is possible for an unlevel toilet to leak. If the toilet is crooked and uneven, it can cause two major issues: water leakage and a poor seal on the toilet. Water leakage can occur if the toilet is unlevel, causing water to flow from the tank to the bowl unevenly, resulting in water running into the bowl and onto the floor.

A weak seal can also form if the toilet is unlevel, resulting in a leak from the tank to the bowl. To ensure the toilet is level and the seal is strong, it is important to check the toilet’s levelness regularly.

To do this, you can use a level to check the floor each time you clean the toilet.

What can I use to level my toilet bowl?

To level your toilet bowl, you will need a wax ring, a Phillips head screwdriver, a shim tool and a level. First, make sure the toilet bowl is empty, and then turn off the water supply to the toilet by finding the shut-off valve and turning it to the off position.

Next, use the Phillips head screwdriver to unscrew the bolts that hold the toilet bowl to the floor and remove the toilet bowl from the floor.

Afterward, check for any wax residue on the floor and if present use a putty knife to remove it. Take out the old wax ring and use a damp rag to clean the areas where the wax ring was placed. Now place the new wax ring on the toilet flange and press it down firmly.

Then, place the toilet bowl back on the floor and insert the new bolts. Lastly, use a shim tool and a level to make sure the toilet bowl is leveled properly and tighten the bolts. Turn the water supply back on and check for any leaks.

How do you hide toilet shims?

Toilet shims can be hidden quite easily using caulk or putty. If the shim is used to level the toilet, make sure that it is secure, then using a damp cloth, remove any dust or residue from the area around the shim.

Once the area is clean and dry, use a caulk gun to apply a silicone based caulk to the areas around the shim. Use the caulk to make sure that the shim is completely covered, then use a putty knife to ensure that the caulk is evenly distributed and that it has filled any gap between the toilet and the shim.

Finally, use a damp cloth to smooth out any excess caulk for a seamless finish.

Should a toilet wiggle at all?

No, a toilet should not wiggle at all. Wiggling could indicate that the floor or subfloor underneath the toilet is weak or damaged, or that the toilet is not mounted properly. Additionally, a wiggling toilet can often lead to water leakage that can cause significant damage to the floors and walls around it over time.

If you notice your toilet wiggling, it is best to contact a professional plumber to come assess the situation and make the necessary repairs.

Why is my toilet rocking side to side?

It is important to determine the cause of the rocking before it leads to more serious toilet plumbing issues like leakage from the bowl or the tank.

The most common cause of a toilet rocking is that the bowl has shifted slightly out of level. This will cause it to rock to one side when pressure is applied, such as when someone sits on it. A pipe snake maneuver can be used to level the bowl.

To do this, lift the toilet gently off the floor and twist it in order to level it.

Another cause of rocking is that the wax seal between the toilet bowl and the floor is no longer providing an effective seal. If this is the case, the wax seal may be broken, loose, or in need of replacement.

In this case, the wax seal should be replaced to provide a better seal.

Another cause of rocking is that the flange that connects the toilet to the floor may be corroded or otherwise damaged. In this case, the flange should be replaced.

Finally, the bolts that secure the toilet to the floor may be loose or missing entirely. If this is the case, bolts need to be secured.

In conclusion, a toilet rocking side to side can have multiple causes, ranging from a slightly out of level bowl to deteriorating or incorrect bolts. Any of these issues should be resolved quickly to prevent more serious toilet plumbing issues.

What happens if the toilet flange is not level?

If the toilet flange is not level, it can cause significant problems with the installation, use, and performance of the toilet. An improperly installed and/or improperly secured toilet flange may cause leaking at the base of the toilet or one of the sides, and even flange movement, creating abnormal noises during use.

The unevenness of the flange can create an imbalance for the toilet, making it difficult or impossible to secure it properly on the floor. That, in turn, can cause problems with the operation of the toilet, including water leakage, balance issues, and clogs.

Additionally, an unleveled flange increases the stress put on the wax ring and it may cause it to fail prematurely. Inadequate sealing of the flange can also lead to odour issues and a damaged bathroom floor.

It is important to ensure the toilet flange is level when installing a new toilet, or your toilet may not seal correctly, leading to potential damage and repair costs.

Is it OK for toilet flange to be level with floor?

In general, it is not recommended for the toilet flange to be level with the floor. The correct installation for a proper seal means the flange should be slightly above the finished flooring. This will help ensure the flange is correctly sealed against the bottom of the toilet to prevent leaks.

Additionally, incorrect installation can also cause damage to the flooring around the flange if installed too low, or create an uneven floor if installed too high. Ideally, the toilet flange should be set between 1/4” to 1/2” above the floor.

Should a toilet sit flat on the floor?

Yes, a toilet should sit flat on the floor for optimal performance and comfort. Setting a toilet on a flat surface allows for a more efficient flow of water and waste through the toilet’s plumbing. Additionally, this helps to avoid issues such as leaking and clogs.

When a toilet is installed properly on a flat surface that is level and even, it supports the weight of the toilet and spreads the pressure evenly. This helps prevent any cracks or damage to the toilet bowl and base.

Having a toilet that sits level on the floor also helps to provide comfort for users by allowing them to sit properly on the toilet seat. If a toilet is installed on an unlevel surface, it can feel uncomfortable and unstable.

For these reasons, it is important to ensure that the toilet is sitting flat on the floor.

How much slope does a toilet need?

The amount of slope that a toilet needs depends on its location in the bathroom and how it is plumbed. For most indoor applications, the toilet needs to be pitched at a slope of 1/4 inch per foot. This means that for every 12 inches of length, the toilet needs to be 1/4 inch higher than its starting point.

The slope of the pipe leading from the toilet should also be slightly greater than this. For example, for a 3-inch drain pipe, a 1/4-inch-per-foot slope would be otherwise insufficient, and a 1/2-inch-per-foot slope should be used instead.

Adequate slope prevents blockages and stagnant water in the pipes, keeping your plumbing system working properly.

How do I make sure my toilet is level?

Making sure your toilet is level is an important part of keeping it working correctly and is relatively easy to do. First, you will need to gather the necessary supplies. You should have a level, a rubber mallet, and a few wooden shims.

You can also use pieces of cardboard or wax paper if you don’t have shims or a mallet.

Next, you will need to place your level on top of the toilet bowl. If it’s not completely level, then you can use the rubber mallet to gently tap it into place. Depending on the size of the level, you may have to adjust the toilet slightly until it is parallel with the floor.

Finally, if your toilet is still not level, you can use the shims or cardboard to adjust it until the level sits perfectly flat on the bowl. Once the level is balanced, tighten the bolts at the base of the toilet to keep it in place.

If done correctly, your toilet should now be level and ready for use.