Skip to Content

Can you make splash toilet cleaner at home?

Making a DIY Splash Toilet Cleaner at home is quite possible! All you need is a few simple ingredients that you can probably find in your home already. To make it, you’ll need white vinegar, baking soda, and some essential oils of your choice.

Start by pouring ½ – ¾ cup of white vinegar into the toilet bowl. Next, add a generous sprinkle of baking soda. Finally, add a few drops of your favorite essential oils. This will give the toilet cleaner a pleasant smell while it cleans.

Let the mix sit in the toilet bowl for at least 15 minutes. Then, use a toilet brush to giving the bowl a good scrub. Rinse the brush thoroughly after each scrub. When you’re done scrubbing and rinsing, flush the toilet and you’ll have a sparkling clean bowl.

Make sure to use gloves when handling the ingredients, since the white vinegar and essential oils can cause skin irritation. And, of course, use this homemade cleaner only on unglazed porcelain toilet bowls.

What is the active ingredient in splash toilet cleaner?

The active ingredient in Splash toilet cleaner is hydrochloric acid, also known as muriatic acid. This acid is a corrosive, colorless inorganic chemical compound used to clean and remove calcium deposits, rust, and other deposits from bathroom fixtures and surfaces.

It is also used to adjust pH balance in swimming pool water. When used in a toilet cleaner, it dissolves mineral deposits and helps dissolve urine and fecal deposits. While hydrochloric acid is an active ingredient in Splash toilet cleaner, the product also contains water, surfactants to break down soils, builders to assist in buffering the pH, and fragrances and dyes for safety, appearance, and to mask the odor of the acid.

How do I make my own toilet gel?

Making your own toilet gel can be a rewarding and cost-effective project. Before you start, you’ll need to find a recipe, gather the necessary ingredients and then mix the ingredients together until you have a gel-like substance.

Here are the steps to help you make your own toilet gel:

1. Gather the ingredients – When making your own toilet gel, you’ll need to get hold of some basic ingredients, like water, vinegar, glycerin, essential oils, and sodium laureth sulphate or any other appropriate surfactant.

Depending on the recipe you are using, you may also need to add some other ingredients such as sodium hydroxide, alcohol, or sodium xylene sulfonate.

2. Combine the ingredients – After gathering the necessary ingredients, the next step is to mix them up. Start by combining the glycerin, water, vinegar, and essential oils in a bowl or measuring cup until all the ingredients are mixed evenly.

Next, add the surfactant to the mixture and stir until everything is well-combined.

3. Heat the mixture – To create the gel-like consistency, you’ll need to heat your mixture. Place the bowl or measuring cup into a saucepan filled with warm water and heat the mixture until it is hot, but not boiling.

Once it is hot, remove the bowl or measuring cup from the heat.

4. Cool and thicken – Allow the mixture to cool down before pouring it back into the bowl or measuring cup. It may thicken as it cools down. If it needs extra thickening, you can add more glycerin or alcohol.

5. Refrigerate and enjoy – To get the final product, simply put your mixture in an airtight container and let it sit in the refrigerator for a few hours, preferably overnight. Once it is ready, you can use it just like any other toilet gel.


Can I mix vinegar and baking soda in toilet?

Yes, you can mix vinegar and baking soda in your toilet; however, it’s best to use them separately for optimal results. For example, you could start by pouring some white vinegar into the bowl, let it sit for 15 minutes and then scrub any areas that are particularly dirty.

After that, you could sprinkle baking soda around the bowl and scrub it in with a toilet brush. This can help to remove any lingering odours and hard-water stains. For tougher stains, you may need to pour some more vinegar and baking soda together and let that sit for an hour before scrubbing it away.

Be sure to wear gloves while doing this, however, as the combination of vinegar and baking soda can create a minor chemical reaction that can cause skin irritation.

What two common household ingredients combine for an eco friendly toilet bowl cleaner?

Vinegar and baking soda are two common household ingredients that can be combined to make a natural and eco friendly toilet bowl cleaner. To use this combination for cleaning, first sprinkle 1/4 cup of baking soda into the toilet bowl.

Next, pour 1 cup of vinegar into the bowl and let the foaming mixture sit for 10 to 15 minutes. This combination acts as an abrasive cleaner that helps to remove buildup and stains in the bowl. After allowing the vinegar and baking soda to sit, use a toilet brush to scrub the sides and bottom of the bowl and flush.

This natural combination is safe for the environment and will not harm plumbing.

Can you leave baking soda and vinegar in toilet overnight?

No, it is not recommended to leave baking soda and vinegar in a toilet overnight because it can corrode the bowl and the plumbing. When baking soda and vinegar are mixed together, they form an acid that can damage the glazed surface of a toilet bowl and the pipes leading to it.

Additionally, due to the corrosive action of the chemicals, it could result in cracks in the bowl, which could create leaks and cause damage to the surrounding bathroom. It is recommended to use a toilet cleaner or a commercial product rather than baking soda and vinegar when cleaning a toilet.

To maintain a clean and safe toilet, it is important to regularly scrub with hot water and toilet cleaner, and flush out the bowl at least once a week.

Does vinegar damage toilet bowls?

No, vinegar does not damage toilet bowls. In fact, vinegar is a natural cleaning solution that is effective in cleaning many parts of the toilet and is often used to deodorize the bowl. It is important to note, however, that vinegar should never be used undiluted and should be used for short periods of time.

Additionally, it is important to avoid applying vinegar directly onto metal fixtures, as the acid in the vinegar can cause corrosion. When cleaning a toilet bowl with vinegar, only add a few ounces to a gallon of water and use a toilet brush to scrub around the bowl and the rim.

Follow up with a flush to rinse and remove the acidic solution.

How do you clean a badly stained toilet bowl?

Cleaning a badly stained toilet bowl can be a challenging task, but with the right tools and a bit of elbow grease, it can be made easier.

First, turn off the water valve and empty the toilet bowl by flushing several times. Then, use a toilet bowl brush to scrub away any dirt and grime that has built up on the sides and bottom of the bowl.

Next, use a plunger to push out any remaining material that is stuck in the drainpipe. Make sure to use an old towel to cover the hole and stop any dirt from entering the drain when plunging.

After that, use a toilet bowl cleaner to help break down and remove any stubborn stains. Be sure to read the bottle to determine whether you should use gloves and goggles when handling the cleaner. Follow the instructions to ensure the entire bowl is thoroughly treated, leaving it for the recommended time before flushing.

Finally, scrub the toilet bowl with a brush and some hot water to remove any remaining dirt. Once the bowl is clean and dry, you can apply a toilet bowl freshener to help keep it smelling pleasant.

With the right tools and a bit of work, a badly stained toilet bowl can be transformed into a sparkling, clean surface.

What is a home remedy for cleaning a toilet?

A home remedy for cleaning a toilet is to start by scrubbing the toilet bowl with a regular toilet brush, being sure to get around the edges. Next, mix a quarter cup of liquid dishwashing soap, two cups of white vinegar, and one cup of baking soda.

Pour the mixture into the toilet bowl and let it sit for 30 minutes. After 30 minutes, scrub the toilet bowl with the toilet brush and then flush. Finally, use an all-purpose household cleaner to wipe down the toilet exterior and any other accessible surfaces.

What does putting vinegar in your toilet tank do?

Putting vinegar in your toilet tank can do a few different things. First, it can reduce the amount of hard water scale build-up in your tank and toilet bowl over time. When combined with hot water, it helps to break down the accumulated deposits that are caused by calcium and magnesium found in the hard water.

This can help prevent clogs in your pipes and lead to a smoother flushing system.

Vinegar is also known to help freshen up the bathroom by eliminating odors. The acidic nature of vinegar neutralizes odors and can replace harsh chemical odor removers. Pour a cup of vinegar into your tank, leave it overnight, then flush in the morning and you’ll get a fresher bathroom with less smell.

Vinegar also acts as a natural cleanser. It can help break down tough stains and makes it easier to scrub your toilet and basin clean. To use it for cleaning, pour the vinegar onto a cloth or sponge and use it to scrub away dirt and grime.

Additionally, if you have lime or calcium buildup, use some vinegar and a scrub brush to get rid of the tough deposits.

Overall, putting vinegar in your toilet tank can help reduce hard water build-up and lime deposits, freshen up the bathroom, and act as a natural cleanser. Used regularly, it can help keep your toilet clean and ensure it continues to work properly.

What can I put in my toilet to prevent hard water stains?

Firstly, you should begin by using a limescale remover, such as white vinegar or citric acid, to get rid of any existing build-up. For ongoing prevention, there are products you can use in the tank itself such as tablets or tablets of citric acid, sequestering agents, or even chlorine tablets.

Additionally, you may want to use a spigot filter to remove any existing hard water. Finally, you may want to consider adding a water softener to help prevent new hard water stains from forming.

Can you put dishwasher tablet in toilet tank?

No, it is not recommended to put dishwasher tablet in the toilet tank. Dishwasher tablets contain detergents and other chemicals that could be potentially harmful for humans and will not break down in the water.

In addition, it can corrode metal parts in the toilet tank, leading to potential damage or leaks. Furthermore, the tablet can create a blockage in the pipes and cause a clog. To help keep your toilet tank and pipes clean and free from debris, it is best to use cleaning materials specifically made for toilets, like commercial toilet bowl cleaners.

What can I put in my toilet tank to make my toilet smell good?

There are a variety of things you can put in your toilet tank to make your toilet smell good, including oils, potpourri, special toilet deodorizers and air fresheners. Oils such as tea tree, peppermint, lemon or lavender are especially helpful in keeping your toilet smelling fresh, as these oils are antimicrobial and antifungal.

You can either put a few drops directly into the tank or soak a cotton ball or piece of cloth in the oil and put it at the bottom of the tank. Potpourri and special toilet deodorizers can also be a great way to make the toilet smell nice.

These are usually placed inside the tank and provide a pleasant aroma for a few weeks or months. Similarly, air fresheners such as gel or aerosol spray can also be placed in the tank, as long as they are labeled safe for toilet use.

Lastly, some households may choose to use baking soda or vinegar to help freshen up the toilet, but these measures are not permanent solutions and should be done on occasion rather than as a long-term solution.