No, you cannot put a 12 inch rough-in toilet on a 10 inch. Toilets typically range from 10 inch to 14 inch rough-ins, and those sizes cannot vary. The rough-in of a toilet is the distance from the wall behind the toilet to the center of the waste outlet on the toilet.
This is an important measurement to consider, as toilets with a wrong sized rough-in will not sit correctly or flush effectively against the wall. Therefore, when purchasing a new toilet, you must make sure it has the correct size rough-in to match the space.
What’s the difference between a 10-inch rough-in a 12-inch rough-in toilet?
The difference between a 10-inch rough-in and a 12-inch rough-in toilet is the distance between the mounting holes on the base of the toilet and the wall in the back of the toilet, measured from the center of the bolts.
A 10-inch rough-in toilet is measured 10 inches from center to center between the mounting bolts and a 12-inch rough-in toilet is measured 12 inches from center to center. Generally, a 10-inch rough-in toilet will fit in the smaller spaces in a home, such as half bathrooms and powder rooms, while a 12-inch rough-in toilet is ideal for full bathrooms with a standard floor plan.
If a toilet is installed with the wrong rough-in, it will not be securely bolted to the floor, or the tank may not fit properly on the bowl, causing a potential leak. Therefore, it is important to measure the distance from the wall to the center of the mounting bolts before installing a toilet.
Can you change a toilet rough-in size?
Yes, you can change a toilet rough-in size. To do this, you will need to purchase a new toilet that has the desired rough-in size. Depending on the type of toilet, you may need to also purchase a new toilet anchor flange, wax seal, and water supply line.
Before purchasing the new equipment, you should double check the space in the bathroom and measure the distance from the wall to make sure you get the correct size. Additionally, once you have the new equipment, you will need to follow the instructions for installation, which include marking the distance for the hole, cutting or drilling for the hole, and connecting the water supply line.
You may need a plumber to help with the installation, or if you’re confident with basic DIY projects, you can likely follow a guide and do it yourself.
How do I know if I need a 10-inch or 12-inch rough-in toilet?
When deciding whether you need a 10-inch or 12-inch rough-in toilet, the rough-in measurement is the distance from the wall behind the toilet to the center of the waste outlet (the part of the toilet where the drainpipe connects).
The measurements are typically 10-inches or 12-inches in North America, and most standard toilets require either one of these two sizes. To determine which rough-in measurement your toilet needs, measure the distance from the wall to the drainpipe.
To determine if you need a 10-inch or 12-inch toilet, round to the nearest inch. If it measures 9-10 inches, then you will need a 10-inch toilet and if it measures 11-13 inches, then you will need a 12-inch toilet.
It is important to get the correct measurement so that your toilet will fit and function properly.
Does toilet rough-in size matter?
Yes, toilet rough-in size does matter when it comes to installing a new toilet. Rough-in size is the distance from the wall to the center of the waste outlet on the toilet. The standard distance for the toilet rough-in is 12 inches, however other sizes ranging from 10 to 14 inches can be used depending on the type of toilet you install.
It is important to measure the rough-in size of your existing toilet before you purchase a new one in order to avoid selecting the wrong size. If you select the wrong size or have incorrect rough-in size, you will have difficulty fitting the new toilet into the existing plumbing system.
Depending on the size, it can also affect where the flange will be placed. In other words, if you know the exact size of your rough-in, you can avoid costly plumbing repairs and make sure your toilet is properly installed.
Are most toilets 12 rough-in?
The rough-in of most toilets is 12 inches. The rough-in describes the distance from the wall to the bolts that secure the toilet to the floor. For example, a 12-inch rough-in toilet will have the toilet bolts 12 inches from the wall behind the toilet.
However, there are also 10-inch and 14-inch rough-in toilets available. Whether you get a 10 inch, 12 inch, or 14 inch, it is important to make sure that the rough-in matches the distance from the wall behind the toilet.
Measure carefully before purchasing the toilet to ensure that you get the right rough-in for the space.
How many inches should a toilet be off the wall?
The distance a toilet should be from a wall depends on the type of toilet and the type of installation being used. Generally speaking, a standard toilet should be about 12 inches from the wall in a standard installation, and about 6-8 inches from the wall in a wall-mounted installation.
However, these measurements may vary based on the size and type of toilet, as well as any other structural elements or fixtures present in the area, so it is important to check with the manufacturer or installation specialist for exact measurements.
What does 12 inch rough-in mean when installing a toilet?
12 inch rough-in means the measurement from the wall to the center of the closet bolts. It is important to know the rough-in size when installing a toilet because it determines the distance the toilet needs to be placed from the wall.
If the rough-in size is 12 inches, it means that the toilet needs to be positioned at least 12 inches away from the wall when installing it. In addition, a 12 inch rough-in means that the closet flange and the connecting drain pipe should also have a 12 inch distance from the wall.
To ensure that the toilet is properly and safely installed, it is important to ensure that the rough-in measurement is the same as the size and type of flange used.
How do I know what size toilet I need?
To determine the size of toilet you need, you will need to measure your existing toilet’s rough-in first. This is the distance between the wall behind the toilet and the center of the waste pipe. The standard rough-in is 12”, and the larger sizes are 14” or 10”.
The most common toilet seat sizes in the US are 14. 5” or 15”. It’s important to have the right size to ensure that the toilet fits properly. Once you have determined the rough-in size, you can then decide what size toilet you need.
It’s also important to consider the location of the toilet in the bathroom and whether it needs to fit in a tight area. If so, a smaller size toilet may be better for you. In addition, consider the size of the bowl and tank when selecting a toilet.
A shallow tank and bowl will not provide optimal flushing power, and a larger tank and bowl will consume more space in your bathroom.
Finally, when purchasing your toilet, be sure to look for models that are WaterSense certified. Toilets that are WaterSense certified use 20 percent less water than the standard models, saving both water and money.
What measurements do I need to replace a toilet?
To effectively replace a toilet, you will need the following measurements:
1. Rough In Measurement – This is the most critical measurement, as it determines the distance from your home’s finished wall to the toilet’s bolt cap. This should be measured from the subfloor to the center of the closet bolt.
Most toilets have a standard 12-inch rough-in, although some may require a 10- or 14-inch rough-in instead.
2. Height of Toilet Bowl – This is typically measured from the floor to the top of the toilet bowl. Standard bowl heights range from 14 to 16.5 inches. Most standard toilets are 15 inches.
3. Seat Height – This is the distance from the floor to the top of the seat. The ADA (Americans with Disabilities Act) requires that toilets in public restrooms have a seat height that is 17 to 19 inches from the floor.
Some “comfort height” toilets are available that are around 18 to 19 inches tall.
4. Width & Length of Toilet Bowl – This is measured from the center of the closet bolt to the very back of the bowl. Most toilets measure at least 16. 5 inches in length. Width can vary amongst different models, ranging from around 27 inches up to around 31 inches.
5. Flange Measurements – The flange is the pipe fitting that actually attaches the toilet to the floor. Measure the outside diameter of the flange to ensure you have the right size. Additionally, measure the depth of the flange from the top of the pipe to the finished floor.
Should toilet flange be flush with floor?
Yes, a toilet flange should be flush with the floor. If a toilet flange is not flush with the floor it can create problems such as a rocking toilet, leaky seals, and weak flushing power. In addition, it can cause water to pool around the toilet base resulting in water damage.
To ensure that the toilet flange is properly attached and flush with the floor, it should be securely bolted down with tapcon screws, along with making sure that the wax ring and the sealant is applied correctly.
Furthermore, it is important to make sure that the floor is level and that the toilet flange is centered in its position for a secure installation.
How do you fix a toilet that is too far from the wall?
Fixing a toilet that is too far from the wall is a fairly simple task that can be easily accomplished with the right tools and a bit of knowledge. If the toilet is too far from the wall, the first thing you’ll have to do is remove the toilet tank and separate it from the bowl.
Remove the closet bolts that hold the toilet to the floor. If the toilet is a standard distance from the wall, you can find new bolts that will fit. If not, you may need to shim the area between the toilet and the wall with pieces of wood or other materials.
After that, cut the toilet bolts 1/4 inches shorter from the top and wrap them in plumbers tape. Re-install the tank and bowl, fastening the toilet onto the floor with the new bolts and shims. Place a level across the toilet and adjust the shims until the toilet sits level.
When you’re done, re-attach the water supply line, turn on the water supply and flush the toilet to check for leaks. If everything is in order, you can then re-caulk around the base of the toilet and you should have a properly installed toilet.
Can I stack 2 wax rings on toilet?
No, you should not stack two wax rings on a toilet. Wax rings are designed to provide a water-tight seal between the bottom of the toilet and the top of the waste line. When two wax rings are stacked, this seal is compromised and can lead to water leakage and showering onto the floor.
As a result, it is important to follow the instructions that come with the wax ring and only use one wax ring at a time. If your toilet flange is not installed at the proper height, consider using an extra thick wax ring, which can help make up for the difference in height.
Should you caulk around toilet flange?
Yes, it is important to caulk around the toilet flange. The wax ring around the flange creates a seal between the toilet and the drainpipe, but caulking provides additional protection from water and can help your toilet stay in place for longer.
Caulking around the flange can help protect your subflooring from water damage. You should use 100% silicone caulk that is rated for bathrooms and kitchens and is safe to use in contact with water. Make sure the surface is clean and dry before applying the caulk.
Once the caulk is dry and cured, it helps keep the toilet secured to the flange and keeps the area waterproof. It is important to use the right caulk and properly install it to ensure a tight waterproof seal and a long-lasting installation.
How far can a toilet flange stick up above the floor?
The maximum allowed height of a toilet flange above the floor is 1/4 of an inch. This maximum height was created to ensure that the surface of the floor is not too high, allowing the toilet to be solidly connected to the waste pipe and securely sealed with a wax ring.
If the toilet flange sticks up more than the allowed 1/4 of an inch above the floor it may not properly connect to the waste pipe, creating leaks and damage. It is recommended to use shims if a toilet flange needs to be raised to fit the surface of the floor, as this will provide a strong, secure connection and ensure that it is properly sealed with a wax ring.