Skip to Content

Can you put a tub insert over an existing tub?

Yes, you can put a tub insert over an existing tub. A tub insert, also known as a tub liner, is a thin, acrylic piece of material that sits over the top of your existing tub, creating a fully sealed and waterproof surface.

This provides an efficient and cost-effective way to update the look and condition of your tub without having to do a complete tear-out and replacement. The tub insert adheres to the existing tub surface using a waterproof adhesive.

Because of this, the surface must be completely clean and free of any dirt or build-up for the liner to properly adhere. You’ll also want to make sure the existing tub is in good condition and that there are no cracks, chips, or other damage before you start installing the new liner.

Installing a tub insert requires some basic DIY skills, such as being comfortable working with plastic, being able to measure and cut the liner to fit your existing tub, and being able to safely operate tools such as a drill and jigsaw.

If you feel confident in your ability to handle these tasks, the installation process shouldn’t take more than a weekend.

How can I cover my existing bathtub?

Covering an existing bathtub can be done by either refinishing or relining it. Refinishing is a process that involves prepping the existing surface, blocking off the area, cleaning, priming, and the application of multiple coats of special epoxy-based paint.

Relining involves measuring the existing tub, cutting and fitting a new acrylic liner, sealing it and then finishing off with adhesive caulking. Depending on the condition of the existing tub, either or both of these processes could be completed by a professional or DIY homeowner.

If a homeowner chooses to do the work, it is important to adhere to manufacturer instructions as well as to wear protective gear and follow all safety protocols. Of course, if there is any doubt as to the viability of either process, it is best to consult with a professional to discuss the best option.

How much does it cost to put a tub over a tub?

The cost to put a tub over a tub will depend on several factors such as the size of the existing tub, the quality of the new tub, and the type of installation you choose. For a basic installation of an acrylic or fiberglass tub surround over an existing tub, you can expect to pay anywhere from $400 to $2,500 for the materials and labor.

To install a basic tile surround over an existing tub, you should plan to pay between $1,000 and $3,000. If you choose a more complex installation such as a steam shower or a whirlpool tub you should plan to pay between $2,500 and $5,000.

Lastly, if you choose a high-end, custom installation you should expect to pay upwards of $10,000.

Is it cheaper to resurface or replace a bathtub?

Whether it is cheaper to resurface or replace a bathtub will depend on a few factors, including the condition of the existing bathtub, the type of bathtub, and the surface-finishing material used for the project.

If the existing bathtub is in good condition with minimal scratches and other repairs needed, and the surface-finishing material chosen for the resurfacing project is relatively inexpensive, it may be cheaper to simply resurface the bathtub rather than replace it.

On the other hand, if the existing bathtub is in poor condition and requires extensive repairs, it may be more cost-effective to simply replace it with a new one. Additionally, the type of bathtub can also affect the total cost.

If the existing bathtub is composed of porcelain or fiberglass, it can often be less expensive to repair or resurface it, as opposed to replacing a cast iron or clawfoot tub that may require a higher investment to replace.

Ultimately, the decision between resurfacing or replacing a bathtub will depend on a variety of factors, and should be researched thoroughly before taking any action.

How do you update a bathtub without replacing it?

Updating a bathtub without replacing it requires some creativity. Depending on the age of your bathtub and its condition, you may be able to give it a facelift with a few simple fixes.

One option is to refinish the bathtub. A professional refinishing job usually entails sanding, priming, and painting the tub with a new coat of epoxy-based paint and a protective sealant. This can dramatically improve the look of the bathtub without the need for replacement.

Another option is to use a tub liner kits. These consist of vinyl panels or a custom-molded acrylic sheet that is cut to fit into the bathtub and covers the existing tub surface. The liners are available in a variety of colors and textures to give the tub a fresh new look.

Tile is also a great way to update the look of the bathtub. Of course, the older the bathtub, the more challenging it may be, as preparation must be done to ensure the tiles stay in place. Additionally, you may need to apply a waterproofing sealant prior to tiling and grouting around the edges to keep water from leaking.

Finally, you can also fix small cracked or chipped areas in the bathtub with a bathtub repair kit. These kits come with a puttylike substance that can be used to patch and seal the damaged area.

No matter what kind of update you decide to perform, it is always important to use proper safety precautions while working on the bathtub. If you are unsure of how to properly update your tub, it’s wise to consult a professional who can help guide you through the process.

How long does resurfacing a bathtub last?

Resurfacing a bathtub typically lasts 10 to 15 years, depending on how much wear and tear it is exposed to. Factors that can decrease the life of a resurfaced bathtub include heavy use, not using non-abrasive cleaners, and not using soft mats and bath mats.

Using non-abrasive cleaners and soft mats help to protect the resurfacing from any major wear and tear that can decrease its longevity. Re-sealing the bathtub annually can also help maintain the longevity of the resurfacing.

Regular maintenance and ensuring that it is taken care of should help ensure that your resurfaced bathtub will last around 10 to 15 years.

Will Medicare pay for a tub conversion?

Unfortunately, Medicare does not typically cover tub conversions. Medicare does not cover anything that it classifies as home modifications or home safety. This includes tub conversions or anything else of this nature.

However, there are some things that may be covered under certain circumstances. If a doctor has recommended the tub conversion to improve the safety of a patient, Medicare may cover part of the cost.

Additionally, specific home care programs may cover certain medically necessary home modifications. It is important to note that individual coverage policies may vary. It is recommended to contact your local Medicare office or provider to determine which services are covered under your specific plan.

Can you put a new tub surround over an old one?

Yes, you can put a new tub surround over an old one. It is important to make sure that the old surround is in good condition before installing the new one and that you have the right supplies. First, check the wall and make sure it is in good condition and that all of the nails or screws are secure.

If the wall is not in good condition, it is best to replace it first. Once you have ensured the wall is in good condition, you can start the installation process. Measure the tub to make sure the new surround will fit.

Next, get the appropriate supplies such as trim, caulking, sealer, shower kit, and fasteners. Once you have all the necessary supplies, carefully remove the old surround and clean the walls and area.

Finally, install the new tub surround according to the manufacturer’s instructions. Be sure to caulk, seal and finish off the edges. With the right supplies and steps, it is possible to put a new tub surround over an old one.

Does removing bathtub decrease value?

Removing a bathtub from a home can sometimes decrease the value of the property, depending on the location and the potential buyers. In some areas, a bathtub is an expected part of any bathroom and its absence may make a home less attractive.

On the other hand, in certain locations such as urban areas or vacation spots where space is limited, removing a bathtub may even increase the value of the home.

The ability to remove a bathtub could also help a home stand out from the competition. For example, if a bathroom is too small for a tub, it may be more appealing to buyers if the space can be used for a shower instead.

Ultimately, whether removing a bathtub will decrease or increase the value of a home depends on the individual property. Homeowners should speak with a real estate professional in their area who can provide advice tailored to their unique situation.

What size is a tub insert?

Tub inserts are available in a wide range of sizes to fit most standard tubs. Typical sizes range from about 16″ to 24″ in height and 30″ to 36″ in width. However, if you have a non-standard size tub, there are companies that make custom-sized tub inserts to fit almost any size.

It is important to measure your tub to make sure you purchase the correct size tub insert. While it may be possible to return a tub insert that does not fit, it may be easier and less expensive to get the correct size in the first place.

How big is a standard tub insert?

A standard tub insert is usually 25-27 inches wide and 14-16 inches tall. This size makes the insert comfortable and safe for a typical adult to use. The typical insert will also have a depth of 12-14 inches, allowing for a comfortable and secure fit.

The size of the tub insert may vary depending on the location and the manufacturer, but the above measurements are generally accepted to be the standard size for a tub insert.

How do you measure for a tub insert?

In order to measure properly for a tub insert, there are a few things to consider. First, you will measure for the width of the tub insert. Measure the interior tub wall from one side to the other at its widest point.

Measure in three different places (top, middle, and bottom) and use the smallest measurements. Next, measure the length of the tub insert. Measure the longest tub wall from the back to the front lip.

Again, measure in three separate points as before. Lastly, measure the height of the insert by measuring the distance from the top of the tub wall to the floor. It is important to measure from the highest edge of the tub wall to the floor to ensure sufficient coverage when the tub insert is installed.

After taking all the necessary measurements, you should have an accurate representation of the size required for a tub insert.

What is the standard size of a tub surround?

Tub surrounds can come in a variety of standard sizes. Small bathrooms typically use styles such as alcove tub surrounds, corner tub surrounds, and three-wall tub surrounds. Each of these styles come in standard sizes that should accommodate the majority of tubs.

Alcove tub surrounds are the most common style for bathrooms with a standard 5 foot bath tub. These surrounds typically come in standard sizes of 30 or 32 inches in height, which will usually fit a 3-sided alcove space of 60 or 62 inches.

Corner tub surrounds come in standard sizes as well. These styles of surrounds generally have a 6 foot circumference to fit a standard 5 foot bath tub and are available in sizes ranging from 30 to 42 inches in height.

Three-wall tub surrounds are great for larger tubs and can fit either a 5 or 6 foot tub. These surrounds come in standard sizes of 36 to 48 inches in height.

When selecting a tub surround, it is important to ensure that the size is compatible with the size of your tub. Although there are standard sizes, it is still important to review the measurements of your space and compare them to the dimensions of the tub surround before making a purchase.

Does a tub surround go over drywall?

Yes, a tub surround can go over drywall. This is a fairly simple process that doesn’t require any major skills or tools to complete. Before you begin, make sure you have all the materials you need, such as the adhesive, the tub surround, and the silicone caulking.

Once all the materials are gathered, it’s time to start the installation process.

First, clean the wall in the area where the tub surround will be installed. Remove all dirt, dust, and grime, and then make sure the wall is completely dry before you begin. Once the wall is clean, you’ll want to make sure it’s properly sealed.

You can use primer and paint to seal the wall, or you may use a specialized sealant that is specifically designed for tub surrounds.

Once the wall is sealed, you’ll need to measure and mark where the surround will be placed on the wall. Once marked, you can use the adhesive to attach the surround to the wall. Be sure to apply the adhesive evenly and to all the areas.

Finally, use a pair of stainless steel caulking guns to attach the surround to the wall. Be sure to use a very thin layer of silicone caulking to ensure a complete seal between the surround and the wall.

Once the caulking is dry, your tub surround is ready to be used.

How much tile is needed for a standard tub surround?

The amount of tile needed for a standard tub surround depends on the size of the tub, the size of the tile, and the type of installation being done. Generally, you will need between 8 and 10 square feet of tile for a standard tub surround.

However, if you’re installing larger tiles, you may need up to 12 square feet. Before starting your project, make sure to calculate the square footage of the tile you will need based on your measurements and the size of your tiles.

This can help ensure that you have enough tile available to complete your project without running out. Additionally, take into account the type of installation you will be doing, as this can influence the amount of tile you need.

For example, if you plan on doing a mosaic tile installation or a herringbone pattern, you may need more tiles than if you were planning to install tiles in a basic linear pattern.