Skip to Content

Can you put recessed light over bathtub?

Yes, you can install recessed lights over a bathtub, as long as you take the necessary precautions to ensure the safety of the space. Before installing, you will want to make sure the light fixture is marked for wet locations and that it is rated for direct contact with water.

Additionally, install the lights in a place where the risk of water getting onto the fixtures is minimized. When wiring the fixtures, use watertight connections that are intended for use in wet locations.

If the lights are located in a ceiling near a bathtub, be sure to install them a safe distance away from the tub to reduce the risk of splashing. Be sure to also consult with a qualified electrician to make sure that any installation meets all applicable codes and regulations in your area.

Where should you not put recessed lights?

Recessed lights should never be placed directly over the top of someone seated at a desk, kitchen table, or other workspace. They should also not be placed in bathrooms or laundry rooms, as humidity can damage the fixture.

In addition, recessed lights should not be placed directly over a staircase, as the light can be too harsh and make it difficult to see the steps. Finally, they should not be placed too close to corners, as this can make shadows look overly exaggerated.

Where should recessed lighting be placed in a bathroom?

In bathrooms, recessed lighting should be placed at least seven feet above the floor and three feet away from the walls. When lighting a bathroom mirror, the recessed lighting should be placed at least four feet away from the mirror and two feet on either side of the mirror.

One of the most important details to consider when placing recessed lighting in a bathroom is how close it will be to the water fixtures. Generally, recessed lighting should be positioned at least six feet above the top of the tub and at least four feet away from the shower and other water fixtures.

The ceiling of the bathroom should also be kept in mind when selecting a location for recessed lighting as the heat generated by lighting fixtures can cause staining and discoloration if they are too close to the surface of the ceiling.

To further enhance the lighting of a bathroom, it is recommended to pair recessed lighting with ambient or task lighting such as wall sconces and vanity lighting.

Can recessed lights be installed anywhere?

Generally speaking, yes, recessed lights can be installed anywhere. However, it is important to take into consideration a few factors when planning a project involving recessed lights. First, always consult local building codes to ensure that the installation meets safety standards and requirements.

Additionally, you should consider the ceiling height of the space to ensure the lights are not too close to the ceiling, as this can cause the lights to be too bright, create hot spots and potential fire risks.

Additionally, consider the existing wiring and determine if it needs to be upgraded, as recessed lights may require a new dedicated circuit. Finally, be sure to use a licensed electrician and approved parts when installing recessed lights.

Following these guidelines can help ensure that your project is completed safely and to your satisfaction.

How many recessed lights do I need in a bathroom?

The number of recessed lights you need in a bathroom will depend on the size of the bathroom, the type of lights you choose, and the kind of ambience you want to create. As a general rule of thumb, you should aim for at least two recessed lighting fixtures for maximum brightness, and two fixtures every four to five feet apart for a standard 8-foot ceiling.

You may also want to consider adding additional lighting to the ceiling, such as pendant lights, track lights, accent lights, and wall sconces. Keep in mind that recessed lights provide the most amount of light but use the least amount of space, making them ideal for bathrooms with limited space.

Additionally, you should aim for a light color temperature of between 3000k and 3500k to create a more natural and warm atmosphere. Lastly, make sure that whichever type of lighting you choose, it’s water resistant to help protect your bulbs from the steam in a bathroom.

Where do you put LED lights in a bathroom?

When it comes to adding LED lights to a bathroom, there are several places you can consider. The most common place to add LED lights is around the vanity or mirror on either side. To really make a statement, you could add a light strip along the top and bottom of the mirror for a sleek and modern look.

You could also consider adding LED light strips along the ceiling, either in a square or around the edge of the room. LED lighting can also be tucked in underneath cabinets or shelves for subtle task lighting.

Sconces on either side of the mirror can provide accent lighting, as well as LED lighting around the shower enclosure for a nice glow at night. One of the nicest features of LED lighting is that it can be dimmed to achieve whatever mood you are going for in your bathroom.

No matter where you choose to place LED lights in your bathroom, they are sure to add an elegant and stylish touch to the space.

Should lights over vanity point up or down?

This really depends on the type of lights, your overall aesthetic, and where you want the light to be focused. If the lights over your vanity are recessed lights, directional fixtures, or track lighting, then you can direct the light in the desired direction.

If the lights are reflective, such as a pendant light, having the light point down would be the most complementary. Downlighting will create a softer look and be more flattering for a bathroom space, while uplighting will draw the eye to the fixtures and be a brighter statement.

If you are looking for general lighting and illumination, then pointing the lights up may be the better option as it will light up the whole room and prevent shadows. It really just depends on your preference.

What’s the lighting for a small bathroom?

The lighting for a small bathroom depends on the size and layout of the bathroom, as well as the overall aesthetic you are trying to achieve. Generally speaking, for a small bathroom, it is best to have multiple points of light that offer various levels of brightness and ambiance.

Task lighting is important for a small bathroom for shaving or grooming, so you may want to invest in a bar light, wall sconces, or even recessed lighting above the mirror. This will provide even, bright lighting to focus tasks while reducing shadows.

Adjacent to the vanity, you should also include an overhead light or a pendant light that illuminates the entire space. For an inviting atmosphere, choose a pendant light in a warm hue to help the bathroom feel more inviting.

For the shower area, you have the option of ceiling or wall mounted lighting. Ceiling lighting is often the best option for small bathrooms as it can help spread the light around the entire space. Wall sconces may also be considered for a more modern aesthetic and to provide additional brightness.

Overall, the lighting for a small bathroom must be carefully considered to achieve the desired style and functionality. Task lighting and accent lighting are essential in smaller bathrooms, as is the selection of light fixtures.

Selecting the right type of lighting can make a big impact on the space and will help your small bathroom look and feel brighter and more inviting.

Can you have too many recessed lights?

Yes, it is possible to have too many recessed lights as this could create an aggressive glare and/or a lighting overload. This is because recessed lighting, when used too often or placed too close together, can produce an excess of brightness and an uncomfortable amount of glare.

Additionally, it can affect the balance of the room’s interior, making it unnaturally bright and sterile. It is important to determine the right amount of recessed lights and the correct placement that will evenly spread out the light.

When using recessed lighting, be sure to not place them too close together and to use wall sconces, platforms, and other lighting fixtures as a balance. As a general rule of thumb, there should be a balance of task and ambient lighting, which are recessed lights, and accent and ornamental lighting, which are pendant lights and chandeliers.

How much does it cost to install 8 recessed lights?

The cost of installing 8 recessed lights depends on a variety of factors, such as the type of lights you choose, the location of the lights, and the materials and labor needed for the job. Generally speaking, it can cost between $600 and $2,400 to install 8 recessed lights.

The type of lights you choose will affect the overall cost. High-efficiency LEDs are the most common and cost-effective option, ranging from $120 to $300 per light. Some fancier fixtures could cost more, especially if you select an LED with certain special features.

The location of the lights can also affect the installation cost. If the recessed lights are in an easily accessible space, it will cost less because there will be less labor required to get the job done.

On the other hand, if your lights are in a high ceiling or a hard-to-reach area, the cost of installation can go up because of ladders and other tools necessary to access the spot.

Finally, the materials and labor costs must be factored in. This includes electricity, drywall, insulation, wires, and any necessary tools, such as ladders or scaffolds. Labor costs can range from $70 to $100 per hours.

Depending on the complexity and scope of the job, the total cost of installation could be as low as $600 or as high as $2,400.

Are LED lights OK for bathrooms?

Yes, LED lights are an excellent choice for bathrooms. LED bulbs produce a bright, crisp light that makes it easy to get ready in the morning. Additionally, LED bulbs are extremely energy efficient and can last up to 40,000 hours, so you won’t have to worry about replacing them often.

LED lights also generate very little heat, so you don’t need to worry about steam or water droplets causing them to short circuit. Finally, LED bulbs come in various styles, lumens, and shades, so you can easily find one that matches your bathroom’s décor.

How do I know if my LED lights are waterproof?

Firstly, you should look for any markings on your LED lights packaging or instructions, as this will typically indicate the level of weatherproofing of the product. Many LED lights come with an IP rating, which indicates how waterproof the product is; a rating of IP65 or higher usually indicates the lights are waterproof.

Secondly, it is important to check the material of the lights. It should be durable and diamond cut so that it can resist water and other weather elements. Weatherproof LED lights will also be covered with a protective finish such as silicone or polyurethane.

Finally, it is important to check if the lights have seals. This can be done by looking for silicone rings or gaskets that are used to create a waterproof seal around the housing of the LED lights. If the LED lights do not have seals, they are not likely to be waterproof.

In conclusion, to determine if your LED lights are waterproof, make sure to check the packaging and instructions for any markings, check the material for durability and water resistance, and check for any seals that may indicate waterproofing.

Are LED lights water resistant?

Yes, LED lights are water resistant. LEDs are made from sealed plastic housing, which makes them highly resistant to water and moisture. LED lights are typically rated as IP65 or higher, meaning they can withstand rain and other forms of water exposure without becoming damaged.

This makes them a great choice for outdoor lighting, where safety is a major concern. Additionally, LED lights are not only resistant to water, but also to heat and cold, meaning they last longer than incandescent lighting with minimal maintenance.

Because of their durability and long life, LED lights are an excellent option for both indoor and outdoor lighting applications.

Are recessed lights out of style?

Recessed lights have been a popular option for homes for many years and remain a popular choice. They provide a very attractive, modern look. However, the style and look of recessed lights has changed over the years and the trend may be shifting away from them in some areas.

Recessed lights can still be a good option for many homes, depending on the style of the home and the look you are trying to achieve. However, there are also several other lighting options that may give your home a more modern look and there are even some more minimal lighting options such as LED strips that can provide a more modern and contemporary look.

Ultimately, when it comes to recessed lights, it is up to the discretion of the homeowner and their personal taste in home decor and style.

Do recessed lights increase home value?

Yes, recessed lights can potentially increase home value. They provide a modern and updated look to a home, and can be used to light common living areas like kitchens, dining rooms, and living rooms.

Recessed lights can also be used to highlight darker areas or spaces in your home. Having a good lighting plan that accents certain areas, while keeping a consistent look throughout will be beneficial to potential buyers.

Recessed lighting helps set the tone and can make buyers feel they’re walking in to a warm and inviting place. Additionally, installing recessed lights can be an inexpensive way to update your home and is also easier to maintain than other lighting fixtures.

Ultimately, installing recessed lights can be an attractive feature when done right and could increase the value of your home when you decide to sell.