Skip to Content

Can you replace a 10-inch rough in toilet with a 12-inch rough in toilet?

Yes, it is possible to replace a 10-inch rough in toilet with a 12-inch rough in toilet. In order to replace the 10-inch rough in toilet with a 12-inch rough in toilet, the wall will need to be cut out and a 12-inch flange patch will need to be installed.

This would then allow a 12-inch rough in toilet to fit in the wall. Additionally, all of the appropriate plumbing work would need to be done to make sure the toilet is properly connected to the water lines, sewage lines and drain.

Additionally, all necessary fixtures and vents would need to be connected to the toilet and all necessary seals and gaskets would need to be used. It is important to note that there may be restrictions on the type of toilets that can be installed with a 12-inch rough in due to the greater flange to wall distance.

Therefore, it is important to make sure that the toilet being installed meets all applicable building codes.

Can you change a toilet rough-in size?

Yes, you can change a toilet rough-in size. This process is best done prior to the installation of the toilet and flooring, as it involves moving, resetting, and possibly replacing some of the plumbing.

If the toilet needs to be moved after the flooring has been installed, it requires a more complex process of cutting and reconfiguring the flooring before continuing with the resetting of the toilet.

The first step in changing the toilet rough-in size is locating and turning off the water supply valve, typically located on the wall close to the toilet. Then the existing toilet must be removed and the flange should be unbolted and replaced.

The next step is to mark the desired rough-in size and then use a reciprocating saw to cut the hole for the new flange. If necessary, the old flange can be patched with drywall or another building material.

Finally, the new flange should be secured to the floor and the toilet should be reinstalled.

When resetting the toilet and plumbing, it’s important to ensure that the flange and the wax ring are properly installed and sealed securely against the floor. If the wax ring and flange are not installed correctly, it can lead to water leaks and costly damage.

Additionally, all water supply lines must also be reattached properly in order for the toilet to properly flush.

What is the difference between a 10 and 12 toilet?

The primary difference between a 10 inch and a 12 inch toilet is the rough in size, or the distance of the bolts that are used to secure the toilet to the floor. The 10 inch toilet has a rough in size of 10 inches, meaning the bolts are 10 inches apart, while the 12 inch toilet has a rough in size of 12 inches, meaning the bolts are 12 inches apart.

Aside from the difference in rough in size, they are essentially the same toilet. The flushing system, bowl shape and height, seat size and other features of the toilet should all be the same. The 10 inch and 12 inch models are interchangeable, it really just comes down to what will fit in the space allotted.

When it comes to the installation process, you will need to make sure there is enough room for the toilet, especially if the floor is uneven.

How do you know if you need a 10-inch or 12-inch toilet?

The size of the toilet you need depends on how much space you have in the bathroom and what your personal preference is. Generally, a 10-inch toilet is considered the standard size and is suitable for most bathrooms.

However, if you have a larger bathroom or a bathroom shared by multiple people, it is recommended to get a 12-inch toilet for better comfort and more legroom. To determine the right size for you, measure the area around the toilet.

You want at least 15-20 inches of clearance to the walls and the back of toilet should be two to three inches from the side wall. In addition to the size, you also want to consider the shape and style of the toilet that you want that best fits the look and feel of your bathroom.

What does 12-inch rough-in mean when installing a toilet?

A 12-inch rough-in means the distance between the wall behind the toilet and the center of the closest hold-down bolt. This measurement is critical when installing the toilet, as the height and width of the toilet are dependent upon it.

Installing a toilet with a 12-inch rough-in is standard in most settings where a residential toilet is to be used. With a 12-inch rough-in, the toilet is usually positioned between 16 and 18 inches from the wall behind it.

When measuring for a 12-inch rough-in toilet, it is important to measure from the wall to the center of the hold-down bolt rather than the outside edge of the bolt hole. Measuring from the edge of the hole will give an incorrect measurement, as the hole itself takes up some of the space between the wall and the center of the hole.

Additionally, when measuring from the center of the bolt hole, it is important to measure to the nearest quarter-inch for accuracy.

It is important to make sure you are installing a 12-inch rough-in toilet when replacing an existing toilet, as different rough-in sizes require different toilet bowls and tanks. Installing a toilet with the wrong rough-in size can lead to costly mistakes and a less than satisfactory result.

What height of toilet is for seniors?

The height of a toilet for seniors should typically be set at 17 to 19 inches from the floor to the top of the toilet seat. This range is about two to four inches higher than a standard-height toilet, which is typically 15 inches from floor to seat.

Some seniors may find higher-than-standard and comfort-height toilets (which measure between 17 and 19 inches) to be more comfortable.

Are all toilets 12 inches from wall?

No, not all toilets are 12 inches from the wall. The exact distance will usually depend on the type of toilet you have, the size, and the manufacturer. Some toilets may be closer to the wall, while others may have additional features that need more space between them and the wall.

If you’re installing a toilet in a bathroom, it’s important to measure the space between the wall and your chosen toilet to ensure it will fit properly. If you’re replacing an existing toilet, you’ll want to make sure you purchase a toilet that has the same measurements as your current one.

Additionally, you may want to double-check the manufacturer specifications to ensure you have accurate measurements.

How do I know what size toilet I need?

One of the easiest ways to know what size toilet you need is to measure the distance from the wall behind your toilet to the center of the existing toilet’s bolts that hold it down to the floor. Once you know this measurement, you can then measure the distance from the back wall to the center of the bolt holes of the new toilet you’ll be buying.

The bolt hole measurement should be the same or slightly larger than the one of your existing toilet to ensure a proper fit. However, it’s important to also take into account the overall size of the new toilet.

Fortunately, you have a variety of sizes ranging from elongated bowls which are typically more comfortable to sit on, to round bowls which are better for small bathrooms. Ultimately, be sure to reference the measurements and features of any toilet before purchasing to ensure it will fit in your space.

What toilet measurements do I need?

In order to determine the proper measurements for your toilet, you need to take a few different measurements. First, you need to measure the completed floor area of the bathroom where the toilet will be installed.

This will help to determine the total area you have to work with and the space requirements of your toilet. Additionally, you will need to measure the distance of the toilet’s center line from any adjacent walls and the distance from the wall to the center of the toilet flange or the waste line.

Your toilet also needs to fit within the confines of the bathroom, so it’s important to double-check your measurements that way as well. Generally, toilets need a clearance of 17 to 19 inches from the center of the toilet seat to the wall behind it.

If you’re working with a limited space and need to install an ADA-compliant toilet, the distance requirement for the center of the toilet seat and the wall increases to 21-25 inches. You’ll also need to take into account the type of toilet base you’re installing.

Toilet bases generally come in two different shapes, elongated or round. Elongated bases are generally up to 2 inches longer than round bases, so it may not fit the available space. Finally, if you’re looking to replace an existing toilet, you may need to replace the plumbing fixture, too.

If so, take careful measurements of the location and size of the existing trap and waste fittings.

What measurements do I need to replace a toilet?

In order to replace a toilet, you will need a few different measurements. These measurements are the distance from the back wall to the bolts that secure the toilet to the floor, the distance from the floor to the center of the toilet outlet, and the width and the length of the area where the new toilet will sit.

You should also measure the size of the flange that connects the toilet to the plumbing so that you can purchase the correct toilet fitting. Additionally, it’s a good idea to measure the size of the water supply line coming out of the wall, as this will determine the size of the new shutoff valve (if necessary).

Lastly, make sure that the new toilet flange you purchase can fit with your existing flange. There are two types of flanges available–raised and flat. You should measure your existing flange to make sure you purchase the correct type that can fit your plumbing correctly.

Is my toilet 10 or 12-inch?

Unfortunately, it can be hard to tell just by looking at your toilet if it is a 10 or 12-inch model. The easiest way to tell is by checking the size of the outlet pipe. To do this, turn off the water supply and disconnect the toilet from the wall.

Once the toilet is disconnected, you can measure the size of the pipe coming out of the tank. The size of the pipe indicates the size of the toilet, with one inch equaling 10 inches. A 12-inch toilet has a 2-inch outlet pipe, and a 10-inch toilet has a 1-inch outlet pipe.

Additionally, if you remove the toilet tank, there should be a marking indicating the size printed on the inside of the tank.

How do you tell if a toilet is a 10 inch rough?

The first step in determining if a toilet is a 10 inch rough-in is to measure the distance from the wall behind the toilet to the center of the mounting bolts on the floor. If the distance is 10 inches, then you know that you have a 10 inch rough-in toilet.

You should also measure the distance from the floor to the center of the toilet hole, to make sure it lines up with the 10 inch rough-in. If it is not a 10 inch rough-in toilet, the measurements will likely vary from the standard 10 inch rough-in.

If the measurements match a 10 inch rough-in, then you can confidently say that you have a 10 inch rough-in toilet.

How many inches should a toilet be off the wall?

The general answer is that a toilet should be at least 12 inches off the wall. This provides enough clearance in the back to allow for the proper installation and movement of the waste pipe and connections.

The exact distance may vary based on the particular toilet model and the shape of the back of your toilet bowl. The builder or manufacturer should provide guidelines regarding the appropriate distance based on the specific dimensions of the model.

In addition, any local building codes in your area may require that the toilet be a specific distance away from the wall, so it is always wise to confirm the exact distance before beginning your installation.

What is the size of a standard toilet?

The size of a standard toilet is typically 12” (30 cm) from the wall to the back of the bowl, 14” (35. 5 cm) to the center of the closet bend, and 28” (71 cm) from the floor to the top of the bowl. Also, the rim height is usually 16” (40 cm) and the total width is typically 20” (50 cm).

The length and width of the bowl tends to vary depending on the design, and can range from 23” to 31” (58cm-79 cm) and 12” to 15” (30 cm-38 cm), respectively.

How do you measure rough-in for toilet?

Measuring rough-in for a toilet involves first measuring the distance from the wall behind the toilet to the center of the waste pipe. This is referred to as the rough-in and will dictate which type of toilet you need for your space.

For example, if the rough-in measurement is 12-inches, you will need a toilet with a 12-inch rough-in. To get the most accurate measurement, you will want to measure from the center of the waste pipe to the wall surface, making sure to account for any drywall or wall coverings that may have been applied.

When measuring, use a tape measure and start at the center of the waste pipe and extend it out until it reaches the wall. Then make sure to take a second, more accurate measurement just to be sure. When installing a toilet, make sure to use new bolts, as old ones may not be compatible with the toilet or be secured enough to hold it in place.

Also, be sure to check that the waste pipe is centered in the toilet’s mounting holes.