Skip to Content

Can you replace a toilet with any size toilet?

No, you cannot replace a toilet with any size toilet. The size of the toilet is determined by the size of the area of the bathroom where the toilet is to be installed. If the area for the toilet is small, then a small size toilet is needed; if the space for the toilet is larger, then a larger size toilet will be needed.

Besides the size of the area, other factors such as the angle of assistance and height of the toilet should also be taken into consideration when replacing a toilet. Additionally, it may also be necessary to have the exact same model of toilet as the old one to ensure it fits correctly.

It is important to seek professional assistance when replacing a toilet to ensure that the size, model, and angle of assistance are correct for the space.

Does toilet size matter when replacing?

Yes, toilet size does matter when replacing as the measurement of the new toilet’s bowl height, length, width and depth must match the old toilet’s bowl measurement to be able to fit properly. Additionally, the bolt spread or flange-to-flange distance (which is the measurement between the holes in the floor where the bolts pass through) needs to be the same as well.

It is important to measure what the current dimensions are to ensure that when getting a replacement, it will fit properly in your space.

Can you buy different size toilets?

Yes, you can buy different sizes of toilets. Toilet manufacturers offer several models in a variety of sizes so there is sure to be one that fits your bathroom and the needs of your family. Toilets come in standard sizes, such as 14 to 16 inches from the wall to the center of the toilet seat, but also have various bowl sizes and heights.

Some toilets are adjustable and allow you to customize the height and size of the bowl for optimal comfort. In addition, toilets come in a variety of designs with either round or elongated bowls. Space can be a constraint when choosing a toilet and the size of the bathroom will be a factor.

It is important to measure the area you want to install the toilet in to make sure there is enough room. Many toilets come with a wax ring and floor bolts and include instructions for installation. It is best to consult a professional plumber if you are unsure how to install your new toilet.

Are all toilet bowls the same size?

No, not all toilet bowls are the same size. Toilet bowls come in a variety of sizes and shapes, depending on what type of toilet you have. A standard, round-front toilet bowl is usually about 14 -16.

5 inches long from front to back, whereas an elongated-style bowl is typically around 18-19. 5 inches in length. Additionally, some toilets have protruding “skirted” bases that reduce the amount of space needed to install the bowl, while others are “wall-hung”, only visible when seated.

As such, the size of the bowl will depend on the type of toilet you have.

Are toilet sizes universal?

No, toilet sizes are not universal. Toilet sizes can vary depending on several factors such as the manufacturer or model, the type of toilet, or even the location of the toilet. Generally, most toilets are made to fit standard-sized bathrooms, but this can vary.

Typically, the size of the bowl is in the range of 12 to 14 inches across and 17 to 19 inches from front to back. It is important to know both the shape and size of the toilet when purchasing a new one, so that it fits the space you have available.

Additionally, if you are considering aging in place or universal design, the size of the toilet can be a factor in your decision-making so that it is easily accessible for all who use it. It is always best to measure your space for the toilet to ensure you make the best purchase.

What do I need to know about replacing a toilet?

Replacing a toilet is a fairly straightforward project that is well within the capabilities of most homeowners. However, there are some important considerations one should bear in mind before starting this job.

First and foremost, you should always make sure you have the right tools on hand before starting the job. You will need a wrench to disconnect the water supply, and you may also need a new wax ring and mounting bolts, though these will come with the new toilet.

It’s helpful to also have a sponge and bucket to collect any water remaining in the toilet after it’s disconnected from the water supply.

Second, be sure to shut off the water supply to the toilet before starting the job. This will prevent any water from spraying out when you disconnect the supply, and could save you a lot of trouble.

Third, don’t forget to remove the floor bolts that are holding the old toilet in place. You’ll want to check the bolts and washers to make sure they are in good condition and can be reused, or if you need to purchase new parts.

Finally, you may want to consider putting a new wax ring on the base of the toilet before setting it in place. This will ensure a good seal between the toilet and the floor.

Following these steps should help ensure that the job of replacing your toilet goes as smoothly as possible. Don’t forget to consult any local plumbing codes or regulations.

What is a fair price for replacing a toilet?

The cost to replace a toilet depends on several factors, including the type and size of the toilet, the materials used, and the labor involved. The average cost to replace a basic toilet without any additional components hovers around $250 to $350, but it can easily jump up to $800 or more for high-end models.

If you are installing a new floor for the toilet, need additional piping, or are replacing a toilet with a more involved electrical setup (for example, a bidet or heated-water seat), then these costs could add a few hundred to the total.

Don’t forget to factor in labor costs, which may be around $150 or so, depending on your location and the complexity of the job. Finally, keep in mind that the total cost of your toilet replacement could increase if you need building permits or other fees.

What is the average cost to have a toilet installed?

The average cost to have a toilet installed depends on a variety of factors, such as the model of toilet, who is doing the installation, and any other features or materials involved. The cost to install a standard toilet ranges from around $180 to $450, with the lower end of that range covering basic, non-name-brand toilets from a big box store, and the higher end of the range covering more complex installations and higher quality fixtures.

Installation for a higher-end toilet—or a toilet with special features or customizations—can cost as much as $1,000 or more.

Labor is usually the largest portion of the total cost for installation, as it typically takes a plumber several hours to complete the job and to make sure that everything is working properly. Therefore, having an experienced, reliable, and licensed professional can be worth the cost.

In addition, the cost of the toilet itself should always be a factor. Cheaper toilets may look similar to more expensive models, but they often have less-durable fixtures and other features, such as low-flow toilets, which will require more frequent service and repair.

Is it worth it to replace old toilet?

Replacing an old toilet is definitely worth it for a number of reasons. An older toilet typically uses a lot more water than a modern one, meaning you can save money on your water bills over time. A new toilet can also be much more efficient at flushing, and modern designs can help reduce clogs and overflows.

From an aesthetic standpoint, an old toilet may be an eyesore, but a new one can add a modern touch to your bathroom. Additionally, if there is any defect with an old toilet, such as cracked porcelain or a loose or leaky seal, it should be replaced in order to prevent further damage.

All told, replacing an old toilet is a worthwhile investment that can result in a number of benefits.

How much should I pay for a good toilet?

When deciding how much to pay for a good toilet, it is important to consider quality, installation costs, and whether the toilet comes with other features such as a handwashing station. Generally speaking, good quality toilets range in price from as low as around $200 to as much as $1000 or more.

However, these prices will also depend on factors such as size, material, special features, and more. Additionally, installation costs can range from $100 to $400 or more depending on the complexity of the job and the fees charged by the installer.

Finally, it is important to take into account any additional features such as a handwashing station. These can cost anywhere from $100 to $500 for installation and $100 to $500 for the equipment itself.

All in all, it is best to get several quotes from local stores and installers to determine the overall cost.

Do you need a professional to install a toilet?

Yes, it is generally recommended to hire a professional plumbing contractor to install a toilet. The installation of a new toilet requires a lot of technical knowledge and plumbing experience; if done incorrectly, the toilet might not work properly or even cause water damage or flooding.

A professional plumber will understand the local plumbing codes, will have access to the proper tools, and will know the appropriate techniques for installing a new toilet. They will also have the skills necessary to diagnose and repair any potential problems that might come up during the installation process.

How much does Home Depot charge for installing a toilet?

The cost of getting a toilet installed at Home Depot will depend on several factors, such as the type of toilet, plumbing requirements, any labor costs associated with removal of the old toilet, and any additional installation materials that may be needed.

To get an accurate cost, you will need to contact a Home Depot store or a licensed plumbing contractor in your area to provide you with an estimate. Generally, simple installations of a standard toilet can range from $100 to $200 for basic installation.

If the plumbing involved is more complex and additional parts or materials are needed, the cost can be higher. Additionally, if additional labor is needed for removal of the existing toilet or other plumbing-related tasks, this could also increase the cost.

Are toilet bowl sizes standard?

No, toilet bowl sizes are not standard. Toilet bowl sizes may vary significantly between models and manufacturers. Generally, the two main types of toilets are round and elongated bowls. Round bowls tend to be smaller, while elongated bowls offer more bowl volume, making them better for larger people or those with mobility issues.

Toilet bowl sizes are typically measured from the back wall to the end of the bowl. Generally, round bowls are about 16 to 17 inches long, while elongated bowls measure about 18 to 19 inches. Additionally, some modern toilet bowls are available in compact sizes that measure approximately 15 inches long, making them a great option for smaller bathrooms.

When shopping for a toilet, be sure to measure the space you have available in your bathroom and select the size that is the most practical.

How do I know if my toilet is 10 inch or 12 inch?

To know if your toilet is 10 inch or 12 inch, you should measure the distance between the mounting holes in the back of the toilet. These mounting holes are typically at the base of the toilet, where the toilet is attached to the floor.

If the distance between these two mounting holes is 10-inches, then your toilet is a 10-inch toilet. Similarly, if the distance between the two mounting holes is 12-inches, then your toilet is a 12-inch toilet.

Additionally, you can measure the overall length of the toilet from front to back. For a 10-inch toilet, the overall length from the front of the bowl to the back of the toilet tank should be about 26-inches, and for a 12-inch toilet, the overall length from the front of the bowl to the back of the toilet tank should be about 28-inches.

How do I know what size my toilet is?

To determine the size of your toilet, you will want to measure from the floor to the center of the closet flange at the back of the toilet. This measurement will tell you the rough-in size of your toilet.

Generally, toilet sizes come in 12”, 10” and 8” rough-ins. The 12” size is the standard in many homes.

You can also measure the width of your toilet bowl at the widest point. Most modern toilets have a width of around 14”, but there are variations. Your toilet seat size should match the width of your bowl – they typically come in standard sizes of 14”, 15”, 16”, 17” and 18”.

Finally, it is important to measure the height of your toilet from the floor to the top of the seat. This is typically either 16. 5” or 14. 5”, although you may find a standard 17” height toilet. Comfort-height toilets tend to be around 17” and are taller than standard for those who have difficulty bending to lower toilets.