Skip to Content

Do all shower heads fit the same Australia?

No, not all shower heads will fit the same in Australia. Shower heads typically fit into categories of thread sizes, such as ½” BSP or ½” NPT (National Pipe Thread), which may not be the same in Australia compared to other countries.

Some Australian states also have their own standards for shower heads, such as New South Wales, that require a specific M12 x 1. 0 thread size for shower heads. To determine what size you may need for your shower head in Australia, you should look at your existing shower’s thread size or take a look inside the water pipe for the shower head.

Different states in Australia may also have other restrictions which you should look into before making a purchase.

How do I know if my shower head is compatible?

To determine if your shower head is compatible, there are a few key things to consider. First, look at the attachment of the shower head. Generally, shower heads are either screw-in (with a threaded attachment) or can be attached using a hand-held shower bracket.

If you have a screw-in shower head, make sure it is compatible with the corresponding threads on the shower arm or pipe. If it is a hand-held shower bracket, make sure the shower head is compatible with the shower arm or pipe.

The second consideration is the water flow. To ensure the best possible shower experience, make sure the shower head offers a consistent water flow, regardless of the pressure or temperature of the water.

Some shower heads have flow restrictors that reduce the amount of water flow that the shower head releases, and may require a specific type of shower head.

Finally, look for the certifications that your shower head has. Generally, it should be certified by an independent testing laboratory, such as UL, NSF, or CSA. This certification indicates that the shower head meets strict safety and performance standards.

By considering all of these factors, you’ll be able to determine if your shower head is compatible with your fixtures and shower arm.

Are shower heads standard fitting?

Shower heads are generally considered ‘standard fitting’; however, the exact specifics of the fitting may vary from property to property. Generally, shower heads fit onto the pipe coming out of the wall (most commonly a 1/2 inch BSP tapered thread) using an easily adjustable and secure hand-tightened fitting.

However, depending on the installation, some properties may require more specialised fittings. For example, some shower heads may require a diverter valve or a shower arm adapter. It is always a good idea to check with a professional plumber prior to installation, to determine the best fit for your property.

How do you replace a shower head in Australia?

The short answer to this question is that you can replace a shower head in Australia simply by unscrewing the existing shower head and replacing it with the new one. However, it’s important to note that there are a few steps you’ll need to take to ensure that the replacement is done safely and correctly.

The first step is to switch off the water supply to the shower area. The water mains can generally be found inside the house and will be clearly marked. Once you have switched off the water supply, open the showerhead and use a pair of pliers to unscrew the old/existing shower head.

Once unscrewed, take the old shower head outside and dispose of it responsibly.

Next, take the new showerhead outside and bring it back in with you. Give the showerhead a thorough cleaning to make sure that the connections are not blocked. Reattach the new shower head to the shower pipe and use pliers to tighten the connection securely.

Once everything is connected, switch the water mains back on and test the showerhead to make sure that it is functioning as expected. You may need to adjust the pressure or flow of the water if necessary.

Be mindful that this process may only take 10-15 minutes, but it can be significantly longer if you have never done this before or if the plumbing needs an adjustment.

Finally, once the showerhead is functioning as expected, it is important for safety and hygiene reasons to carry out an occasional deep clean of the showerhead to prevent the build-up of soap and grime.

This will ensure that it remains functioning properly, and also helps to keep it looking fresh and new.

Can I just replace my shower head?

Yes, you can replace your shower head! First, shut off the water to your shower. You can do this by turning off the shut off valves for the shower head or by shutting off the main water supply. Once you’ve done this, use pliers to loosen the retaining nut that is holding the shower head to the pipe, then unscrew it from the pipe.

Once the old shower head has been removed, clean the shower pipe and threads with a wire brush. Now, you can install the new shower head. Make sure that it is compatible with the shower arm, and then use pliers to tighten the retaining nut to secure it.

Finally, turn the water back on, and test out your new shower head.

Do I need an electrician to fit a shower?

Yes, it is usually recommended to hire a qualified electrician to fit a shower as this is complicated work that requires specialist knowledge. Depending on the type of shower you plan to install, and whether you have an existing electrical system, you may need an electrician to set up the appropriate wiring and circuits for your new shower.

Electrical systems are complex and potentially hazardous, and it’s essential to ensure that new installations meet local building and electrical codes. A qualified electrician will also advise you on the most appropriate type of shower and installation for your needs, and any additional safety measures which might be necessary.

Cutting corners in such electrics can be very dangerous, so it is important to hire a qualified electrician who has the necessary experience and expertise.

Can you use a different brand shower head?

Yes, you can use a different brand shower head. So you can choose one that meets your needs. When purchasing a shower head, you should consider the size, shape, design, cost, and water pressure. Different brands may offer different features, such as adjustable settings or water-saving features.

If you currently have a shower head, it may be difficult to switch to a different brand. In this case, you may need to contact a professional to ensure the new shower head is properly installed and compatible with your current system.

Be sure to take measurements of your old shower head and compare to the measurements of the new one before making your purchase.

What is a standard shower size in Australia?

The standard shower size in Australia typically varies depending on the bathroom size, individual needs and preferences, and the type of shower being installed. Generally, the standard shower size in Australia falls somewhere between 900mm x 900mm to 1200mm x 1200mm.

If you’re looking to fit a walk-in shower, the size can go up to greater lengths with no door to accommodate other fixtures such as a bench seat and/or shelves.

Can you replace a shower head without replacing the valve?

Yes, you can replace a shower head without replacing the valve. Before beginning any work, make sure to turn off the water supplies to the shower area. Once you have done that, you can then unscrew the old shower head with a pair of pliers.

If the shower head won’t unscrew, you can use some lubricant to help loosen it. Once the old shower head is off, inspect the threads at the end of the pipe coming out of the valve. Make sure there are no rust or debris build up in the threads.

If there is, use a plumbers brush or steel wool to clear it. Once cleaned, you can then dye thread the new shower head on and then properly tighten it to ensure a secure fitment. Once the new shower head is on, you can then turn the water supplies back on and test the new shower head for any leaks.

Do I need a plumber to replace shower head?

Yes, you will likely need to hire a plumber to replace your shower head. While the process of replacing a shower head can seem simple and straightforward, it usually involves more complex work than most DIY enthusiasts are comfortable with.

Typical shower head installation requires connections to copper, PVC, or PEX pipes, as well as making sure that the new head is placed at the proper angle and torque. Furthermore, previous shower head installations often contain hidden connections, or connections that are difficult to reach.

Considering the difficulties that can come with replacing a shower head, it is generally advisable to hire an experienced and licensed plumber to take on the job.

How much does a plumber charge to install a shower head?

The cost of having a plumber install a shower head will depend on a number of factors, like the complexity of the job, the type of shower head being installed, and the size of the plumbing job. Generally speaking, a basic shower head installation, such as replacing an existing one with a new one, can cost anywhere from $50 to $150, although prices can be higher for more complex tasks, like installing a wall-mounted shower head or replacing an existing plumbing system.

Depending on the difficulty of the job and the complexity of the job, it’s possible to pay up to $500 or more to have a plumber install a shower head. To get a better idea of the cost, it’s best to contact a licensed plumber to get a quote and a time estimate.

What is the easiest way to remove an old shower head?

The easiest way to remove an old shower head is to first shut off the water to the shower. Once the water is shut off, you can use a pair of adjustable pliers or a large adjustable wrench to loosen the shower head from the pipe.

If the head will not budge, you may need to apply some penetrating oil (such as WD-40) to the threads of the shower head, wait a few minutes and then try turning the head counterclockwise to remove it.

If it is still stuck, you may need to use a pipe wrench to release it. Once the head is off, use wire brush and steel wool to remove any buildup before installing the new shower head.

Are shower heads easy to replace?

Yes, shower heads are relatively easy to replace. The process of replacing them will depend on what type of shower head you have, but generally, it is a fairly straightforward job. If you have a standard type of shower head, all you need to do is unscrew the old shower head and take it off, then put the new one in place and tighten it up.

You may need a wrench or pliers to remove the old one, and a little bit of force may be required. If you have a more complex type of shower head, such as one with a diverter valve or head with multiple sprayer settings, you will likely need to purchase a new shower arm to accompany the new head.

To install this type of shower head, you’ll need to partially disassemble the shower head, remove the old one, and replace it with the new head and new shower arm. It’s best to shut off the water before beginning, and you may need to consult with a professional to make sure you get the right part.

Overall, though, replacing a shower head is a fairly simple and straightforward process that anyone can do.

How hard is it to change a shower head?

Changing a shower head is not a difficult task, as long as you have the right tools and a basic understanding of how it works. The first step is to turn off the water supply to the shower head. Once the water is shut off, you can use a wrench to loosen the shower head from the pipe, then use a rag or towel to catch any water that might come out.

If necessary, you may need to apply some penetrating oil to loosen the head and make it easier to take off. Once the shower head is removed, you can install the new one and reattach it to the pipe. After it’s attached, you can turn the water back on, check for any leaks, and then turn the shower head on and off to make sure everything is working properly.

Overall, the process should take no more than 10 minutes and is a straightforward job.

How much does it cost to have a plumber replace a shower valve?

The cost of having a plumber replace a shower valve can vary depending on the complexity of the job and the cost of materials. Factors such as the brand of valve and any installation fees may also affect the final cost.

Generally, a plumber may charge an hourly rate plus any additional fees for materials, making the cost anywhere from $100 on the low end to $800 or more on the higher end. Some plumbing companies may also provide a free estimate for the job.

In either case, it is important to research different plumbers and their pricing to ensure the best value for your money.