No, not all toilet seats fit every toilet. Toilet seats come in various shapes, sizes and style to suit different toilets. Elongated and round toilet seats are the two main sizes available. Elongated toilet seats are longer than round toilet seats and typically measure between 18.
5 to 19 inches in length. Whereas round toilet seats typically measure 16. 5 to 17 inches in length. Additionally, toilet seats come in different styles such as slow-close seat, heated seat, sensor-activated seat and other styles.
The toilet seat you choose should fit securely on the toilet bowl, allowing all four mounting nut bolts to fit properly and be tightened firmly. Properly fitted toilet seats should not wiggle easily or move from side to side.
How do I know which toilet seat will fit my toilet?
To ensure that you select the right toilet seat for your toilet, you should measure the bowl of the toilet to determine which type of seat you need. To determine the size of the toilet, measure from the center of the mounting holes on the back of the bowl to the front of the bowl.
The standard seat sizes are:
– Round, which is typically 16 1/2 inches
– Elongated, which is 18 1/2 inches
Knowing the size of your toilet bowl is the best way to determine the size of seat that you need. Once you have determined the size, you can then select either a round or elongated seat for your toilet.
Another way to find the correct size of seat for your toilet is to refer to your toilet’s manual or the manufacturer’s website for the exact measurements.
Additionally, it is often helpful to measure the width of the seat you are replacing to ensure that the mounting holes on the new seat line up with the ones on the existing toilet. When you purchase the seat, it should come with mounting hardware and detailed installation instructions that will help you make sure the seat fits your toilet properly.
Are toilet seats one size fits all?
No, toilet seats are not one size fits all. Toilet seats come in a variety of sizes and shapes to accommodate different types of toilets. Some models may cover the entire bowl, while others may just cover the rim.
Toilet seats must be measured for size and shape to ensure a proper fit, so it is important to measure your toilet before purchasing a seat. When choosing your seat, you also need to consider the shape.
Round or elongated toilet seats are typically the most common, but they come in other shapes and sizes as well. Finally, you’ll want to think about the material. Wood, nylon and plastic are all popular choices that come in a variety of colors and finishes.
Ultimately, no two toilets are the same, so the best way to determine which seat is right for yours is to measure and consider the shape and material available.
Are toilet seat fixing holes standard?
No, toilet seat fixing holes are not standard. Depending on the type of toilet seat you have, the fixing holes may differ in size and number. Additionally, the shape of the fixing holes can vary according to the type of toilet you have.
For example, the shape of the fixing holes on one-piece toilets is usually circular, while the shape of the fixing holes on two-piece toilets can vary depending on the manufacturer. To ensure that you get the right toilet seat for your toilet, you should measure the size and shape of the fixing holes before you make a purchase.
Are most toilets 2 or 3 inch?
Most toilets are 3-inch flush valves, meaning that the drain size is 3 inches in diameter. However, some toilet models feature a 2. 5-inch valve, which requires a 2. 5-inch drain pipe size. Toilets with larger flush valves, such as the 3.
5-inch or 4-inch valves, are sometimes used in commercial applications. Although toilets with larger flush valves usually require longer drain pipe runs, they are also known to yield higher water usage and flush performance.
Is my toilet a 10 or 12 inch rough-in?
To determine if your toilet is a 10 or 12 inch rough-in, you need to determine the distance between the mounting holes of the toilet, or the back of your toilet’s base. This measurement is typically referred to as the “rough-in.
” A 10 inch toilet would have a 10-inch rough-in, and a 12 inch toilet would have a 12 inch rough-in. Some toilets may have a 14 inch rough-in. It’s important to know the correct rough-in size of your toilet so you can purchase the right toilet seat and flush valve.
If there is difficulty determining what size toilet rough-in you have, you will may need to measure the distance from the wall to the center of the nearest bolt hole. This will give you the rough-in measurement for your toilet.
Can you replace just the toilet seat?
Yes, you can replace just the toilet seat. This is a relatively straightforward and simple task to do. You’ll need some basic hand tools and the toilet seat itself, which can be purchased from most home improvement stores.
First, you’ll want to check the mounting holes on the side of the toilet bowl. They should be spaced no further than 5 1/2 inches apart for a standard size seat. If the mounting holes are further apart, you’ll need to purchase a longer seat.
Once you have the correct seat, you’ll need to remove the old seat by unscrewing the plastic nuts of the bolts underneath. Then, you should clean the area around the mounting holes so that the new seat can be properly attached.
With the mounting holes clean, place the new seat onto the toilet bowl and place the bolts provided through the holes, making sure that the bolts are all the way through the holes. Then, apply the plastic nuts onto the bolts and hand-tighten them with a wrench.
Finally, check that the seat is secured correctly, and your new toilet seat is installed and ready to use.
Do you need a plumber to replace a toilet seat?
Yes, a plumber can replace or install a toilet seat. Depending on the type of toilet seat you have and the type of toilet you own, the installation process can vary. Generally, a plumber will measure your toilet to find the correct seat size, remove the existing seat, check the fittings on your toilet, apply wax to the toilet bowl surface, ensure the seat fits properly, and then secure the seat into place with the appropriate hardware.
Some toilet seats require special mounting hardware and may need extra steps, so it is important to work with a plumber who is familiar with the type of seat and toilet you have. It is also important that the plumber verifies the seal around the seat to ensure there are no leaks.
It is important to have your toilet seat replaced by a professional to prevent any damage or injury caused due to incorrect installation.
Who is responsible for replacing a toilet seat?
Typically, the homeowner is responsible for replacing a toilet seat. Depending on the age of the house, replacing a toilet seat may be a simple task or require the help of a professional to ensure it is installed safely and securely.
If a new toilet seat is required, it is best to purchase one that is compatible with the existing toilet. This includes sizing the toilet seat to match the width and shape of the bowl, and confirming that the fixing holes in the pan and the toilet seat line up accurately.
Once the seat has been purchased, the homeowner must now remove and replace the old one. If the old seat is easily accessible, it can be unscrewed using a screwdriver and taken off. A new seat can then be attached, again with a screwdriver, to the same points and secured with the screws provided with the new seat.
If more intricate access is required, such as a plastic cover in the floor around the toilet, then a professional plumber may be required. Following installation of the seat, it is important to check that it is secure and fitted correctly so it will not move or cause any damage or injury.
How often should a toilet seat be replaced?
The time period for replacing a toilet seat varies depending on the type of material used and the individual toilet’s condition. Generally, a seat made of plastic should be replaced every four to five years, while one made of wooden can last up to 10.
Signs that it’s time to replace the seat include cracks or mold on the surface, a loose or wobbly seat, or discoloration. It’s also good to periodically check the hinges and bolts, as they can come loose or break over time.
If they’re worn or damaged, it’s best to replace the entire seat. Additionally, you may want to upgrade the seat if you’re looking to give your bathroom a makeover. However, if the seat looks clean and is in good condition, then there’s no need to replace it at this time.
Is it cheaper to repair or replace a toilet?
Whether it is cheaper to repair or replace your toilet depends on the extent of work needed and the cost of parts. In some cases, it may be best to replace the toilet in order to avoid future repairs or complications.
If the toilet is severely cracked or damaged, it is usually more cost-effective to replace it as opposed to attempting to patch it up. Additionally, if the tank is leaking and old, it may be best to replace the toilet rather than attempt to repair it.
For repairs that may be more minor like a flapper, it is usually more cost-effective to repair rather than replace. However, it is important to note that depending on the age and condition of the toilet, the parts may be difficult to locate or cost more to repair than to replace the toilet overall.
In the end, it is important to assess the work needed and the cost of materials in order to determine if it is cheaper to repair or replace the toilet. With any repair or replacement job, it is also important to factor in the cost of labor in order to determine the total cost of the job.
Can a handyman fix a toilet seat?
Yes, a handyman can fix a toilet seat. Depending on the type of toilet seat, the handyman will need certain tools and materials to complete the job. For example, for a traditional toilet seat, the handyman will need a screwdriver, adjustable wrench, pliers, and a replacement toilet seat.
They will need to start by removing the existing toilet seat by unscrewing the hinge bolts from the toilet bowl. Once the hinge bolts have been removed, the handyman can replace the toilet seat with the new one, using the same hinge bolts.
The new toilet seat should fit tightly into place and the handyman will need to screw the hinge bolts back in to secure the toilet seat.
How long does it take a professional to replace a toilet?
The amount of time it takes a professional to replace a toilet will depend on the complexity of the job. To replace a standard floor-mounted toilet with a new model may take an experienced plumber between 1-2 hours.
If the job requires relocating the toilet to a new part of the room, additional measures such as cutting tile and adding new plumbing, the time frame may be increased to several hours. If any electrical work is necessary, like changing the bathroom light fixture or adding a new outlet, that may add even more time to the job.
Depending on the specific job, the difficulty of the job might increase, and the time the professional needs to replace the toilet could take longer.
Should I replace a 30 year old toilet?
Replacing a toilet can be a great way to save money on water bills and create a more attractive space in your bathroom. However, it’s important to consider a few things before deciding whether or not to replace a 30-year-old toilet.
First, consider the cost of purchasing a new toilet. If the toilet is still in good condition, the cost of replacing it may not be worth it. However, if the toilet is leaking, inefficient and leaking, then it may be worth the cost to replace it.
Generally, a new toilet will save you money in the long run.
Second, consider the age and condition of the toilet. Toilets can typically last around 30 years, so if your toilet is older than that, it may be time to replace it. However, if it is still in good condition and you can’t afford to replace it, consider refinishing it.
Refinishing it can give it a fresh new look and feel while still keeping the existing toilet.
Third, consider the style of the toilet. If you decide to replace the existing toilet, then you may want to upgrade to a different style. This can be a great way to modernize your bathroom and make it feel more stylish.
In summary, if you decide to replace a 30 year old toilet, you should consider the cost, age, and condition of the toilet, as well as the style of the new toilet you wish to install. Replacing a toilet can be a great way to save money on water bills and create a more attractive space in your bathroom.
How much does Home Depot charge for installing a toilet?
The cost for installing a toilet from Home Depot depends on several factors, such as the type of toilet, the size, and the type of installation (DIY or professional). Generally, Home Depot charges between $100 and $600+ for the purchase and installation of a new toilet.
To get an exact estimate on the cost of your toilet installation, contact your local Home Depot store, who would be happy to provide you with an estimate.