Yes, InSinkErator garbage disposals do have a reset button. The reset button is located in the center of the disposal under the sink. It is typically a red triangle button that can be pressed firmly with a screwdriver.
It is recommended to reset the disposal if it begins to hum without activating or if the motor stops. The reset button should always be the first action taken when troubleshooting the disposal. If pressing the reset button does not resolve the issue, the disposal should be unplugged from the power outlet or socket and the circuit breaker should be reset.
It is also important to note that the reset button only works if the unit is still receiving power so make sure it is plugged in. After powering the disposal back on, the reset button should be pressed again.
If the reset button is pressed and the disposal does not activate, it may be a sign of a more serious problem and professional service may be necessary.
How do I reset my Insinkerator garbage disposal?
If you need to reset your Insinkerator garbage disposal, follow the steps below:
1. Unplug the unit from the power source. If the disposal is hardwired, turn off the power at the circuit breaker instead.
2. Find the reset button that should be located on the underside of the unit. This will be at the base of the disposal usually surrounded by a red or black rubber ring.
3. Firmly press and hold the reset button for a minute or two until you feel a pop or click indicating the reset has been successful.
4. Release the reset button and then plug the unit back into the power source.
5. Turn on the water supply at the source and then press the reset button a second time. This will start the reset process.
6. Test the disposal by running cold water from the faucet and activating the disposer with the switch. The disposal should start grinding up whatever food items you have placed in it.
7. Once you’ve confirmed that the reset was successful, you can turn off the disposer and unplug the power source to complete the reset process.
Where is the reset switch on an Insinkerator?
The reset switch on an Insinkerator is typically located near the bottom of the unit, either on the outside of the unit or on the splashguard near the bottom of the sink basin. Depending on the model, you may need to unscrew the bottom panel of the unit to access the switch.
To reset the unit, press firmly on the reset button and hold for at least five seconds, or until the garbage disposal turns back on. If pressing the reset switch does not work, you may need to unplug the garbage disposal from the power source and reset any circuit breakers that have been tripped.
Additionally, you may need to assess the unit for any potential issues that may have caused the reset to occur such as food stuck in the grinding chamber or a clogged drain line. If the reset does not restore proper functionality, you should contact a qualified technician for further assessment.
Where is my garbage disposal reset button?
The location of your garbage disposal reset button will depend on the model of your disposal. Generally, you can locate the reset switch either on the bottom of the disposal unit or along the side. If it is located on the bottom of the unit, the reset button should be accessible if you turn the unit upside down and look near the base of the motor.
Alternatively, it could be located in a small access panel near the side or back of the disposal, behind the sink drain. Check your disposal model manual or contact the manufacturer for assistance if you’re having trouble locating the reset button.
How do you force a garbage disposal to turn?
In order to force a garbage disposal to turn, you will need to locate the reset button underneath the disposal. First, make sure that the electrical power is shut off, either at the circuit breaker or by unplugging the unit.
Next, locate the reset button, which is usually a red or black button located near or near the bottom of the disposal, near the electrical connection. Press and hold the reset button for a few seconds, then use a flashlight to view the blades of the disposal.
If the blades are spinning, release the reset button and you should be able to resume using the garbage disposal. If the blades are still not moving, you may need to check the power source, the reset button, or contact a plumber for more assistance.
What does it mean when your garbage disposal just hums?
When your garbage disposal just hums, it usually means that the motor of the disposal is running but the flywheel or impellers are stuck, either due to an item that has become stuck in the unit or because it just isn’t running properly.
In most cases, the issue can be resolved easily by inserting an allen wrench into the hole on the bottom of the disposal and either rotating it clockwise to reset the disposal or counter-clockwise to manually get the impellers spinning again.
If the wrench does not turn or does not help the disposal to reset itself, you should turn off the power to the disposal, disconnect it, and remove the item that may be stuck inside. If you still cannot remove the item, you may need to call a professional plumber for assistance.
What is the typical lifespan of a garbage disposal?
The typical lifespan of a garbage disposal depends on several factors, such as the type of garbage disposal, the frequency of usage, and the quality of maintenance. Generally speaking, the average lifespan of a garbage disposal is 10-12 years.
However, with proper usage and maintenance, garbage disposals can sometimes last as long as 15-20 years. To ensure the longest lifespan possible out of your garbage disposal, you should always run cold water for at least 15 seconds before and after each use, grind items before disposing of them, avoid large quantities of any one item, and routinely check the drainpipe for leaks or blockages.
A little maintenance can go a long way when it comes to extending the life of your garbage disposal.
What should never go in a garbage disposal?
Never put any of the following items in a garbage disposal: fibrous vegetables such as celery, artichokes, and asparagus; animal bones; coffee grounds; grease, fats, and oils; hard foods such as nuts and seeds, hard shells from eggs, and fruit pits; starchy foods such as potato peels, corn husks, and pasta; at any time.
Also avoid putting any form of plastic, rubber, or metal into the garbage disposal, as these items do not break down and may become tangled in the grinding mechanism. Lastly, do not put any type of chemical or cleaner into the disposal.
These substances can corrode internal parts, as well as harm any person or animal who may come into contact with the hazardous material.
What brand of garbage disposal is best?
When determining what brand of garbage disposal is best, there are a few factors to consider. The size and type of disposals are important to consider. For most households, a ½ HP continuous feed disposal is the most popular choice.
Size is also important. A ½ HP disposal can handle most common needs, while a ¾ HP disposal can handle heavier loads.
When deciding on a brand, look for a model that is highly rated and has a good reputation for quality and durability. A few of the top rated garbage disposal brands include Waste King, InSinkErator, and Moen.
Waste King offers a variety of High-Speed models that are designed for quiet performance and backed by a 10-year In-Home Warranty, so you can rest assured the disposal will last. InSinkErator is the most well-known brand, offering a wide range of disposals from basic to ultra-powerful.
Moen offers a variety of disposals, from basic economy models to new luxurious disposals with innovative features.
In the end, it is important to choose a garbage disposal that fits your needs and budget. Doing research and reading customer reviews can help you make an informed buying decision.
How much does Lowes charge to replace a garbage disposal?
The cost to have Lowe’s replace a garbage disposal depends on the type of disposal and any additional features. If you are buying a new disposal and having Lowe’s install it, the cost can range from around $150 to $500 or more.
This includes disposal removal, disposal installation, disposal wiring, and disposal testing. The cost for replacing an existing disposal is typically lower since the labor and materials for removal and wiring are not required.
On average, replacing an existing disposal can cost anywhere from $90 to $200.
How do you fix a stuck InSinkErator?
If your InSinkErator is stuck, the most likely cause is a blockage in the unit. Follow these steps to fix it:
1. First, turn off the power to the InSinkErator at the main circuit breaker.
2. Locate the reset button, which is usually on the underside of the unit. Press and hold the reset button for at least 10 seconds.
3. Unplug the unit, then plug it back in and turn the power back on.
4. Test the unit to see if it is still stuck. If it is still stuck, then you may need to manually free the blockage.
5. Unscrew the four screws on the bottom of the unit using a flathead screwdriver, then carefully remove the top cover.
6. Remove any blockages that are visible inside of the InSinkErator.
7. If a blockage is not visible, then you may need to disassemble the unit further as per the manual.
8. Replace the top cover and screws, and plug the unit back in.
9. Turn the power back on, and test to see if the InSinkErator is operating properly.
If the InSinkErator is still stuck, then it likely has an internal component failure and needs to be replaced. If the issue is determined to be covered by the manufacturer’s warranty, then you may be able to get a free replacement.
Is there a tool to unjam a garbage disposal?
Yes, there is a tool you can use to unjam a garbage disposal. Depending on the type of garbage disposal you have, you may be able to use an allen wrench or a hex wrench to free up the blades in the unit.
You can purchase both tools at most hardware stores and online retailers. If your unit is unable to be unjammed with the allen or hex wrench, then you will need to unplug the unit and use a screwdriver or other small tool to remove the bottom housing.
Once you have the bottom housing removed, you can carefully inspect the blades and remove any small objects that might be stuck in the blades. Once all objects have been removed, you can reassemble the unit and then plug it back in and test it out.
If the unit is still jammed and not operating properly, then it is advisable to contact a qualified technician for further assistance.
Why is my disposal stuck?
If your garbage disposal is stuck, it could be caused by a few different things. First, check to make sure that it is plugged in and receiving power. If it is, then you’ll want to check for foreign objects.
The blades inside the disposal can become jammed if something too large has been put down the drain. If you can locate the object, you should be able to remove it and get the disposal running again.
You should also check the drain pipe to ensure that it is not clogged. Food scraps and other debris can build up and block the flow of water back into the sink. This can cause the disposal to become stuck.
In this case, you may need to use a plumbing snake to clear the clog.
Finally, if everything else checks out, you may need to replace the disposal’s mounting ring. The mounting ring, also known as the “splash guard”, is secured to the top of the disposal and is often the cause of a stuck disposal.
Replacing the splash guard is a fairly easy fix. Simply unscrew the old one and screw in the new one.
If your disposal is still stuck and none of the above solutions worked, it’s best to contact a plumber to ensure that the issue is addressed properly and safely.
Will baking soda and vinegar unclog a garbage disposal?
Yes, using baking soda and vinegar is a safe and effective way to unclog a garbage disposal. First, pour 1/2 cup of baking soda down the drain. Then boil a pot of water and pour that down the drain over the baking soda.
After 10-15 minutes has passed, pour a cup of white vinegar down the drain. The mixture will create a fizzing reaction that will help to break up whatever is clogging the disposal. Allow the mixture to sit for 15 minutes and then flush with hot water.
If the disposal is still clogged, you’ll need to use a plunger to dislodge the blockage.