Skip to Content

Do shower tiles need to go to ceiling?

No, shower tiles do not have to go to the ceiling. Depending on the type of shower you have and the layout of the room, you can choose to lay tiles as high or low as you like. For example, if you have a corner shower with a window, you do not need to tile all the way up to the window but can stop at a certain height that works for the design of the room.

Alternatively, if the shower is a full room without any other openings, you can choose to tile layout tile up to the ceiling if you like. Ultimately the decision is yours, and you should choose the style which you feel gives the best look for your bathroom.

Do you tile up to ceiling?

Yes, it is possible to tile up to the ceiling. This can add an interesting design element to a room, and is a great option when looking to create a feature wall. However, in order to ensure the tile remains firmly in place and looks its best, it is important to ensure the surface is suitable and the adhesive used is of a high quality.

The ceiling must be level, flat and clean to ensure the tiles are securely fixed and any excess grout or adhesive can be easily removed. Additionally, before beginning, you may need to consider any potential waterproofing issues, adjust any existing electrical points and secure trims or capping that could obstruct tiling.

Finally, when tiling up to the ceiling, it can be harder to reach and may require special tools and techniques, so it is important to have a professional installer to ensure the job is done correctly.

How high should shower tile go?

When tiling your shower, the height of the tile will depend on the size of your shower. Typically, tiles should extend to the top edge of the shower pan, or a maximum of two-thirds or three-quarters of the wall height.

If you have a standard 8 foot ceiling, you should try to stay within the 6 to 7 foot range as the ceiling may appear too low if the tile goes all the way up. Additionally, if you want to tile the ceiling, it should also be at this level.

If you have a taller shower, you can extend the tile up to the ceiling height. When considering where to cut the tile, you should remember that the top edge should be perfectly straight and level for a polished look.

Do you grout where tile meets ceiling?

Yes, it is important to grout between the tiles and the ceiling to ensure a proper seal. Grouting will help prevent moisture and dirt build up, and protect your tile installation from long-term damage as a result.

As well, it will help to create a finished, professional look and provide visual continuity between the wall and ceiling tiles. To get the best results, make sure that you are using a water-resistant grout formulated for indoor or outdoor use, depending on the location of your tile installation.

When applying the grout, use a rubber float to push it into the grout lines for a uniform finish. After allowing it to dry for about 24 hours, use a damp sponge to wipe away any excess and then buff the surface with a dry cloth.

Finally, seal the grout to protect it from future staining. As long as you follow these steps, grouting between the tiles and the ceiling will help to create a long-lasting, successfully finished tile installation.

What goes between tile and ceiling?

The material that typically goes between the tile and ceiling is called a cove molding or a bullnose piece. This is typically used when there is a gap between the tile and the ceiling, in order to provide a seamless transition from one to the other.

The cove molding or bullnose piece is usually made of the same material as the tile and is curved in order to provide a gentle curve in the wall and ceiling. This is done in order to prevent water or dirt from getting behind the tiles and causing damage.

Additionally, it also provides a uniform, defined aesthetic. Once the cove molding or bullnose piece is in place, it can then be grouted and sealed for a completely finished look.

How do you tile a floor to a ceiling wall?

Tiling a floor to a ceiling wall can be a tricky but rewarding task. You will need to take accurate measurements of your wall and floor, as well as map out the tile layout on paper. Before starting, it is important to prepare the wall and floor, which includes cleaning, priming, and waterproofing.

To begin tiling, you’ll need to spread a layer of thinset on the wall with a flat trowel and smooth it out. Apply individual tiles to walls starting at the corner, making sure to keep them level and keeping the grout line size consistent – a rubber tool can help you with this.

Once tiles are attached, use a margin trowel to spread grout between them and seal everything off with a sealer. Once the tiles are set, use spacers which will help keep everything aligned and formed straight.

After letting your wall and floor dry, you can apply grout to the floor and wall. Once it is dry, use a grout float to smooth it out before washing off any residue, then let it dry fully. Now you can enjoy beautifully tiled walls and floors!.

Should I tile all the way to the ceiling in kitchen?

It is generally not recommended to tile all the way up to the ceiling in a kitchen as this can make the room feel smaller and more cramped. Tiling up to a certain height, such as three quarters of the way up the wall, can create an interesting contrast and unique look, as well as draw the eye up to the ceiling and make the room feel lighter and brighter.

Additionally, tiling the walls all the way up to the ceiling often involves complex cutting and other time consuming tasks, which could require additional costs. On the other hand, if you have a particularly high ceiling, it can create a luxurious feel if you tile all the way up, as well as helping to protect the wall from moisture and damp.

Ultimately, it depends on the look you are trying to create, the size and shape of the room, and your budget, so it is best to explore a few options before deciding whether or not to tile to the ceiling in your kitchen.

Why do kitchen units not go to the ceiling?

The foremost reason is that it can often be difficult to reach the upper cabinets, especially for shorter people, and it’s not safe to drag chairs over to get the items you need. Also, many upper cabinets are simply used for storing items you don’t need to use on a daily basis.

There may also be safety issues if the upper cabinets are too high. A stack of upper cabinets could cause an obstruction making it difficult to see and work in the kitchen, and in the event of a fire, those upper units can be a hazard.

Lastly, most kitchens have HVAC vents that run across the ceiling and it can be difficult or costly to create cabinets to accommodate these vents.

What should you not do when laying tile?

Firstly, it is important not to lay tiles from the walls in when first starting a tiling project as this can lead to lippage and an uneven tile line. Additionally, it is essential to plan how you will lay the tile in advance and to check that it has been cut to the appropriate sizes.

It is also important not to use too much adhesive to hold the tiles in place. Too much adhesive can make the tiles uneven and unstable. Furthermore, it is important to not apply too much force when pressing the tiles firmly into the adhesive.

Excessive pressure can cause the tiles to crack or create a rough, uneven finish. Similarly, it is important not to start walking or stepping on the tiles until the adhesive has been fully set and cured.

Finally, when working with grout it is important not to skimp on the material or to rush the job with sloppy workmanship. Grout should be applied properly and allowed to cure for the appropriate amount of time to ensure it properly holds the tiles in place.

What comes first floor tiles or ceiling?

The order of installation for floor tiles and ceiling depends on the type of tiles used and their installation technique, as well as the overall construction plan of the home. In most cases, floor tiles should be installed first and then ceiling tiles, as the latter will be less likely to sustain damage or deform during construction if they have already been placed in the ceiling nooks and crannies.

Floor tiles, on the other hand, can be installed later on as they typically require more precise cutting, placement, and grouting which can be tedious and time-consuming. Additionally, any wiring or repairs that need to be done can be done after the floor tiles are in place, allowing them to be easily accessed.

All in all, it is best to install floor tiles before ceiling tiles to avoid any damage or deformation and to complete any electrical work.

What do you put up first ceiling or walls?

When constructing a new space, it is important to consider the order in which to install the ceiling and walls. Generally speaking, it is best to install the ceiling before the walls in order to ensure the structural integrity of the space and to prevent any potential damage.

The ceiling should be installed first as it provides the primary support for the walls, and any work done to the walls afterwards may cause damage to the ceiling or weaken the overall structural stability of the space.

Additionally, the installation of ceiling before walls can prevent the need for additional patching and refinishing work if the walls were damaged during installation. Furthermore, installing the ceiling first allows for electrical wiring to be installed before the walls, as the wires can be hidden within the ceiling voids without having to track them around wall studs after the wall are installed.

Once the ceiling is installed, the walls can be framed up around it. This includes a top plate, bottom plate, and wall studs. It is important to ensure the wall studs are properly secured to the plates to ensure the stability of the walls.

Once the framework is up, the walls can be finished with drywall and other materials such as paneling or shiplap to give the desired look.

In conclusion, it is typically recommended to install the ceiling before the walls in a new space or renovation. This will ensure the structural integrity of the space as well as leak prevention, and will also make electrical wiring and wall installation processes much easier.

What is the correct order to tile a shower?

The correct order to tile a shower is as follows:

1. Start by preparing the surface you will be tiling on. Make sure the walls are clean, dry, and probably flat. You may need to repair or reinforce walls to make them suitable for tiling.

2. Install any pipe and plumbing fixtures that need to be in place before tiling.

3. Measure the walls to determine how much tile you need to purchase.

4. Install a waterproofing membrane or other vapor barrier depending on your local building regulations.

5. Apply a layer of thinset mortar with a notched trowel to the walls.

6. Begin to install the tiles, starting from the middle and working your way outwards.

7. Use spacers to ensure even grouting lines of the tiles.

8. Let the thinset mortar dry and cure for 24-72 hours before grouting.

9. Following the manufacturer’s directions, mix up the grout and spread it over the tile.

10. Wipe off any excess grout with a damp sponge, making sure to get the grout seams.

11. Let the grout dry and cure overnight.

12. Apply a sealant to the tiles to ensure water resistance.

13. Once everything is dry, make sure to run through a final check of the shower before using it.

Where do you start tiling a shower?

When starting to tile a shower, the first step is to prepare the space. This includes protecting the surrounding walls, floors and fixtures with protective coverings and removing any fixtures that may be in the way.

If there is already tile on the shower walls, make sure to chip this off and prepare the walls with an adhesive primer to ensure the new tile adheres properly.

Once the space is ready, the next step is to create a grid pattern for the tiles. Measure and mark the walls, ensuring that the grout lines are the same width. If you are beginning your tiling on one wall and then continuing onto a second wall, make sure to align the two walls so that the grout lines match up.

After creating your pattern, apply mortar to the back of the tiles and then set into the wall one by one, following the pattern. Use a small trowel and rubber float to ensure each tile is correctly spaced and the grout lines are even.

When the mortar is dry, fill in the remaining grout lines, wipe off any grout that might be on the tile surface, and finally seal the tiles.

When laying out a wall What is the first step?

The first step in laying out a wall is to determine the overall size and shape of the wall that you are trying to build. This should include measurements for both the width and height of the wall, which will depend on the area that you are working in and the space that is available.

Additionally, it may also require you to draw out a plan of the wall before starting. Once the overall size and shape of the wall has been established, the next step is to mark out the location of the wall using string and stakes.

This will help to keep the walls straight and level throughout the process. Finally, you should use the measurements from your plan to transfer them onto the construction materials, such as 2x4s, before beginning the process of assembling the wall.

Why hang top drywall first?

Hanging top drywall first is the preferred method when drywalling a ceiling or wall. This method helps ensure that gravity is working in your favor and helps reduce the risk of the joints sagging or cracking over time.

Additionally, it helps make sure that any necessary cuts made in the bottom drywall are just the right size to fit securely between the already hung top drywall and the ceiling or wall. It also helps to ensure exact joint lining on the ceiling/wall as the top plates can be used as a guide for the bottom plates.

It is important to use screws of sufficient length and to alternate the screw heads between each board to ensure the best possible connection.