Skip to Content

Do they make an offset toilet?

Yes, offset toilets do exist and are a great option if you are looking to update the style and functionality of your bathroom. Offset toilets are designed with the tank and bowl placed together, but with an uneven or staggered alignment.

This unique design creates a visually appealing and sleek appearance that makes these toilets stylish additions to any bathroom. Some advantages of an offset toilet include good water efficiency, efficient waste removal without clogging, added comfort due to increased bowl space, and overall improved aesthetics of the bathroom.

Some offset toilet models also feature special features such as dual flushing options, adjustable heights, soft-close lid and seat, and more. To choose the right offset toilet for your bathroom, consider the size and shape of your bathroom, the type of material you prefer, and the features you’d like to have.

Can a toilet be offset?

Yes, a toilet can be offset. This is when the toilet is not centered in the bathroom and is instead located in an off-centered position. An offset toilet can be helpful if your bathroom layout is small or irregularly shaped.

It can also help to create more space in the bathroom if the regular center placement won’t provide enough elbow room. Offsetting a toilet can also help you create room for a bidet or another appliance in the toilet area.

When offsetting a toilet, be sure to account for the space it will take up in the bathroom and make sure to leave enough space for a person to comfortably use the toilet. Additionally, it’s important to check the dimensions of the floor plans to make sure the toilet will fit properly and that the tank won’t hang off the edge of the floor.

Lastly, be sure to use a qualified plumber to complete the installation of the offset toilet.

How do you move a toilet over 2 inches?

Moving a toilet over 2 inches can be achieved in a few steps. First, turn off the water supply to the toilet by finding and shutting off the valve at the wall behind the toilet. Next, flush the toilet a few times to clear out the water in the tank and bowl.

Then, disconnect the water supply line and the waste line, using wrenches to unscrew the nuts that join the two. If possible, you can use a towel to prevent the toilet from rocking or twisting during the relocation process.

After disconnecting the lines, you can use a floor jack to lift the bowl up and move it in the required direction. Place solid supports underneath and jacks on the side at the same level, and use them to lift the bowl.

If necessary, shims may be used to achieve the desired adjustment. Once you have the toilet in place, reconnect the water supply and waste lines, and turn the valve back on. Finally, check for any leaks around the toilet and tighten any bolts or screws as necessary before testing for any potential problems.

How do you measure toilet offset?

Measuring the toilet offset is relatively straightforward and can be accomplished in the following steps:

1. Place a level across the toilet flange, the lip that connects the toilet and the drainpipe in the floor. Make sure the level is set firmly in place.

2. Measure the distance from the floor to the bottom of the level. This will be your starting measurement.

3. Place a measuring tape at the back of the toilet, and measure from the floor to the center of the bolt holes at the base of the toilet.

4. Subtract the first measurement from the second. The resulting number is the toilet offset. If the number is a positive number, the toilet is set too high, and if the number is negative, the toilet is set too low.

In order to ensure that the toilet is at the optimal height, the toilet should be adjusted so the offset is 0. Generally, the toilet should be raised or lowered to adjust the offset.

How do you fix a toilet that is too far from the wall?

To fix a toilet that is too far from the wall, the first step is to turn the water supply off at the shut-off valve, usually located somewhere near the base of the toilet. Next, flush the toilet to remove the remaining water.

Take out the screws, bolts and nuts holding the tank to the bowl. Be sure to save the joint washers, bolts and nuts for re-installation. Place a level on the tank, and adjust the height of the tank with shims (small pieces of wood) to get the toilet properly leveled.

Make sure that the tank and the bowl are leveled on all sides. Once you have achieved the desired level, fix the tank back to the bowl with the joint washers, nuts, and bolts that have been removed earlier.

Finally, turn the water supply on and check for leaks. If there are no leaks, you have successfully fixed the toilet that was too far from the wall.

How far can you run a toilet without a vent?

Without a vent, you should not run a toilet more than 400 feet from the stack, with at least a quarter inch slope down. If your runs are any longer than that, or with less than the required slope, it may lead to higher possibility of backups or clogs.

Additionally, you should use a 4-inch pipe for the drain line and vent to guarantee good air circulation and prevent clogs. Where possible, use long, straight runs of pipe with as few turns as possible to reduce the potential for clogs, and remember to periodically check your vent to ensure proper clearance.

Can you have a flushing toilet off grid?

Yes, you can have a flushing toilet off grid. There are a variety of options available for those who want to maintain adequate sanitation standards of living without a connection to the city water supply.

Composting toilets are one option, which rely on a combination of natural decomposition and thermal mass to break down waste. Another option is a vacuum toilet, which operate similar to a standard toilet, but use a simple vacuum mechanism to move waste to a nearby containment tank.

Other options include a grey water tank which stores wastewater, in which bacterial action converts the wastewater into an odourless and natural product that can be safely used in non-edible crops and grass.

Ultimately, there are several viable solutions for off-grid toilets.

What is the minimum slope for a toilet drain pipe?

The minimum slope for a toilet drain pipe is 1/4 inch (6mm) per foot of drain pipe. This is necessary to ensure that water and waste can easily flow through the pipe. If the pipe is too flat or steep, it can cause clogs or other issues.

In addition, it is important to make sure that the pipe is properly vented, so that gasses can escape from the drain properly and safely. All in all, the minimum slope for a toilet drain pipe is 1/4 inch (6mm) per foot of drain pipe in order to ensure adequate and safe waste disposal.

Can you rotate a toilet 90 degrees?

Yes, it is possible to rotate a toilet 90 degrees. To do so properly, it is important to make modifications to the existing piping, since a toilet must connect to a drain system in order to function.

The most important part of the process is determining the correct angle for the new offset closet flange, as well as the orientation of the supply line and vent. If done improperly, it can lead to leaks and flooding.

Additionally, it is important to double check all measurements in order to ensure a proper installation. If you are unsure of how to complete this task, it is best to consult a professional plumber or contractor.

How much does it cost to move a toilet 2 feet?

The cost of moving a toilet 2 feet is usually dependent on the exact nature of the job, the complexity of the work, the local labor market, the number of people needed to complete the job, and in some cases the type of toilet needing to be moved.

Generally speaking, the cost to move a toilet 2 feet is likely to be anywhere between $100 and $300, with the actual cost being highly dependent on the factors listed above. If you are considering a major plumbing job or remodeling project, it is usually best to consult a licensed plumber for an efficient and accurate estimate.

How difficult is it to relocate a toilet?

Relocating a toilet can range from being relatively simple to quite difficult, depending on the job. Some of the factors that will determine how difficult the job will be include the type of toilet you currently have, the project layout, the access to your current plumbing, and the condition of the area where the new toilet is being moved to.

If you have a standard toilet with a 3′ drain pipe and 4″ soil stack, you’ll likely be able to do the job with basic hand tools. Depending on the new location, you may have to cut some pipes and make new PVC connections.

You may also need to upgrade the size of some of the drain pipes and stacks you already have in order to accommodate the new toilet.

If your current toilet is on a raised platform or difficult to access, the relocation may be much more difficult. You may have to also alter the room layout in some way in order to make the job easier.

You may also need to consider the possibility of having to do some demolition work and then do the necessary repairs to complete the job.

In general, a toilet relocation job is possible with some basic plumbing experience, but it’s always best to consult with a qualified plumber first to prevent any unnecessary damage. A knowledgeable plumber can assess the complexity of the job and recommend the best course of action to ensure a successful relocation.

Is it possible to move the location of a toilet?

Yes, it is possible to move the location of a toilet. Depending on the original and desired locations, this may be a very involved or relatively simple process. The degree of difficulty will vary depending on factors such as the distance between the two locations, existing plumbing, flooring and walls, and the age of the home and its existing plumbing system.

In some cases, moving a toilet could simply involve disconnecting the fixtures and relocating them, whereas in other cases, you may need to lay new pipe lines, cut through sheetrock and break up concrete in order to move the toilet.

In any case, it’s best to consult a plumbing contractor who can determine the best course of action for your particular situation.

Can you put a 90 on a toilet flange?

No, you cannot put a 90 on a toilet flange. Toilet flanges are round fittings that attach to the floor of the bathroom and hold the base of the toilet in place. These flanges are usually made of PVC, and a 90 is a type of valve fitting which is not compatible with PVC and will not seal the connection correctly.

Furthermore, the 90 is made to be inserted into the side of a pipe, while the flange is designed to be a flat surface for the toilet base to connect to, making it impossible to put a 90 on a toilet flange.

The correct part for this type of installation is a closet flange, which is specifically designed for mounting a toilet to the floor and is available in several different materials, such as PVC, cast iron, and brass.

Can toilet flange be flush with floor?

Yes, a toilet flange can be flush with the floor. This is actually recommended when installing a toilet, as proper flange placement ensures a strong seal between the floor and waste outlet. The flange should be located so that the top is level with the finished floor surface and screwed into place.

Moreover, the floor around the flange should be leveled around it to create a uniform, flush surface. Additionally, to prevent the toilet from rocking, some builders will add extra screws around the flange to hold it securely in place.

Finally, when setting the toilet in place, use a putty knife to apply wax seal around the base of the toilet to help form the watertight seal between the flange and the toilet.

What is code for distance around a toilet?

The code for the distance around a toilet is generally referred to as the clear floor space around the toilet as set out in the Americans with Disabilities Act of 1990 (ADA). In the requirements set out in the ADA, accessible bathrooms must provide toilet areas with at least 30”x48” of clear floor space positioned for a forward approach.

This clear space must be positioned for a person to approach from a wheelchair and have the ability to turn around and exit the area. Additionally, a clear space of 36” in front of the toilet must extend the full depth of the clearance for this area.