Skip to Content

Does Bath Fitter remove tubs?

No, Bath Fitter does not typically remove tubs. Bath Fitter specializes in providing installations and replacements of specific parts of bathtubs and showers, including walls and liners. They are not a general handyman service and typically do not offer bathtub removal services.

If you’re wanting to remove a bathtub, you may need to contact a professional plumber or construction team who can help with the removal and replacement of the bathtub or shower.

How much does it cost to remove a tub?

The cost to remove a tub will vary based on a number of factors, including the size and type of tub, the complexity of the removal, and the professional you hire to do the job. For example, a simple tub removal may cost around $200 to $400, but larger and more complex tub removals, like those involving freestanding tubs, could cost up to $1,000 or more.

Other factors to consider include additional costs for disposing of the tub, hauling away any debris, and additional costs for cleaning up the area. It’s best to contact a professional and get an estimate as to how much it would cost to remove your specific tub.

Can Bath Fitter go over an acrylic tub?

Yes, Bath Fitter can go over an acrylic tub. Acrylic is a soft and malleable material, which makes it easier to mold and fit into existing fixtures like bathtubs and showers. In fact, many bathroom remodeling companies will offer products that are designed specifically for installation over acrylic tubs.

These products will adhere to the surface of the acrylic and create a watertight seal that prevents moisture from entering the home and protects your tub from potential post-installation damage. Additionally, Bath Fitter products are backed by a limited lifetime warranty, so you can rest assured that your new shower will be protected against material and workmanship defects.

What is the average cost of a Bath Fitter conversion from tub to shower?

The average cost of a Bath Fitter conversion from tub to shower is typically between $2,500 and $4,500. The cost depends on the size of the tub, the material chosen for the shower conversion, and the addition of any extra features.

Installation of a basic three-piece wall system with an acrylic tub and base typically costs less than $3,000 while a luxury, tile conversion can cost up to $8,000. Depending on the final design and amount of labour required, the installation cost can range anywhere from $250 to $1,500.

Does removing bathtub hurt resale?

Removing a bathtub can hurt resale value, depending on the location of the property and the size of the bathroom. In some areas, prospective buyers may be expecting a full bathroom with a bathtub, and not having one may make a property less attractive.

However, if the bathroom is large enough, replacing a bathtub with a large shower could be appealing to some buyers or easily replaced if necessary. If a bathroom is relatively small and a bathtub is large, then removing it can help a potential buyer see the room in a new way and see the potential for a spacious shower.

Ultimately, the decision to remove a bathtub should be made with resale value in mind, but should also be informed by the way the room is used and desired design choices.

Is it cheaper to replace tub or convert to shower?

It depends on the condition of your tub and the scope of the project. Replacing a tub with a new one is typically more expensive than conversion to a shower, although the cost can vary considerably. For the tub replacement, you have to remove the old tub, order and install the new one, and then tile, seal and grout around the edges.

If there is plumbing or electrical work needed, you may also have to pay extra.

Converting a tub to a shower is generally cheaper since it only involves making changes to existing components. Depending on the scale of the project, you may be able to do some of the work yourself, such as removing the old tub and replacing it with a shower base and glass doors.

In addition, you may need to adjust the plumbing and electrical connections, as well as tile, seal and grout the walls. After considering the cost of materials and labor as well as the time it takes to complete the project, you can decide whether replacing or converting to a shower is the best option for you.

Can you change a bathtub into a walk-in shower?

Yes, it is possible to convert an existing bathtub into a walk-in shower. This requires the removal of the existing tub and the installation of a bathtub-to-shower conversion kit. The conversion kit components typically include a shower wall panel, a shower tray, a drain assembly, and a door.

You may also need additional supplies such as plumbing fixtures, water-resistant drywall and tile, adhesive, or grout. In some cases, you may also need to install new plumbing if the bathtub does not have existing shower plumbing.

It is important to note that converting a bathtub to a walk-in shower can take up to a few days. It is best to consult a professional contractor before starting any major renovation projects.

Why do new homes not have bathtubs?

Cost is likely one of the primary reasons, as bathtubs are more expensive and require additional installation time. Many modern families are opting for showers instead of bathtubs due to their efficiency and convenience, so builders may choose to prioritize other features or skip out on a bathtub altogether.

Additionally, today’s homes are being designed in smaller sizes, meaning that there is less space for a bathtub to fit.

Other factors such as individual lifestyle preferences, safety considerations, and local regulations may also contribute to the lack of bathtubs. Since showers don’t require as much deep cleaning and upkeep as bathtubs, they’re becoming more popular and common in a variety of settings, including new homes.

Is it worth replacing a bathtub?

Yes, replacing a bathtub can be well worth it. Depending on the type of bathtub you have, a bathtub replacement can improve the overall look of your bathroom and can also increase your home’s value. In addition to aesthetics, new bathtubs also provide a variety of functional benefits.

Newer bathtubs come with slip-resistant surfaces, ADA compliance features, built-in storage, and even TVs and music players for a more enjoyable bathing experience. Furthermore, a new bathtub could be easier to clean and maintain than an old one, and you can choose from a variety of materials, features, and colors to create the perfect look for your bathroom.

Ultimately, the decision is yours, but replacing a bathtub can definitely be worth it.

Will plumber remove tub?

Yes, plumbers can typically remove a bathtub. Before removal, the plumber should ensure that water is shut off and the pipes are disconnected. Furthermore, it is important to be aware of the material the tub is made of and plan the removal accordingly.

Some tubs, like cast iron, can be difficult to remove and may require the use of specialized tools. In some cases, even a jackhammer could be essential in the event of a severe set in around the tub and fixtures.

While plumbers are not demolition experts, they have the ability to deal with both the removal and installation of a bathtub. They can take full responsibility for the process, including plumbing connections and any necessary adjustments to fit the new tub.

What is the way to remove a bathtub?

Removing a bathtub is a major plumbing job, and should be done by a professional. It requires particular tools, extensive knowledge of the plumbing system, and experience working with plumbing. Here’s a general overview of the process involved.

Step 1. Shut off the water supply.

Step 2. Disconnect the overflow by unscrewing the nut that’s mounted on the overflow drain.

Step 3. Cut the caulking around the tub and make sure all the pieces come off so you can remove the tub.

Step 4. Detach the drain by twisting it off its seals. Detach the drain lines with an adjustable wrench.

Step 5. Disconnect the supply lines and disconnect the waste lines.

Step 6. Place boards around the tub to support it, then use straps or slings to hold the tub in place.

Step 7. Use a prybar to carefully detach the tub from the wall.

Step 8. Move the tub carefully and place it in the designated area.

Step 9. Remove the debris from the area and clean out the space where the old tub was.

Step 10. Seal the drain opening to restore water pressure.

It’s important to follow these steps in order for the bathtub to be removed safely, securely, and efficiently. If the job is done incorrectly, it can result in leaks and other plumbing problems. If you don’t feel confident taking on this project yourself, it’s best to leave it to a professional plumber.

How much does it cost to put a new tub over the old one?

The cost of putting a new tub over an old one can vary greatly depending on the size, type and style of the tub, and the complexity of the installation. Generally speaking, the cost of installing a new tub over an old one runs between $500 and $3,500, with an average cost of around $1,500.

This cost includes removing the existing tub and any associated fixtures, installing the new tub and fixtures, connecting the plumbing and installing new tiles, walls, and/or flooring, as necessary. A DIY approach may result in labor and equipment rental costs that reduce the overall cost of the project.

How do you remove a fitted tub?

Removing a fitted tub requires careful planning and execution and should not be taken lightly. Depending on the age and condition of the tub, the project may be more or less difficult. Here are a few steps to help you with the process:

1. Turn off the water supply to the tub and disconnect the plumbing. This should include the shower head, hot and cold water lines, drain, and overflow. Make sure to plug the drains to prevent debris from getting into the pipes.

2. Remove any fixtures attached to the tub such as shower doors, shelves, and other accessories.

3. Remove the sealant or caulk from around the edges of the tub to loosen it and make it easier to access.

4. If your tub is connected to walls or tiles, you will need to cut them away with a crowbar or other tools to free the tub.

5. Use a strong prybar and gloved hands to rock the tub until it comes loose. Once it is free, carefully move the tub out of the bathroom and to the area you want it to be stored.

6. Clean up any dust or mess that was made during the removal process.

Following these steps can help you successfully and safely remove a fitted tub from your bathroom. It is important to note that the project may require additional tools and help from professionals, depending on the age and condition of the tub.

How do you remove a bathtub without destroying walls?

Removing a bathtub without destroying walls is a difficult task that requires great care and knowledge. Generally speaking, the best way to remove a bathtub without damaging walls is to first shut the water off to the tub.

Then you will need to remove any components or fixtures such as the shower head, drain, overflow assembly, and faucets. After these components have been taken out, you can bind the tub to the wall using a wedge or other appropriate tool to secure it firmly.

It is important to make sure the tub is secure before attempting any further actions.

The next step involves cutting out the caulking or sealant that was put around the tub during installation. It is more common to use a chisel and hammer, though a utility knife can also work well. Once the sealant is out, you will be able to remove the nails or screws that were used to secure the tub to the wall.

After the tub is free, you will need to do a little patching up. Any areas which have been broken or are missing can be filled in with joint compound. Make sure to use the appropriate tools to work the compound in and smooth it out.

Once the patching is done, you will be able to replace the faucets, drain, shower head, and other components.

If necessary, you can use a chisel and wet saw to make any adjustments to the walls. Once all is said and done, you will want to check and make sure everything is securely fastened in place, and that all of the caulking and sealant is properly applied.

By doing the process correctly, you will be able to remove a bathtub without destroying walls.