Korky is a brand of toilet repair parts that are compatible with a wide range of toilets, including Toto brand toilets. They offer a variety of specialty flush valves, fill valves, and flush handle kits that are designed to fit Toto models.
Additionally, Korky carries a variety of fill and flush valves, flapper valves and toilet tank/bowl gasket repair kits that are designed to fit most Toto toilets. Many Korky products are approved for use with Toto toilets and come with clear instructions for installation.
How do you install a korky fill valve on a Toto toilet?
To install a Korky fill valve on a Toto toilet, you will need to locate the tank’s fill valve and turn off the water supply. Once the water supply is off, you must disconnect the water supply line from the fill valve and remove the valve from the tank.
Before installing the new Korky fill valve, make sure that the mounting nuts are firmly attached to the new fill valve and the threads seal well. Next, you must attach the water supply line to the new fill valve, making sure to secure the connection with two garden hose washers or a brass nut.
Before inserting the new fill valve into the tank, apply a small amount of silicone grease to the seal at the bottom of the valve. Then, slide the new fill valve into the tank and use the mounting nuts to secure the fill valve to the tank.
After tightening the mounting nuts securely, attach the refill tube to the refill valve.
Once the new fill valve is installed, turn on the water supply and adjust the fill valve to the desired water level. Finally, test the toilet for proper operation before using.
Is korky universal?
Korky is a brand of toilet repair parts and accessories, sold by the Noroto Corporation. While their products are widely available, Korky products are not necessarily universal and so may not suit some brands and models of toilet.
There are plenty of Korky products to choose from, with various sizes and styles of toilet repair parts, but it’s important to check that the product is suitable for your particular brand and model of toilet, as some parts may not be compatible or require additional modifications.
Will Fluidmaster fit Toto?
The answer is yes, Fluidmaster products often fit Toto toilets. Fluidmaster offers a wide variety of toilet fill valves, flush valves and other toilet parts designed to fit most toilet models including Toto toilets.
Fluidmaster has replacement parts that are simple to install, affordable, and come with a 5-year warranty. Check the Fluidmaster website for an easy-to-use toilet model finder to ensure the best fit for your Toto toilet.
What size is a Toto toilet flapper?
The size of a Toto toilet flapper depends on the Toto toilet model. Generally, the flapper sizes range from 2” to 3” in diameter. Generally, the older Toto toilets require a larger flapper for a good seal.
The newer Toto toilets often have a smaller flapper size than their older counterparts.
However, the exact size for your toilet can be determined by reading the instruction manual that came with it, or by measuring the hole in the tank of your toilet and comparing it to the flapper sizes offered from Toto.
Additionally, not all Toto toilets will use the same flapper size. Some Toto models require an adapter to fit the flapper, while other models may require a universal or highly specialized flapper size.
If you are unable to measure the flapper size or find it in the manual, it may be best to consult with someone at Toto for further assistance in determining which flapper size is best for your Toto toilet.
How do I get rid of Toto flapper?
Getting rid of a Toto flapper is a relatively easy process, but it does require some basic knowledge of plumbing and the proper tools. To begin, turn off the water supply to the toilet, which is typically located at the back of the toilet or under the sink.
Next, flush the toilet to drain all the remaining water from the tank. Disconnect the water line from the rear of the tank and then unbolt the tank from the bowl with a wrench. Remove the old Toto flapper and replace it with a new one.
Be sure to make sure the flapper is seated properly within the flush valve assembly. Reattach the tank and turn the water supply back on, then flush the toilet to test the new flapper.
How do I know what size my toilet flapper is?
To determine the size of the toilet flapper you need, it is important to measure the size of the flush valve on the toilet of the existing toilet tank. To do this, you will have to shut off the water supply and remove the existing toilet tank lid.
Once the lid is removed, measure the outside diameter of the flush valve in the bowl. Once you have the measurement, use the chart provided on the flapper packaging to select the right size flapper for your toilet.
The flapper size should also be printed inside the toilet tank at the back and near the bottom, but it can be hard to read in some cases. If the flapper size is not indicated in the tank, it is always best to double check by measuring the flush valve size.
Are most toilet flappers 2 or 3 inch?
Most toilet flappers come in either a 2 or 3-inch size, although there is some variation depending on the make and model. To determine the size that would fit best for your particular toilet, it is important to measure the existing flapper or outlet bottom of the tank.
To ensure a proper fit, it is recommended to match the size of the flapper or outlet with the size of the tank opening. Generally, the 2-inch flappers will fit both 1. 6 and 1. 28-gallon toilets, while the 3-inch flappers are designed for 3.
5-gallon toilets. Keep in mind that different manufacturers have their own sizes and specs, so be sure to check the size and specifications of any flapper or outlet before purchasing for a specific toilet.
How often do toilet flappers need to be replaced?
The frequency at which toilet flappers need to be replaced will depend on a few factors, including the type of flapper being used, the amount of usage, and the water quality in your home. Generally speaking, it is recommended that flappers be replaced at least once a year, and sometimes more frequently in hard water areas.
If your toilet is flushing slowly, or running continuously, this may indicate that it is time to replace the flapper. Additionally, you should inspect the flapper for signs of wear and replace it if there any cracks, tears, or loose parts.
Why does my toilet flapper go down so fast?
The most common one is that the rubber flapper valve inside the tank is old and worn out. Over time these rubber parts can lose their flexibility and won’t form a good seal anymore. This can cause the flapper to close faster, allowing water to escape more quickly and resulting in the tank not filling up properly.
Other possible causes include an improperly adjusted chain or lift wire, calcium buildup on the flapper seal, or the water pressure being too high. With each of these issues, the solution should be slightly different.
You may want to check the chain or lift wire for any slackness and adjust as necessary. If there is calcium buildup, you can try our scale remover products to repair the flapper seal. Lastly, if the water pressure is too high, you can install a pressure-regulating valve to reduce the amount of pressure entering the system.
What happens if you don’t replace toilet flapper?
If you don’t replace a toilet flapper, the problem may worsen and the toilet will eventually not flush properly. In some cases, the toilet may fail to refill with water after flushing, resulting in a failed flush.
This will cause water to continually leak into the toilet bowl, causing the toilet to overflow and flooding the bathroom. Additionally, the poor flushing performance is caused by a limited amount of water being released during the flush cycle which can create difficulties in flushing solid waste.
In some cases, the toilet may even become completely blocked due to the flapper not being able to open sufficiently. Over time, a faulty flapper may also contribute to damage of the internal seals or gaskets that make up the flushing system.
This can cause a wide range of further problems, such as the toilet not refilling or having plenty of water in the bowl but still not flushing properly.
How much does a plumber charge to replace a toilet fill valve?
The cost of having a plumber replace a toilet fill valve can vary widely depending on the complexity of the job, the location of the toilet, and the materials that need to be purchased. Generally, they will charge a flat fee plus parts and labor, with labor costs typically around $45 to $95 per hour.
Most plumbers have a minimum service call fee of around $50 to $75. The total cost will depend on the time it takes to complete the job and the cost of the replacement parts. In most cases, the materials themselves will cost between $20 and $60.
If the plumber needs to move the toilet or replace additional parts, that cost may increase. Additional fees may be applied for complex jobs. It is important to get an accurate estimate of the cost before allowing any work to be done.
Can a fluidmaster fill valve be used on Toto toilet?
Yes, a Fluidmaster Fill Valve can be used on a Toto toilet. As long as the toilet is compatible with a universal fit fill valve, the Fluidmaster will work just fine. Fluidmaster Fill Valves are designed to be universal, fitting most toilet models and brands, including Toto.
Before purchasing, however, you should verify that the Fluidmaster fill valve is compatible with the toilet model and ensure the installation measurements match. That way, you know the Fluidmaster Fill Valve will work for your Toto toilet.
Are Fluidmaster universal?
Yes, Fluidmaster products are designed to be universal, meaning they work in a variety of toilet models and plumbing systems. From the Fluidmaster website: “We design most of our products to be universal, meaning they can be used with a variety of toilet models, styles, and plumbing systems…We strive to ensure our products are easy to use and install, quickly solving your home’s plumbing issues.
Are toilet flush systems interchangeable?
No, toilet flush systems are not interchangeable. Toilets have different types of flushing mechanisms that are specific to the size, shape and make of the toilet. Different brands will have different systems and the parts of a flush system are not universal.
Additionally, upgrading one part of the system, such as the flapper, may not work since the entire system has been designed to work in harmony. It is highly recommended that you purchase replacements as a complete system or contact the manufacturer/supplier of the toilet in order to find compatible replacements.