Skip to Content

Does toilet rough in size matter?

Yes, toilet rough in size does matter when installing a toilet. The rough in size is the measurement from the wall behind the toilet to the center of the toilet drain outlet. It is important to know the rough in size before buying any toilet because all toilets are designed to fit a specific rough in size.

If the measurement is not accurate, you will have to either install an offset flange and bowl or return the toilet and purchase another one that fits the right measurement. Common rough in sizes are 12”, 10”, and 14”, but other sizes are also available.

When measuring the rough in size, make sure the tape measure is touching the surface of the back wall of the toilet so you have an accurate measurement.

What size rough in toilet do I need?

The size of the rough in toilet you need will depend on the type of toilet you are installing – namely where the water connections and toilet waste pipe need to go. Generally, toilets come in either 10”, 12” or 14” rough in sizes, with the 10” and 14” being the most common.

The rough in measurement is the distance from the wall behind the toilet to the center of the waste outlet. You can measure this yourself or look up the specification on the manufacturer websites prior to purchasing the toilet.

Most standard toilets will fit a 12” rough in, however if you are installing a wall-hung toilet, longer bolts may be necessary to accomodate the additional weight. If the rough in size is wrong, it can be difficult, expensive, and time consuming to read just the rough in or make plumbing alterations.

As such, it is important to measure correctly and ensure you purchase a toilet that will fit your existing plumbing before installation.

How do I know if I need a 10 or 12 rough in toilet?

When it comes to choosing the right roughed-in toilet for your plumbing needs, it is important to know what size rough-in toilet you should get. Knowing your exact rough-in measurement is key. A 10-inch rough-in toilet fits best in bathrooms with 10 inches of space between the back wall studs, while the 12-inch size is a good fit for bathrooms with 12 inches of space.

To measure the rough-in distance, measure from the back wall studs to the center of the hole in the floor that the toilet attaches to. The distance between the center of the hole and the wall studs is the rough-in measurement.

If you measure the rough-in distance in your bathroom and it is 10 or 12 inches respectively, then you know that a 10- or 12-inch rough-in toilet will fit. If the measurement is an odd number like 11 or 13 inches, then you may need to buy an offset toilet flange to accommodate the extra 1 or 2 inches.

Once you know your rough-in measurement, you can shop for a toilet that is designed to fit your space. So you can find a toilet that fits your needs and preferences without compromising on quality or performance.

Can you replace a 11 inch rough in toilet with a 12-inch rough in toilet?

Yes, you can replace a 11 inch rough in toilet with a 12-inch rough in toilet, but it is not recommended unless you have to. Generally, a 11 inch rough in toilet is found in older homes, and since toilets mounted on 11 inch rough in fixtures are less common these days, the 12 inch units are more widely available.

If you need to replace your 11 inch toilet, it can be done but there are some steps you will need to follow to make sure the installation is done correctly. First, you will need to measure the distance from the wall to make sure there is enough space for the 12 inch rough in toilet.

If there is not enough space, you may need to drill new holes for the 12 inch rough in fixtures, as well as fixing any damage caused by the drilling process. It is also important to make sure that the area is level and does not require any additional work to level it before you install the 12 inch toilet.

After the measuring and levelling is done and all the parts required for the installation are ready, you can begin the installation process. Make sure all the parts are installed correctly and securely so that the toilet will not become loose or leak over time.

Once it is installed, check that the toilet flushes properly and test the flush multiple times to make sure everything is working correctly. Lastly, seal around the edges of the toilet to help prevent any water leaks.

By using these steps, you should be able to replace your 11 inch rough in toilet with a 12 inch one without any issues.

What does 12-inch rough in size mean for toilets?

12-inch rough in size for toilets refers to the distance from the wall behind the toilet to the center of the waste outlet. This size, which is measured in inches, is the most common size for modern toilets, but other rough in sizes are available.

To determine the rough in size for an existing toilet, measure from the wall to the center of the drain hole. To buy a new toilet, you will need to purchase one that has the same 12-inch rough in size.

If you are replacing an older toilet, you may need a different size. Toilets with a larger rough in size may be necessary for bathrooms with a shorter drain pipe. It’s important to purchase a new toilet that fits the existing rough in size, as switching sizes could cause the toilet to not sit properly on the flange.

Are most toilets 10 or 12 rough in?

The rough in of a toilet is the distance from the finished wall behind it, to the center of the floor flange. Rough-in size can vary from 10 to 12 inches. Generally speaking, most toilets are designed for a 12-inch rough-in, and this is becoming an increasingly popular size.

As recently as a decade ago, 10-inch rough-ins were more common, and most toilets were designed with this size in mind. However, modern bathroom designs are often utilizing the extra space available with a 12-inch rough-in.

That being said, if you are renovating an older home, it is still possible to come across a 10-inch rough-in. Since many of the older toilets haven’t been updated, it is important to check the rough-in size of a toilet before making the purchase.

If your preferences are leaning towards a 10-inch rough-in, you may need to research a bit more to find a suitable model.

Can I use a 10 inch rough in toilet?

Yes, you can use a 10 inch rough in toilet. Rough in toilet dimensions typically measure the distance from the wall behind the toilet to the center of the drainpipe in the floor. A 10 inch rough in toilet will measure 10 inches from the wall to the center of the drainpipe.

10 inch rough in toilets are ideal for small bathrooms that are limited in space. Many standard toilet models are built to a 10 inch rough in size and you can find a wide variety of styles and designs to choose from.

When selecting a 10 inch toilet, always measure the area first to ensure accuracy. Determine if the toilet will fit through the door and ensure there is enough room to get a good seal to the floor. Proper installation is essential for a successful seal and if needed, professional installation is recommended.

Should toilet flange be flush with floor?

Yes, toilet flanges should be flush with the floor. Toilet flanges are the metal rings that attach the toilet to the floor and connect the drain from the toilet to the waste water pipe. If it is not flush with the floor or there is a gap of any size, then you have an issue with the installation of the toilet and it will require attention.

If the toilet flange is not secured properly to the floor, it can cause a leak as the water will not drain properly and can cause major water damage. It is important to make sure the toilet flange is level with the floor and properly sealed so that the toilet can operate correctly.

Is toilet rough in from finished wall?

No, the toilet rough-in measurements are the distance from the finished wall to the centerline of the toilet drain, so they are different measurements. The rough-in measurements should be taken when the wall is unfinished, before the drywall is installed.

The rough-in measurements can also be used as a reference to determine the location of studs and other framing materials located within the wall. Once the wall is finished, the finished wall measurement will be different than the toilet rough-in since the drywall will add thickness to the wall.

It is important to measure the toilet rough-in before you finish the wall so that you have the correct measurement for a properly installed toilet.

Is 2 feet wide enough for a toilet?

No, the recommended width for a toilet is at least 3 feet. It is important to consider having adequate space around the toilet since you need room to transfer onto and off the toilet, as well as being able to maneuver once seated.

It is also important to leave enough aisle space to allow for a bathroom attendant to assist if necessary. Installing a toilet that is only 2 feet wide can make it difficult to fully access the toilet, making it unsafe.

How far to rough in a toilet off the wall?

When it comes to installing a toilet, it is important to ensure that it is installed an appropriate distance away from the wall. The standard rough in for a toilet is 12 inches, meaning that the centerline of the drainpipe should be 12 inches away from the wall behind the toilet.

This distance allows for the proper installation and fit of the toilet, which is between 14 and 15 inches from the finished wall. When installing a toilet, it is important to measure out the 12-inch distance and mark it on the wall with a level.

This will ensure that the toilet is installed properly and further, that the drainpipe is lined up correctly with the floor drain. If the toilet is set too close to the wall, it is likely that the flange of the toilet will not fit, resulting in a leak.

When installing a toilet, it is best to consult the appropriate installation instructions for your specific model of toilet or to contact a professional. Getting the rough in right is important for both the functionality and the aesthetic of the bathroom.

Should I use 3 inch or 4 inch toilet drain?

The size of the toilet drain you ultimately need depends on the type of toilet and the drain size already leading away from the toilet. Generally speaking, toilets come with either 3-inch or 4-inch outlets – but this may vary depending on the make and model of your toilet.

Toilets typically use 3-inch outlets, which are the most common size, making them easier to incorporate into an existing drain system. On the other hand, 4-inch outlets are less common, but their larger size can help prevent clogs.

Before deciding between a 3-inch or 4-inch toilet drain, it’s important to assess the size of the line already present in your home’s drainage system. If it’s a 3-inch line, then you’ll need to use a 3-inch toilet outlet.

If it’s a 4-inch line, then it may be possible to use a 4-inch toilet outlet, or you could opt for a 3-inch outlet if the toilet you choose is designed for this size.

Keep in mind that existing drain lines can be easily upgraded if necessary. If you choose a 4-inch toilet outlet and currently have a 3-inch drain line, then you may need to upgrade the line to accommodate the new toilet.

This upgrade will require the services of a professional plumber.

Ultimately, the size of the toilet drain you should select depends on the make and model of the toilet and the size of the existing drain line in your home. If you’re unsure, it may be best to consult a professional plumber for recommendation on which size to choose.

How much space is behind a 12 in rough-in toilet?

The amount of space behind a 12” rough-in toilet will vary depending on the specific model and installation. However, in general, you can expect between 5” and 6” of space between the wall and the back of the toilet.

This will provide enough space for the wax ring and mounting flange that are required for installation, as well as any tools or supplies needed. The additional space also allows for easier maintenance and cleaning of the area around the toilet and makes it easier to access the area for repairs.

What height of toilet is for seniors?

When considering the best toilet height for seniors, it is important to think about both comfort and access. The ideal toilet height for seniors is approximately 17 to 19 inches, as this allows for more comfortable sitting and standing.

This is also known as a Comfort Height or Right Height toilet, as it is designed with the average consumer in mind. However, it is always best for seniors to check with their doctor about the best toilet height for their bodies and abilities.

Additionally, it is important to consider the space surrounding the toilet, as a person of any height should have enough space to stand safely beside the toilet and not feel cramped or uncomfortable.

Considering these factors will help ensure that the toilet is the right height for senior citizens.

How do you know toilet rough-in size?

To determine the toilet rough-in size, you’ll need to measure the distance from the wall behind the toilet to the center of the closet bolts. It’s important to be as accurate as possible when making this measurement, as the size of the rough-in you choose must match the distance you measure.

As a general rule, there are two common rough-in sizes you’ll likely encounter: 12-inch and 14-inch. To be certain of which size you need, use a tape measure or ruler to measure the distance from the wall behind the toilet to the center of the closet bolts, or, if you have existing plumbing, look for the number on the wax ring or flange that is used to secure the toilet to the floor.

If you’re uncertain, take your measurements to a local home improvement store and ask for advice.