Skip to Content

How big does a bathroom need to be for a tub?

The minimum size of a bathroom with a tub usually depends on the size of the tub. For a standard bathtub, a bathroom should typically be at least 5 feet by 8 feet. This will allow enough space for a standard sized tub, toilet, and sink.

The size can vary based on the size of furniture and accessories, but typically a bathroom with a tub should be no less than 5 feet by 8 feet. The size should also be considered in relation to other rooms in a home.

A bathtub should be located close to the other bedrooms so that it can be used as a bathroom for guests or members of the family. However, too much space dedicated to a bathroom can take away from space in the other areas of the home, so striking a balance between the living areas and bathroom is important when designing the layout of a home.

How much space do you need for a soaking tub and shower?

A soaking tub and shower requires a space that is large enough to comfortably fit both the tub and shower. Typical measurements for the size of the space you need depend on the type of tub you choose and if you plan to install the tub and shower in the same area.

If you plan to have the tub and shower in the same space, then you may need an area approximately 70 inches long and 31 inches wide. This size area should comfortably fit a standard-sized soaking tub, which typically ranges 60-65 inches in length.

When factoring in additional space for the shower, you will need to allow for an additional 36-48 inches for the shower.

Alternatively, if you plan to have a separate area for the shower, then you will need an area that is at least 36-48 inches for it, depending on the type of shower and associated fixtures. The installation of a separate area for the shower will not affect the size of the area required for the soaking tub, as self-standing tubs take up more space and wall-mounted models take up less.

In addition to the size of the space, consideration also must be taken for the height of the ceiling and how much natural light is available in the area you plan to install either the tub or shower. As a rule of thumb, the ceiling height of the area should not be less than seven feet.

For privacy while in the shower, you may want to consider using frosted glass or an opaque shower curtain. You may also want to install a skylight or other artificial lighting in the area.

In sum, the size and layout of the bathroom, as well as its features such as lighting, should all be considered when determining how much space you need for a soaking tub and shower.

What size do you need for a tub?

When it comes to selecting the right tub size, there are different factors to consider and it depends on the size and shape of the space, as well as the number of people who will be using the tub. Generally, larger tubs are best for a spacious bathroom, to accommodate two people and for soaking.

Standard tubs are usually 5 feet long and about 2. 5 feet wide, but sizes can range from 5′ to 8′ long and anywhere from 1. 5′ to 3. 5′ wide. It is important to measure the space to ensure that the selected tub will fit.

If space is limited, corner tubs and small soaking tubs provide a more compact option. Most bathtubs are designed as a one-piece unit, but some multi-piece tubs are available, allowing you to assemble them to fit any size space.

Regardless of the size and shape of the tub, it’s important to select one that is comfortable and deep enough to provide a relaxing spa-like experience.

How small can a bathroom be with a shower?

When considering what size bathroom is best suited with a shower, it is important to note that small bathrooms can still accommodate showers, albeit with a few creative solutions. It is recommended that bathrooms with showers should be at least 5ft x 8ft, or 32 square feet, although some bathrooms may be smaller.

If you’re looking to install a shower in a smaller bathroom, consider a smaller shower base and slim shower door, or a low-profile shower stall that is not too deep. Additionally, wall-mounted sinks can allow for more room for showering.

Finally, think about using a corner shower stall to maximize space and ensure that there is still enough room for a toilet and a sink in the small bathroom.

Is it possible to fit bathtub in small bathroom?

Yes, it is possible to fit a bathtub in a small bathroom. Depending on the size of the bathroom, however, you may need to opt for a corner bathtub or a model designed for smaller spaces, such as a claw-foot tub.

Additionally, good planning and use of the available space is key to creating a successful small bathroom design. Things like installing in-wall storage and shelving, choosing fixtures and features that are narrow and tall, and making use of vertical space can help.

Another great idea is to install a glass panel or shower door in lieu of a traditional shower curtain. This way, you won’t feel so cramped as you shower, and you can also make use of the additional visual space.

With the right design and fixtures, you can easily squeeze a bathtub into even the most limited of spaces.

Can you fit a bath in a small bathroom?

Yes, it is possible to fit a bath in a small bathroom. The key is to select the right bath and make the most of the available space. A slimline corner bath can fit into the corner of a small bathroom and save up to 20% floorspace, while a low-level shallow bath can also be a good option.

It can be a good idea to use as much vertical space as possible, such as wall-mounted storage – this can help to make the most of a limited floor area. When choosing the bath, be sure to measure the available space and opt for shaped designs if necessary.

For example, a back-to-wall or corner-entry bath may be a better option than a straight-sided bath. You may also want to look for an access panel so you can access the pipework, and speak to a professional about the options for adding screens or panels to hide the bath’s plumbing.

What is the smallest shower allowed by code?

The smallest shower allowed by code in the US will vary from state to state, but most states adhere to the minimum shower requirements outlined in the 2015 International Building Code which states that a shower must have a minimum inside dimensions of at least 900mm (36 inches) by 900mm (36 inches) and at least 1500mm (60 inches) of ceiling height.

Additionally, the shower must have a curb or threshold that is at least 50mm (2 inches) high, have walls that extend at least 190mm (7. 5 inches) above the floor, have a clear floor space at least 1000mm (39 inches) square located outside of the swing of the shower door, and a be provided a slip-resistant floor surface.

What is the smallest you can make a walk in shower?

The smallest you can make a walk in shower is 36 in (91 cm) wide by 36 in (91 cm) deep, and it must have a curb that is at least 3 in (7. 5 cm) high. The shower head and plumbing fixtures can be installed on the opposite side of the room or up against the shower wall.

You will also need a shower entrance that is at least 24 in (61 cm) wide for easy access. A 36″ x 36″ shower can work with a standard-sized shower curtain or glass enclosure, but if you want a more spacious feel, you might want to opt for a larger size.

Lastly, you will need to factor in the tiling, fixtures and other decorative elements of your shower to ensure that you get the most out of your space.

How big should a shower be for no door?

The size of a shower with no door should take into account several factors. The size should depend on the size of the bathroom, the size of the person who will be using the shower, and any additional features that you may want to add.

Generally, a no-door shower should have an enclosure that is at least 3 feet wide and 4 feet deep. If you’re installing a shower with a rainfall showerhead, you should increase the enclosure size to at least 4 feet wide and 5 feet deep.

Any additional features, such as a partition wall or extra seating, will require more space. It is important to ensure that you have adequate space to move around in the shower without bumping into the walls.

If you are going to be installing an adjustable shower system, then you may need additional room to account for the arm that extends as well as the height of the shower head. Finally, for no-door showers, adequate ventilation is essential.

Without a door, you will need to allow air to circulate freely to avoid mold and mildew. Providing for good ventilation will help you to create a comfortable and inviting shower space that works for you.

Is a walk in shower cheaper than a tub?

Whether a walk-in shower is cheaper than a tub depends on the installation costs, size, style, and materials used. It can be more costly to install a walk-in shower than a bathtub because it requires more space, water-resistant material, and additional fixtures like a showerhead, faucet, wall shelves, and drainage.

Additionally, since walk-in showers are open, it is important to consider the cost for proper waterproofing material and installation. Another factor to consider is the size of the space needed for installation of the walk-in shower and any additional tiles needed for the walls, as well as the cost for purchasing the shower door and any other accessories.

However, this cost can often be offset by the savings in water usage, since a walk-in shower uses less water per shower than a tub. Ultimately, it is best to compare the cost of each option to determine which is more cost-effective for your particular situation.

Does taking out a tub decrease home value?

The short answer is that taking out a tub can decrease the value of a home. However, this will depend on a few factors.

When potential buyers come to view your home, they will often take into account how many amenities there are such as a bathtub. If they find out that a bathtub has been removed, this could have a negative impact on their decision, as baths are traditionally seen as an important part of a home especially to those looking to buy one.

It is also worth noting that replacing the tub with something more modern, such as a larger shower, may not have as drastic of an effect since many buyers prefer showers over baths.

Additionally, if the tub removal is not done properly, this could also be a turn off to potential buyers. Proper tub removal includes ensuring the area around the tub is properly sealed off and all pipes and wiring are taken care of.

If this is not done, buyers may be put off by any potential water damage or safety issues.

Overall, removing a tub from a property could cause the home to depreciate in value. However, if the removal is done properly and tastefully with a thought-out reason, this could also add value to the home.

It is ultimately down to personal preference as to what a potential buyer will be looking for.

Does a house lose value without a bathtub?

No, a house does not necessarily lose value without a bathtub. While some buyers may prefer homes that have a bathtub, others may not. The reality is that a house can lose or gain value depending on a number of factors, whether it has a bathtub or not being just one of them.

Overall condition, location, market, size, amenities, and upgrade potential all play a major role in determining a home’s market worth. Nowadays, there are plenty of people who prefer the convenience and minimal maintenance of showers over the extra space and expense of bathtubs.

Therefore, if the home is in a desirable market and otherwise in good condition, its value should not be affected negatively by the lack of a bathtub.

Do people still want bathtubs?

Yes, bathtubs are still a popular choice among homeowners and are often a central feature in many bathrooms. In fact, bathtubs are often the primary source of relaxation and comfort, providing a space for long, warm soaks.

Moreover, the aesthetically pleasing, decorative designs of many modern baths make them desirable additions to any bathroom. Furthermore, modern bathtub designs often include features such as air/whirlpool jets, light therapy, temperature control, and even chromatherapy.

These features can help relax and de-stress after a long day, and for this reason, many people still prefer bathtubs over showers. Additionally, some people simply don’t have the space or budget for a full-sized shower, so a bathtub can be the most practical option available.

What is a good size for a soaking tub?

A good size for a soaking tub depends on the size of your available space, as well as how many people will be using the tub. For an individual soak, a tub between 30 and 36 inches wide is usually ideal in order to fit the body comfortably, although a 48-inch tub may be needed for taller people.

For a couple, the ideal size is 60- to 72-inches wide, depending on how snug you would like the fit. If space and budget constraints are not an issue, a two-person tub with a length of 78 or 84 inches will provide plenty of room for two full-body soaks.

Large custom tubs may also be a good option if space allows. In this case, the common sizes range from 78 to 113 inches.

Can you combine soaking tub and shower?

Yes, you can combine a soaking tub and a shower in one area. This is known as a combined bath/shower unit. This type of set-up is particularly popular in bathrooms that are on the smaller side, as it allows for the most efficient use of a limited space.

Combined bath/shower units typically consist of two components – a soaking tub and a shower enclosure – combined to share one common wall. This type of set-up allows for the possibility of showering and bathing in the same space and allows for maximum flexibility in terms of personal preferences.

Many of these combined bath/shower units feature a glass partition wall between the shower and the soaking tub, which helps to separate the two areas while still making the space seem cohesive. Additionally, they often include other features such as seating, safety bars, and massage jets to further enhance the experience of the combined bath/shower space.