Skip to Content

How big does a bathroom with tub need to be?

The exact size of a bathroom with a tub will depend on the size of the tub and the types of fixtures in the bathroom. Generally speaking, the smallest recommended size for a full bathroom with a bathtub is 35-40 square feet.

This size should allow enough space for a standard 5-foot tub, a sink, a toilet, and a few feet of open area around these fixtures. To ensure adequate space for two people in the bathroom at once, it is recommended to have at least 50 square feet of space, allowing enough room for furniture, door swing, and toiletries.

For more luxury bathrooms with Jacuzzi tubs, steam showers, etc. , 80-100 square feet is recommended. It is important to factor in the size of the tub, its shape, and any features the tub may have when calculating the size of a bathroom with a tub.

How much space do you need for a bathroom with tub?

The amount of space needed for a bathroom with tub will depend on the size of the tub and the layout of the rest of the bathroom. Generally speaking, a minimum of 36 to 42 inches in width should be allowed for a tub, while 60 to 72 inches in length should be sufficient.

In addition, a 5-foot area should also be allowed in front of the tub for maneuverability. If you’re installing a shower with a tub, you’ll need even more room, approximately 60 to 72 inches in width and 78 to 84 inches in length.

Keep in mind that these are just general guidelines – actual space requirements may vary depending on the size and style of the tub and the layout of the bathroom. It’s always advisable to make sure you have enough room to comfortably move around the tub and shower area.

Can you fit a tub and shower in a small bathroom?

Yes, it is possible to fit a tub and shower in a small bathroom. There are a variety of different showers that can be used to maximize the space available. A corner shower can be used to help save space, as it fits in the corner of the bathroom instead of taking up valuable floor space.

For the tub, opt for a short, deep-soaking tub which will not take up a lot of room while still providing a comfortable bathing experience. If space permits, a combination tub/shower can also be installed in order to save even more space.

Lastly, a glass shower enclosure helps to open up the space and make the room look bigger. With careful planning and selecting the right fixtures, a tub and shower can be installed successfully in a small bathroom.

What is the ideal bathroom size?

The ideal bathroom size will depend on a variety of factors, such as the size of your residence, the type of bathroom activities you plan to use it for, and how you plan to make use of the space. Generally, bathrooms for a single person will usually be a minimum of 35 square feet, while bathrooms for multiple people should be at least 50 square feet.

In terms of the type of activities you plan to use it for, you will likely want a larger space if you plan to include a bathtub, a separate shower stall, or a separate vanity station in the room. Additionally, if you plan to include built-in storage or shelving in the bathroom, you may need to increase the size for the area to accommodate these features.

Finally, if you expect to have a lot of foot traffic in and out of the bathroom, you may also need to increase the space to provide a comfortable area for users that isn’t crowded or congested.

Do houses sell better with a tub or shower?

Houses can sell better with either a tub or a shower. It ultimately comes down to personal preference and the potential buyer’s requirements. Having both a tub and a shower may be the ideal solution, as it offers the potential buyer more choice and effectively creates two separate bathrooms.

It is generally considered that a bathtub is important for families, as it is easier for parents to bathe their children in a bathtub. Tubs also add a touch of luxury and relaxation to a bathroom, as one can easily take a leisurely bath in a tub.

Showers, on the other hand, are often preferred by people who are looking for a quicker and more practical bathroom experience. Showers also tend to use less water, making them the more economical option.

Ultimately, it is up to the potential buyer to decide if they prefer a tub or a shower, or if they would even like to have both. A seller should consider the demographic their house is targeting when deciding on which type of bath to include.

Can you combine soaking tub and shower?

Yes, it is possible to combine a soaking tub and a shower in one space. By building a custom enclosure with both a tub and a shower, you can create an all-in-one area for both bathing tasks. Depending on the size of the space, the options for a soaking tub and shower combo are limitless.

A popular design is a combination of either a large tile shower with a rainfall showerhead and a deep, freestanding soaking tub. You could also choose a alcove tub with a glass shower enclosure and a rainfall showerhead.

In addition, you can pair the tub with a traditional or handheld showerhead or even a combination of both. When planning out the layout, make sure to choose materials and fixtures that allow for ample ventilation and water protection, as well as keeping an eye on the total budget.

Not only is combining a soaking tub and shower in one space an aesthetically pleasing design element, but it offers a convenient and luxurious bathing experience.

Are soaking tubs worth it?

Whether or not a soaking tub is worth it really depends on personal preference. Soaking tubs tend to be larger, providing a more comfortable and luxurious experience during a bath. It’s also great for those who like to spend extra time in their bath, since the amount of water they hold allows for a longer soaking session.

However, soaking tubs usually require more water to fill and a lot of space to install, making them more expensive and requiring more work than a regular bathtub. Ultimately, the decision of whether or not a soaking tub can be worth it is up to you and your specific lifestyle and budget.

How deep should a soaking bathtub be?

The ideal depth of a soaking bathtub depends on a variety of factors, such as the user’s height and their preference for submerging in the water. Generally, a bathtub should be deep enough for at least some of the user’s body to be submerged, up to the user’s neck or chest.

According to the National Kitchen and Bath Association, the standard soaking bathtub should be 26 to 35 inches deep, which allows enough room for the user to be comfortable while sitting up in the water.

Though, it is possible to find bathtubs that are deeper than these standard depths. Deep soaking tubs are usually more than 32 inches deep and allow for more submerging, perfect for those who want a deeper experience.

Furthermore, certain luxurious Japanese-style soaking tubs allow for full submersion, with depths reaching up to 42 inches. However, it’s important to remember that if a bathtub is too deeply sunken, it can be difficult to get out of.

It’s essential to properly evaluate the parameters of a bathtub before choosing the best depth for you.

Does a tub surround go over drywall?

Yes, a tub surround can go over drywall in many cases. It is important to ensure that any drywall already in place is clean and free of any blemishes or damage, so that the tub surround has a seamless fit against the wall.

You should also ensure that the drywall is thick enough to securely hold the surround. If the drywall is not thick enough, then a backer board should be installed over the drywall before the surround is secured.

Additionally, the walls should be dry and secure before any installation of the surround. Installing appropriate waterproofing materials, such as a membrane or plastic sheet, will help protect the drywall behind your tub surround and ensure that the surround is installed correctly.

Do soaker tubs stay warm?

Yes, most soaker tubs do stay warm because they are insulated and often have heated water circulating around them. This ensures that the water stays at the desired temperature. Additionally, some soaker tubs feature a built-in heating element to maintain the temperature.

While heated water isn’t necessary for soaking, it can be quite enjoyable, especially in colder climates. In addition, some soaker tubs come with additional features such as a built-in thermostat, LED lights and music.

All of these features assist with ensuring that the tub stays warm throughout the soaking process.

Do you need cement board behind tub surround?

Yes, you should use cement board behind a tub surround. Cement boards provide a strong, water-resistant foundation for tile or other waterproofing materials such as acrylic or fiberglass. Cement boards are a great alternative to traditional drywall, and they can hold up better in high-moisture or even wet areas around the tub.

They also provide an extra layer of insulation that can help reduce energy costs over time. Installing cement board behind the tub enclosure will help protect the wall from water damage and prevent mold growth.

Cement board should be installed a minimum of 6-12″ up from where the bottom of the tub and tile will meet. Be sure to use sealants and waterproof membranes along the edges and seams to ensure that no water gets through to the wall behind.

Can a plumber install tub surround?

Yes, a plumber can install a tub surround. Most plumbing contractors are able to install a new surround to replace an old one, or to install a brand new surround. The process of installing a tub surround generally involves measuring the space, cutting and fitting the surround, sealing the seams, caulking, and connecting the drain and overflow controls.

If the tub surround needs to be connected to existing plumbing, then a professional plumber will likely be needed. Plumbers will also be able to identify existing issues that may need to be addressed to ensure that the tub surround installation will be effective in containing water and preventing mold or mildew growth.

Should I insulate behind tub surround?

Yes, it is generally recommended that you should insulate behind your tub surround to help reduce heat loss and save energy. Insulating behind the surround will help keep the tub and tile warm, and also help to reduce outside noise from entering the bathroom.

This will also help to minimize the possibility of water damage; when hot and cold water pipes freeze, they can cause water to leak and seep into the wall cavities. Additionally, if your tub surround is not insulated, condensation can accumulate on the cold surfaces, which could eventually cause mold and mildew to form.

To properly insulate behind the tub surround, you should select a suitable insulation material, such as fiberglass or closed-cell foam, and install it against the back of the tub surround, adhering the insulation tightly to the wall studs.

Be sure to cover the joints between the insulation and the wall studs as well. The type of insulation you use should be fire-resistant and durable enough to be able to withstand moisture in the area.

What size is a small bathroom with shower?

A small bathroom with shower typically ranges from about 30 to 40 square feet, although it may be possible to fit a shower into a much smaller space. This size range will accommodate a shower with a small corner shower enclosure (usually 36” x 36”) with a swinging door, a sink, and a toilet.

To enhance the small bathroom’s functional layout, many people opt for wall-mounted fixtures and sliding shower doors, and less bulky vanity designs. If a home or apartment features a half bath, some homeowners choose to convert this half bath into a three-quarters bath, which gives a small bathroom a really functional layout.

This typically involves replacing the existing toilet and adding a shower enclosure.

What is a good size for a small bathroom?

When it comes to determining a good size for a small bathroom, there are several factors to consider. Weighing function, design and budget are essential for making the most out of a small space. In most cases, the average small bathroom size is between 40 and 50 square feet.

This is just enough room to accommodate a standard toilet, single sink, and bathtub or shower. There may be some wiggle room to fit a vanity and storage, but will require a bit more space.

If space is truly limited, you can work with your builder to design a more tightly packed bathroom space. Stainless steel appliances and slim cabinets are excellent solutions for small spaces. Additionally, utilizing wall-mounted shelving, hooks and other accessories to personalize the room while freeing up valuable floor space.

Keep in mind that a smaller bathroom may require more frequent cleaning, due to the proximity of items to one another. This doesn’t have to be a nuisance, however, if you plan for this with appropriate materials and design.

Utilizing finishing cupboards and high-quality fixtures that won’t require frequent maintenance can be used to cut down on upkeep. Ultimately, when it comes to a successful small bathroom design that truly stands the test of time, practicality is key.