Skip to Content

How can I hide my kitchen range hood?

Hiding a kitchen range hood can be tricky depending on the existing setup of your kitchen, however, there are a few ways that you may be able to achieve this. If you have the space and budget, you could consider building an enclosure or cabinet to conceal the hood.

This can be a very aesthetically pleasing option and a great way to keep the hood out of sight. Alternatively, you could look into purchasing a range hood cover. This is a box-like structure that goes on top of the hood and can be painted and decorated to match your kitchen.

Another option is to install a retractable or pop-up range hood. This is a type of hood that can be raised and hidden when not in use. This can give your kitchen a more modern, sleek look and minimize the visibility of the range hood.

Finally, an option to consider if you want to save on space and cost, is to install a recirculating range hood. This type of hood doesn’t require an external vent and, as such, can be tucked away out of sight.

Whichever option you choose, with a bit of planning and creativity, it is possible to hide a range hood in your kitchen.

Can you cover an existing range hood?

Yes, you can cover an existing range hood, but it may not be the best option for a variety of reasons. If you’re looking for a more aesthetically pleasing look in the kitchen, you may want to consider replacing your existing range hood with a more stylish version as opposed to covering it.

Additionally, a range hood should contain a powerful fan to help vent smoke and odors and clean the air in the kitchen, so covering it could reduce the effectiveness of the fan. If you’re looking for a more economical option, there are also kits available that can help you update and improve the existing range hood.

How do you hide a hood vent above cabinets?

Hiding a hood vent above cabinets is relatively straightforward and can be done with a few simple materials. Start by measuring the space you have to work with so that you can determine how much material you will need.

Next, get some wood panels to use as a frame to fit over the hood vent. Cut the wood to the size you need and attach it to the cabinet using strong brackets or screws. Make sure that the frame is securely attached and not loose in any way.

Then, purchase some wallboard with a flame-retardant rating to cover the frame. Cut the board to the right size and use either adhesive or screws to secure it to the frame. Make sure that all seams are sealed and protected with caulk.

Finally, use a circular saw to cut a hole in the wallboard in the place of where the hood vent is. Cut the hole carefully so that it fits the vent snugly, then attach it to the wallboard with screws or brackets.

Once you have secured the hood vent to the wallboard, attach the wallboard to the cabinets as before. Finally, dust off any excess dust and vacuum away any small pieces of wallboard that may have been created by cutting off the vent.

Your vent will now be firmly in place and invisible above the cabinets.

What can I use instead of a kitchen hood?

If you don’t have a kitchen hood, there are several effective alternatives you can use. One option is to install an exhaust fan near your stovetop which can help ventilate the area. You’ll want to make sure the fan is powerful enough to adequately suck away smoke, grease, and other particles in the air.

You can also invest in an air purifier, which can take out contaminants in your kitchen air and circulate clean air. You can also open the windows to help air out your kitchen or install an exhaust fan in an exterior wall that will vent out smoke and other smells.

Finally, you can also install a decorative mosaic tile or splash guard on the wall near your stovetop to help contain grease and grime and make cleanup easier. All of these alternatives will help rid your kitchen of smoke and other smells without a kitchen hood.

Can you make any range hood ductless?

Yes, it is possible to make a range hood ductless. Range hoods typically have a built-in fan that channels smoke, grease, and steam outside of your kitchen. Most range hoods will require some kind of exhaust ventilation ducting to carry the air to the exterior of your home.

However, there are range hoods available that are designed to be used as ductless range hoods, also known as recirculating range hoods. They operate by filtering the air and then recirculating it back into the kitchen, helping clear your kitchen of smoke and steam without the need for any ducting.

Ductless range hoods are typically quieter than those that require ducting, and can be more energy efficient. They usually require filter changes every 3-6 months, depending on the brand and model, to ensure they remain effective.

What can I do with a gap above my kitchen cabinets?

If you have a gap above your kitchen cabinets, you have plenty of options for what to do with it! One of the most popular is to use the space for extra storage. You can install shallow shelves or hang storage baskets filled with small kitchen items, like wooden spoons, recipe cards, and baking utensils.

If your gap is small, you can invest in stackable storage containers to maximize the available space.

Another idea is to decorate the area above your cabinets. This is a great way to bring interest and life to an otherwise unused area. Hang beautiful artwork, add growth vases with sprigs of greenery, or decorate the area with strings of fairy lights or other decorative accents.

You could also install wall sconces or wallpapered panels.

You can also use the gap above your kitchen cabinets to display keepsakes or treasured mementos. Group these items in pleasing arrangements to create an eye-catching display.

No matter what you decide to do, when it comes to your gap above the kitchen cabinets, use your imagination and create a space that reflects your unique style and brings you joy each time you enter your kitchen.

Does range hood go over backsplash?

The short answer is Yes, a range hood can go over a backsplash. It should be installed in accordance with the manufacturer’s instructions to ensure that it is properly supported and securely attached.

Depending on the size, type, and weight of the range hood, it may require additional support in the form of brackets, screws, or other methods. Additionally, if a backsplash is added once the range hood is already in place, make sure that the hood is firmly attached and won’t be affected by the installation process.

It is important to check that the hood is sealed to the wall to prevent any leaking. Be sure to measure the range hood, backsplash, and the area in between to determine the necessary clearances and any adjustments that may be needed.

Are kitchen backsplashes out of style?

No, kitchen backsplashes are definitely not out of style. In fact, they have become quite popular in recent years. Backsplashes can be an easy and relatively inexpensive way to add a design element to your kitchen.

They can also provide protection to the wall behind a sink, stove, or other areas that might be prone to splashes and spills. Backsplashes come in a variety of materials, such as tile, metal, stone, and glass.

They range in price and complexity, so it’s easy to find something to suit any budget or aesthetic preference. They can be installed as full-wall designs or just behind a sink or countertop. With new design trends such as subway tile, bold colors, and unique patterns, backsplashes remain a popular choice for kitchen design.

Do range hoods have to be vented outside?

Yes, range hoods must be vented outside to ensure safety and proper air flow. All range hoods need to exhaust air somewhere, either outside or through the top of a high wall cabinet or the ceiling. To make sure your kitchen is safe, always vent your range hood outside.

By venting the range hood outside, you will be pushing hot, greasy, smoky air out instead of recirculating it around the kitchen. This may also help with potential odors in the kitchen, as well releasing heat to the outside rather than heating up the kitchen.

The process of venting outside also helps to eliminate excess grease and smoke particles which can build-up and coat the air filter, resulting in the range hood’s overall efficiency decrease when used for an extended period of time.

Can you put a cabinet in front of an air vent?

Yes, you can put a cabinet in front of an air vent, but there are a few things to consider before you do so. First, air vents are often used to ventilate a room and circulate air. Placing a cabinet in front of the air vent can impede air flow, making it more difficult to keep the room well ventilated.

Placing a cabinet in front of the air vent will also cause the air vent to become blocked, which can result in an air-heating issue and result in higher energy bills.

It is possible to put a cabinet in front of an air vent, however, with the proper precautions. Look for a cabinet that allows air flow through it – for example, a bookshelf cabinet with open sides. This type of cabinet will still block the air vent, but will allow some of the air to pass through.

Alternatively, if you choose a standard cabinet, you can install vents in the back of the cabinet or install a fan to help circulate the air through the room.

Finally, you should be aware that if you choose to block the air vent, you will need to plan for some other way to ventilate the room. Otherwise, the air quality will suffer and there is potential for air-related health issues.

How to make a hood vent cover?

Making a hood vent cover requires quite a bit of preparation and careful measurements. First, measure the size of the vent and jot it down so you know exactly what you will be needing. Then, gather the materials you will need: a piece of wood that is larger than the vent, sandpaper, a jigsaw, a ruler, and a pencil.

Next, place the wood piece on a flat surface and use the ruler and pencil to draw a line around the perimeter of the vent to indicate its size. Carefully use the jigsaw to cut the wood piece according to the lines you have drawn.

Then, use the sandpaper to buff the edges and make sure that it fits the vent securely. Finally, drill holes into the wood piece so you can attach it to the hood.

Once you have constructed the hood vent cover, you will need to paint or finish it. If you are using stain, use a brush to apply it to the wood surface. If you are applying paint, use a roller or brush to spread a thin layer over the surface.

Allow the paint or finish to dry completely before reinstalling it.

Now that your hood vent cover is complete, reinstall it over the vent. Use screws and the previously drilled holes in the wood to secure the cover in place. Be sure to be gentle to avoid damaging the material.

Finally, your hood vent cover is complete and ready for use!.

What is the dead space above kitchen cabinets called?

The dead space above kitchen cabinets is often referred to as the “soffit”. Soffits are horizontal moldings that are installed between the upper cabinets and the ceiling, creating a boxed-in appearance.

The soffit can be either plain or decorated, depending on the style and look desired. They serve both a decorative and practical purpose, as they can hide electrical wiring, heating and cooling ducts, and other objects that would otherwise be exposed.

Additionally, they also provide a place to mount lighting, ventilation fans, and kitchen accessories, such as a rangehood or even a wine rack. Soffits can be made from wood, MDF, or other materials and often come in a variety of widths and depths, making them compatible with a wide variety of cabinets.

How do you wrap a hood vent?

Wrapping a hood vent can seem like a daunting task, but if you take your time and follow the steps below, you’ll be able to do it like a pro. First, use a vacuum or air compressor to remove any dust and dirt from the surface of the hood vent.

Next, measure the hood vent and cut a piece of vinyl to fit. Make sure to leave a few centimeters of extra material on all four sides. Once you’ve cut the material to size, heat it up using a heat gun.

Start by heating the back side of the vinyl before moving to the front side — all while keeping the heat gun at least 12 inches away. Once the vinyl is heated, use a flat edge to press it onto the hood vent.

Be sure to take your time to properly align the vinyl before flattening it, as this will determine the final look of the job. Once you press the vinyl onto the vent, use an edge smoother to even out the edges.

Finally, if needed, trim excess vinyl with a razor blade (using the vent’s seams as a guide). And voila! You’ve successfully wrapped your hood vent.

How do you make a shiplap hood?

A shiplap hood is an attractive, easy-to-make piece of decorative kitchen cabinetry that adds a rustic, farmhouse style to any kitchen. To make a shiplap hood, you will need: Plywood, Pine shiplap, Miter saw, 1×2 pine boards, Carpenters glue, Countersink bit, Finish nails, and a Finish nail gun.

Begin by measuring and cutting the plywood to the desired width and depth of your hood. Two pieces of plywood (top and bottom) should be cut and then joined together by using carpenter’s glue and then nailed.

Once the two pieces have been joined, use the 1×2 pine boards, cut to the desired length, to frame the plywood. These 1×2 pine boards can be attached with countersink bit, finish nails, and a nail gun.

Once the 1×2 pine boards are attached, measure and cut the pine shiplap to the appropriate size. Apply carpenter’s glue to the back of the shiplap and attach it to the framed plywood. Use a nail gun to secure the shiplap in place.

Once the shiplap has been securely attached to the frame, you have finished making your shiplap hood!.

How to make a plaster range hood?

Making a plaster range hood is a great way to add a decorative touch to your kitchen. Here is a step-by-step guide on how to make one:

1. Measure the circumference of the space you are working with. Make sure to measure from the ceiling to the countertop for a perfect fit.

2. Purchase plaster joint compound and create a template to follow.

3. Apply the joint compound to the walls in a thin layer, making sure it is spread out evenly.

4. Allow it to dry completely.

5. Trace the template onto a sheet of drywall or plywood and cut it out to create the hood.

6. Line the hood with a layer of insulation to protect the room’s interior.

7. Attach the hood to the wall with screws or nails, making sure that it is secure.

8. Caulk any holes or cracks in the hood.

9. Apply a coat of primer and then a coat of paint, allowing the paint to dry in between coats.

10. Install any desired add-ons such as a light fixture, decorative wood trim, or additional insulation.

Once the plaster range hood has been added, you’ll have a beautiful addition to your kitchen that will make a big difference in the look and feel of the room.