Skip to Content

How can I update my existing bathtub?

To give your existing bathtub a facelift, there are a variety of options to choose from. A simple and cost effective option is reglazing the tub by filling in cracks and chips, and shower surrounds can also be reglazed.

If you’re looking for something more permanent and longer lasting, you can consider refinishing the tub with a new surface coating or changing out an existing bathtub with a new one.

To update a bathtub with a new surface, there is a wide range of materials to choose from. Acrylic tubs are the most popular because they’re low-maintenance and easy to clean, but porcelain, fiberglass and cast iron are also popular choices.

You can also explore the option of replacing the bathtub with a sleek and stylish claw-foot or freestanding tub for an even more dramatic update.

Adding new tiles make a big impact, too. Ceramic tiles are classic and timeless, but there are also other options like wood, marble, and glass tiles. You can use them to create a unique design or simply to frame the bathtub.

To enhance the look, you can also purchase decorative tiles with unique shapes, prints and patterns.

Finally, you can consider replacing old fixtures and hardware with new ones to give the bathtub a modern and stylish vibe. For example, replacing the shower head and faucets, as well as drawer pulls, is an easy way to freshen up your bathtub’s look.

Is it cheaper to refinish or replace a tub?

Whether it is cheaper to refinish or replace a tub depends on several factors. The age, condition, and size of the tub will all play a factor in determining what the more cost-effective option is. If the tub is in fairly good condition, is smaller in size, and is no more than a decade old, refinishing may be the better option as it will be much less expensive than a full replacement.

However, if the tub is larger, is wobbling, has or has had any leaks, is more than a decade old, or has a finish that is not conducive to refinishing, then it would be better to replace it entirely.

When considering costs, it’s important to factor in the initial cost of purchasing a new tub, as well as any additional plumbing and installation costs that might be necessary. The cost of refinishing a tub is typically between $300 to $1,000, depending on the size and type of tub, while the cost of replacing a tub with installation can range from $1,500 to $4,000 for an acrylic tub, and $2,500 to $5,500 for cast iron or solid surface.

Therefore, the best option ultimately depends on the circumstances of the tub and the budget of the homeowner.

How can I make my old tub look new?

Making your old bathtub appear new involves a combination of cleaning and refinishing. Since bathtubs tend to get stained and discolored over time, the most important step is to give it a deep clean.

Start by removing all the residue, soap scum, and dirt on the surface of your tub with a non-abrasive cleaner, a scrub brush, and a damp cloth. Then use a toothbrush to scrub any hard-to-reach areas.

Once your tub is clean and dry, you can either opt to resurface or refinish it. Refinishing is the best option because it will make your bathtub look like new again. This involves having a professional apply a new glaze over the entire surface of the tub in order to address any chips and scratches.

For added protection, you can even opt to add a sealant which will help prevent further wear and tear.

If you would rather do the refinishing yourself, there are many tutorials online to help you out. However, it is important to note that the DIY route usually involves harsh chemicals that could potentially be dangerous to your skin, eyes, and respiratory system.

In the end, making your old bathtub look new again takes time and patience but with the right materials and knowledge, you can have your tub looking like it did when it was first installed.

Is resurfacing a bathtub worth it?

Whether or not it is worth it to resurface a bathtub depends on a few different factors. First, it is important to determine why the resurfacing is necessary. If the tub is old and chipped, resurfacing could be a viable solution.

If the main issue is aesthetic, then resurfacing could be the best option. Additionally, the size of the tub and amount of damage that has occurred would need to be considered. If the tub is a standard size with only minor damage then the cost of resurfacing could be worth it.

If the tub is bigger or has significant damage then a replacement might be necessary.

Overall, the decision of whether or not resurfacing a bathtub is worth it depends on the size and amount of damage. If the tub is a standard size and only requires minor repairs, then resurfacing could be a cost-effective solution.

However, if the tub is excessively large and there is major damage, then a replacement might be a better option.

Can you refinish an existing bathtub?

Yes, you can refinish an existing bathtub. Refinishing a bathtub is a relatively simple and cost-effective way to completely restore its look and functionality. Refinishing a bathtub is necessary when the bathtub becomes worn or stained over time.

The refinishing process involves cleaning the surface of the bathtub, sanding the area, and then applying a new layer of epoxy over the existing finish. After the epoxy has been applied, the bathtub will look brand-new again, without the cost and effort of buying a new one.

Additionally, this method is much more cost-effective than replacing the bathtub, as it can be done quickly and efficiently. Refinishing is a great way to restore and update the look of your bathtub!.

How do you update a bathtub without replacing it?

Updating a bathtub without replacing it is possible, although not as expansive an upgrade as replacing it would be. You can refinish the tub, which will provide a glossy look that eliminates any visible marks and makes the bathtub look like new.

Begin by thoroughly cleaning and drying the bathtub before making any repairs, then sand it and apply an acid etch to prepare the outside properly. You can then apply an epoxy primer and spray the finish, typically a polyurethane or a polyester finish.

These can provide a bright white or off-white finish that looks great. You can also use a plastic tub liner to cover over any chips or other flaws. The liner typically has a textured finish and can be installed in a few hours.

Finally, you can also add visible accenting, such as a tile or marble surround or a new shower curtain rod and showerhead for a more expansive look.

What do professionals use to refinish bathtub?

Professionals typically use specialized tools and products to refinish a bathtub. These include sanders, abrasives, cleaners, etching creams, and protective topcoats. First, professionals will use a sander to thoroughly sand the surface of the bathtub, using fine-grit sandpaper to get a smooth surface and remove any old paint or coating.

After sanding, they will use a degreasing cleaner to remove any dirt or oils that remain on the surface. After cleaning, they will apply an etching cream to create a rough surface, which will help the new coating to adhere.

The new coating is usually an epoxy resin, which is applied in multiple layers. Once each layer dries, the surface should be lightly sanded to remove any lumps or bumps. Finally, a clear topcoat should be applied to provide extra protection for the new finish.

How much does it cost to update a bathtub?

The cost of updating a bathtub will vary depending on the type of materials used, any labor involved and the scope of the project. Generally, a basic bathtub update can cost anywhere from $500 to $2,500+.

This price range includes installing a new tub liner, replacing the bathtub hardware, and refinishing the existing tub. These updates can go up significantly if you’re planning to replace the bathtub, add new tile or tub surround and/or install additional plumbing fixtures such as new valves, additional shower heads, or a handheld shower wand.

Similarly, if you’re updating a bathtub with a walk-in, air, or soaking tub, the cost could exceed $5,000 depending on the brand and features desired. Finally, factors such as your geographical location and the local contractor rates will all factor into the cost of your bathroom remodel.

How much does a bathtub liner cost?

The cost of a bathtub liner varies depending on the type, size, manufacturer, and accessories needed for installation. Standard acrylic bathtub liners typically cost anywhere from $450 to $3,000 or more, with most falling in the range of $600 to $1,400.

Liners that are thicker and more durable usually cost more, on the higher end of the price range. Prices can also vary based on dealership or location of the retailer. Installation labor costs can add anywhere from $200 to $400, depending on the labor involved in the job.

Finally, some models may also require additional accessories such as caulking, clamps, and showerheads, which can add to the price range. All these factors make it hard to come up with a single price range for a bathtub liner, but it’s safe to say most are in the range of $600 to $2,000, with the average cost hovering around $1,000.

Does refinishing a bathtub last long?

Refinishing a bathtub can last for many years depending on how it is done. Proper refinishing involves first stripping and sanding the surface of the existing tub, then applying a special primer, followed by a coat of a special curing agent and then a new coating of finish.

This process should be done expertly and with great care to ensure that the finish lasts as long as possible. Additionally, proper use and maintenance of the tub is essential to extend the life of the finish.

An acrylic finish can last up to 15 years or more while an enamel should last around 10 years. The finish can be extended with regular cleaning and care. Always avoid using harsh cleaners or abrasive scrubbers and use a soft cloth when cleaning.

It is also important to note that a well-installed and maintained bathtub can last for years before it needs to be refinished.

What is the difference between reglazing and resurfacing a bathtub?

Reglazing and resurfacing a bathtub both involve restoring an older, worn out bathtub by either refinishing or replacing material.

Reglazing is a process where the existing surface of a bathtub—usually ceramic, porcelain, or cast iron—is roughened and then applied with several coats of a urethane or epoxy coating. This process is faster and cheaper than replacing the entire tub.

The advantage of reglazing is that it takes only a few hours and can usually be accomplished in one day. The disadvantage is that the reglazed bathtub will be less durable than a resurfaced one.

On the other hand, resurfacing a bathtub involves either replacing, or resurfacing the bathtub using new refinishing materials like polymer, acrylic, or specific epoxies. Resurfacing is more expensive and time-consuming than reglazing, but it is also more durable and aesthetic.

The material used also gives the bathtub a longer lifespan, larger gloss range and higher gloss retention. Furthermore, it is also easier to clean and germ-free.

In conclusion, the main difference between reglazing and resurfacing a bathtub is the quality of the results. Reglazing is cheaper and faster, but resurfacing is longer lasting, easier to clean and offers more aesthetic value.

It all depends on budget, timeframe and the desired level of care of the bathtub.

Why is my Reglazed tub peeling?

It is possible that your reglazed tub is peeling due to a few different factors. The most likely cause is that the original surface wasn’t adequately prepared before the new glazing was applied. Proper surface preparation is necessary to ensure the new glazing adheres properly and that it doesn’t peel, bubble, or crack.

The existing surface must be thoroughly cleaned and sanded before reglazing to remove any dirt, soap, or oils that might prevent the glazing from sticking. Any rust, paint, or other foreign material on the existing surface must also be removed.

It is also possible that the new glazing was not applied correctly, or that the glazing was not of a high enough quality. Poor-quality glazing will not adhere properly and will not last as long as high-quality glazing.

If your tub was not properly prepared for reglazing, or if the glazing was not of the highest quality, it is likely that the glazing will begin to peel over time.

Is there paint for bathtubs?

Yes, there is paint specifically designed for bathtubs. And most are formulated to resist moisture, mildew, and UV rays for long-lasting results. Bathtub paint is typically thicker than wall paint and designed to stick to slick, non-porous surfaces.

Before painting, it’s important to thoroughly clean and sand the bathtub to ensure a proper bond. You’ll also want to make sure any dents or scratches are properly filled before painting. Once prepped, use a brush, roller, or paint sprayer to apply your chosen paint and make sure to go in the same direction for a consistent finish.

After the paint has dried, use a high-grit sandpaper to lightly sand the surface and remove any texture caused by the brushstrokes. Finally, apply a coat of clear sealer to protect the paint job.

What to do with space at end of bath?

There are so many great ways to use the extra space at the end of your bathtub! One interesting idea is to turn it into a mini wine bar. You can install counters and shelves to store your favorite wine bottles, plus glasses and other bar items.

Another idea is to turn it into a relaxing oasis – bring in a cozy chair or loveseat, a small bookshelf for reading material, and a soft rug to complete the look. If you’re feeling creative, you could even paint a mural on the wall behind it! Another great use for this space is to turn it into a miniature spa – install steam and jacuzzi jets, add a few shelves for towels and robes, and then hang a crystal chandelier above it to help create the perfect atmosphere.

The options are only limited by your imagination, so have fun and enjoy this extra space in your home!.

How do you fill the gap at the end of the bath?

Filling the gap at the end of a bath can be done by using a type of bathroom sealant, usually a silicone sealant or similar product. The sealant should be applied by following the instructions included on the product packaging, or by consulting with a professional.

Depending on the specific sealant chosen, it may need to be applied to the underside of the bath using a sealant gun, along with some masking tape to avoid any excess sealant squeezing out. Once applied, the sealant should be allowed to cure, following the instructions.

Once cured, the gaps should be filled and it should be left to dry completely, before being put to use.