Skip to Content

How deep are in the wall toilets?

In-wall toilets are typically installed with the pans between 8” and 14” from the finished floor. The toilet pans should also be installed at least 15” from any cross walls, for a minimum space requirement of about 23” to fit in the in-wall systems.

The toilets are usually positioned with the protruding part of the pan between 10” and 14” from the finished floor. Note that the minimum distance must always be considered when installing in-wall toilets.

The toilet pan should also be positioned flush with the wall, or within ¼” of the wall surface. Where possible, the flange should also be positioned flush with the floor. If the toilet is offset from the wall, either due to a pipe location or to make way for a holding tank, it may require some extra space and may need to be deeper.

Are all toilets 12 inches from wall?

No, all toilets are not necessarily 12 inches from the wall. The standard recommendation is a minimum of 15 inches from wall to the center of the toilet though this may differ depending on the type of toilet and model you are using.

The best way to ensure a proper fit is to measure the area from the wall to the fitting or the flange and make sure it is adequate for your model of toilet. Additionally, some toilets may require more distance from the wall for easy removal and replacement later on down the line.

Having a good understanding of your toilet model and dimensions is important for proper installation.

How much space is needed for a wall-mounted toilet?

When installing a wall-mounted toilet, the minimum clear space needed from the aggressive side must be at least 15 inches from the rough-in to the center of the toilet bowl. This distance is necessary to allow for the standard 12-inch flange to be used.

From the back of the toilet to the wall behind it, there should be at least 21 inches of clearance. This allows for proper installation of the flange and gives extra room to make any necessary adjustments.

Additionally, there should be 18-24 inches of clearance in front of the bowl to provide adequate space to reach the flush lever, seat cover, and tank. Finally, the overall dimensions of the toilet bowl’s width from wall to wall should be at least 20.

5 inches. This allows for proper clearance for installation and for the toilet user to be able to sit comfortably.

Does an in wall toilet save space?

Yes, an in wall toilet does save space. It is a type of toilet that is set into a wall instead of on the floor, meaning it will take up less floor space in your bathroom. In wall toilets usually come complete with a tank and flushing mechanism, and some models may also have a cistern and other accessories built into the wall.

This makes them a great choice for smaller bathrooms, as they are incredibly efficient at making the most of the available space. In wall toilets tend to be quieter and keep the water warmer for longer too, making them a popular choice for modern bathrooms.

What are the disadvantages of wall mounted toilet?

The primary disadvantage to wall mounted toilets is the cost. The installation can be quite costly, as the supply lines and waste need to be run through the wall and the toilet itself may be expensive.

Additionally, wall mounted toilets can often require extensive modifications to be made to the wall structure that can add to the overall cost.

Another disadvantage is the lack of accessibility. Wall mounted toilets are usually fixed at a certain height, meaning that it may be difficult for shorter people or those with physical disabilities to reach and use them comfortably.

They are also difficult to clean because the bowl is attached to the wall and cannot be removed.

Finally, in the event that the toilet needs repair, the process can be time-consuming. It is often necessary to remove several parts of the wall structure to access the supply lines behind the toilet and make necessary repairs.

This can lead to further significant costs and delays.

Are wall hung toilets a good idea?

Wall hung toilets can be a great idea for many homes. From their sleek, modern design to their ease of cleaning, there are many advantages to wall hung toilets. They can help to create a spacious and open feeling in your bathroom.

They are also great for those who need a little extra space, as they extend out of the wall, rather than taking up valuable floor space. Wall hung toilets are also easier to clean as they don’t have all the nooks and crannies that regular toilets have.

Not to mention, with them being suspended, they are sheltered from moisture that could damage the floor or wall. Plus, the installation process typically doesn’t have to be invasive and may even be easier for some homeowners to do themselves.

Of course, you should consider the cost associated with them as well as the compatibility of your home. But overall, wall hung toilets can be a great solution to a more modern and low maintenance look for your bathroom.

What is the toilet height for seniors?

The ideal toilet height for seniors is between 17 and 19 inches. A higher toilet seat (12 inches or higher) is often recommended for an elderly person’s comfort because it provides a comfortable extended seating position, which makes sitting and rising easier.

However, the exact height that is most comfortable for an individual varies as it depends on their height and mobility. Additionally, seniors with certain medical conditions may require special toilet frames with adjustable heights and armrests to help with getting on and off the seat.

It is important to consider the needs of the individual when determining the best height.

How do you clean a wall mounted toilet?

Cleaning a wall mounted toilet is a fairly straightforward process if you know what you’re doing. The first step is to gather the supplies you’re going to need. This includes gloves, a mild cleaner or detergent, a sponge, a soft cloth, and a bucket.

Once you’ve gathered all your supplies, you’ll want to begin by using a soft cloth to remove any dust or dirt from the surface of the toilet. Once that’s done, use your mild cleaner or detergent and your sponge to scrub the entire surface, from top to bottom.

Be sure to rinse off the toilet with clean water after scrubbing.

If there are any tough stains that won’t come out with regular cleaning, you can use a special toilet bowl cleaner and a brush that is specially designed for toilets. Once the stains are gone, be sure to rinse the toilet bowl off with clean water.

Finally, if you want to give your wall-mounted toilet an extra shine, you can use a mild glass cleaner and a soft cloth to polish the surface.

Following these steps should help you get your wall mounted toilet clean in no time.

Can wall mounted toilets fall?

No, wall mounted toilets should not fall. Wall mounted toilets are securely affixed to both the wall and the floor, making it difficult if not impossible for them to come away from the walls. Wall mounted toilets are typically installed with strong bolts, brackets, and/or anchors that are made with high-grade materials that are able to withstand the weight of the toilet and any additional force it will experience over time.

Additionally, wall mounted toilets often come with a mounting kit which includes the necessary hardware and instructions for secure installation. Therefore, if a wall mounted toilet were to be installed according to the manufacturer’s instructions, it should stay securely in place and not experience any movement or falling from the wall.

Where do toilets leak the most?

Toilets can leak from any one of several potential points. The most common type of toilet leak is a drain leak. This type of leak occurs when water seeps between the flange and the wax seal. It can also occur if the flange becomes damaged or corroded due to age or poor installation.

Another potential point of toilet leaks is the tank-to-bowl connection. This is the gasket that seals the tank to the toilet bowl. It can be damaged by age or poor installation and can allow water to leak from the tank into the bowl or onto the floor.

Leaks can also occur around the fill valve seal if it is not properly adjusted or if the components are old and need to be replaced. Finally, a leak at the base of the toilet is another potential source.

This type of leak usually occurs if there is a crack in the toilet, if the wax ring has become weak, or if the bolts that anchor the toilet to the floor are damaged or corroded.

Where is the water in wall hung toilet?

In a wall hung toilet, the water is usually stored in the cistern, which is a large, watertight container that is usually wall-mounted near the toilet. It is connected to the toilet itself by two pipes, one of which is an inlet pipe from the main water supply and the other an outlet pipe to the toilet bowl.

The outlet pipe is typically connected to a flush valve, which is the mechanism that allows water to enter the bowl when it is flushed. The cistern also contains a flush valve and other components that together help to control the flow of water.

How far off the floor is a wall hung toilet?

The height of a wall hung toilet from the floor will depend on several factors. It typically ranges from about 17 inches to 25 inches. This height is measured from the centre of the toilet bowl’s outlet to the finished floor.

It is important to note that the lower the measurement, the more comfortable one will feel while using the toilet. However, the ideal height is typically between 17 to 19 inches. It is also important to note that the greater the height, the more draining options the toilet will have.

It is wise to consult a professional when choosing the right height for the wall hung toilet in order to ensure the best possible comfort and performance.

How far should rough plumbing for toilet be from wall?

Rough plumbing for toilets should typically be placed 12” from the finished wall. Plumbing is typically run every 16” on center and that distance should be taken from either side of the finished wall.

Depending on the specific installation, there may be some variance to these measurements, but they should generally be close to 12” away. When in doubt, it is always best to check with local building codes in your area.

Can you adjust the height of a wall-mounted toilet?

Yes, it is possible to adjust the height of a wall-mounted toilet. Wall-mounted toilets typically have adjustable mounting brackets, allowing you to adjust the height of the toilet. Depending on the type of brackets used, you may be able to adjust the height of the toilet anywhere from 14 to 16 inches above the finished floor.

The National Standard Plumbing Code specifies a minimum rim height of 15 inches and a maximum of 19 inches, so make sure that any adjustments you make to your wall-mounted toilet’s height comply with these standards.

Additionally, adjusting a wall-mounted toilet may require you to relocate the drain. So, the installation of a wall-mounted toilet may require the services of a professional plumber to ensure that the toilet is installed correctly.

Do all toilets sit the same distance from the wall?

No, toilets do not all sit the same distance from the wall. This depends on what kind of toilet you are using. Generally speaking, if you are installing a standard 12-inch rough-in toilet, it will usually need to have a wall-to-bolts measurement of 12 inches.

However, there are certain types of toilets with different rough-ins available, such as toilets with 10-inch, 14-inch and even 16-inch rough-ins. Those toilets will require a different distance from the wall in order to be installed properly.

Additionally, if you install a tankless toilet, the space requirements will often be different, as wall-hung toilets require special space considerations to keep the unit level and secure. Make sure you check your product’s specifications for the correct measurement for installation.