The standard depth for a cabinet over a toilet is typically between 10-14”. This depth should be sufficient to store toilet paper and other small items that may be needed. When considering the depth of a cabinet, it is important to ensure that it will not be too high or interfere with other bathroom fixtures, such as the shower or bath tub.
Additionally, it should be tall enough so that it can be accessed without compromising comfort or safety. It is also important to consider the door swing on the cabinet and make sure there is enough room for the door to open and close freely.
Finally, when measuring for a cabinet, it is important to factor in the thickness of the door, if the door is inset or raised, and the space behind the fixture, so that the desired depth can best be achieved.
How do you hang a bathroom cabinet over a toilet?
1. Start by determining the height to place the cabinet. Depending on your needs, you should try to keep the top of the cabinet at least 18 inches from the ceiling. If the toilet is a high-tank model, it will likely require a higher placement.
2. Mount the back of the cabinet to the wall studs (or the wallboard if no studs exist). Use the longest screws or anchors possible. If available, toggle bolts offer added stability. Make sure the cabinet is level side-to-side and front-to-back.
3. Mark the wall for wall anchors directly behind the cabinet. Pre-drill the holes for the anchors, then tap the anchors into the holes using a hammers.
4. Place the cabinet onto the wall and ensure that it is level and properly supported. Use wooden spacers to make any necessary adjustments.
5. Measure and mark the wall for the mounting brackets, then pre-drill holes. Apply the mounting brackets to the cabinet and secure them with the screws provided.
6. Insert the screws into the wall anchors, then tighten them with a screwdriver. Make sure that all screws or bolts are properly tightened.
7. Make sure the cabinet is still level and secure. Place the toilet back on the floor and make sure the cabinet hangs evenly on both sides.
8. Finish by installing any handles or door locks that came with the cabinet.
How far does cabinet need to be from toilet?
The closest distance that a cabinet should be from a toilet is at least 18 inches. This allows for an ample amount of space that allows for comfortable and convenient access to the cabinet. Additionally, this distance helps to prevent any interference when someone is sitting on or getting off the toilet.
If possible, it can be beneficial to have even more space between the toilet and cabinet to ensure optimal comfort.
How high should a bathroom cabinet be mounted?
The ideal height to mount a bathroom cabinet should depend on the size and shape of the cabinet itself, as well as the size of the bathroom in which the cabinet will be installed. Generally, you should aim to mount the cabinet at a height that is comfortable and accessible to users.
In most cases, this height would be between 66 and 72 inches.
Smaller bathrooms and cabinets may need to be mounted lower than this height. It is also important to make sure that any shelves are also installed at an accessible height; between 50 and 54 inches is recommended.
Additionally, if you have high ceilings, you may be able to mount the cabinet slightly higher than the recommended heights above.
Ultimately, when deciding on the ideal cabinet height to install in your bathroom, it is important to think about the specific needs of bathroom users and adjust accordingly to ensure the best possible comfort and accessibility.
How far should shelves be above a toilet?
The distance that shelves should be above a toilet will depend on the size and shape of the toilet, as well as the size and shape of the shelf. Generally speaking, the bottom of the shelf should be about 12 inches above the seat of the toilet, and should not interfere with the toilet lid or with any functionality of the toilet.
If shelf space is desired above the toilet, it is often best to install shelves that are recessed into the wall, as this will take up less space and provide a safer, more aesthetically pleasing option.
Additionally, make sure to leave enough space for the lid of the toilet to be lifted without being hindered by the shelf.
What do you do with space above toilet?
The space above the toilet can be used to add storage, décor, or even further bathroom amenities. Installing shelves or in-wall cabinets can provide extra storage to tuck away linens, bathroom necessities, and accessories.
Highlight the space with artwork, wallpapers, or even mirrors to lift the style and atmosphere of the bathroom. Alternatively, you could also hang towel racks or extra hooks to make sure all your towels and robes are within reach.
You could also utilize this space to add some unique shelving that blends in with the room’s overall style. Finally, you could use the space to hang a television, add a bluetooth speaker, install a mini-fridge for towels and toiletries, or even install a bidet.
However, if your bathroom is already quite cramped, it’s probably best to stick with the simpler options like shelves, artwork, and towel racks to maximize the space you have.
What is code for distance around a toilet?
The code for distance around a toilet depends on the size of the toilet, the size of the bathroom, and the layout of the room. In general, it is recommended to leave at least 15 inches between the edge of the toilet and any walls or other obstructions.
Depending on the size and shape of the bathroom, the recommended minimum distance from a wall may be larger than this, especially for toilets in smaller bathrooms. Additionally, there should be ample space between the toilet and other objects such as the tub, shower, sink, and bidet.
The recommended minimum distance between a toilet and any of these objects is 24 inches. For safety, it is also important to leave enough space for people to move around the toilet safely, typically at least 48 inches from the edge of the toilet.
What is the minimum distance between toilet and vanity?
The minimum required distance between a toilet and a vanity is typically 15 inches (38. 1 cm). Ideally, there should be at least 30 inches (76. 2 cm) of clearance space between a toilet and other bathroom fixtures, including vanity fixtures and other bathroom items.
This is to provide adequate space for a person to use the facilities and to also provide ample room for cleaning and maintenance of the area. Additionally, the toilet should be more than 15 inches (38.
1 cm) away from any walls so there can be adequate space to place the toilet in the installation process.
How far above a toilet should a picture be hung?
It is recommended that pictures be hung at least six inches above the toilet bowl. This ensures that the picture will not be damaged by any water splashes that could occur. It is also important to make sure that the picture is not too close to electrical outlets or other switches nearby, which could cause it to be damaged in case of electric shock.
Additionally, the picture should not obstruct the toilet seat or interfere with any plumbing behind the walls. If the picture must hang lower, consider using a plastic protective shield between the picture and the toilet.
Finally, make sure that the picture is securely fastened to the wall so it does not fall down if someone pulls on it.
How much headroom above a toilet?
The standard recommended headroom above a toilet is typically between 80 and 92 inches. This provides enough space for a user to comfortably sit on and stand up from the toilet. The exception to this rule is for handicap toilets; these toilets require a minimum of 98 inches of headroom above them.
When in doubt as to how much headroom to provide above a toilet, consult with a contractor or architect for more specific guidance to ensure a safe, comfortable experience for all users.
What is the cabinet in the toilet called?
The cabinet in the toilet is called a vanity, which typically includes a washbasin on top of it. A vanity is often used for storing hygiene products and other items in the bathroom. They vary in size and in styles from smaller, basic models to larger, custom models that may include additional storage space and drawers.
For some people, a vanity plays an important role in their bathroom aesthetic due to the fact that it is typically an attractive feature and can be a center of focus. It may also be used to help create continuity between the design of the bathroom, with other furniture and fixtures.
What can I keep above my toilet?
Above the toilet is an excellent place to store additional items, so make the most of it. Consider adding shelves to the wall above the toilet, or install a floating shelf where you can store extra toilet paper, hand or face towels, a small wastebasket, and any other items you may need.
Be sure you leave plenty of space around the toilet tank so that you can easily access all the products and toiletries. If you have extra space, you can add a framed mirror or hang some wall art that coordinates with the color scheme of your restroom.
You might also consider adding a small plant in the corner, or an essential oil diffuser if you’re into aromatherapy. If you have an extra wall in the room, you could add shelving with decorative items to add a bit of character.
Neon signs and LED lights also add a bit of flair, as well. Displaying candles, photos, and smaller items in glass jars or bowls is also an excellent idea.
How much clearance do you need around a toilet?
When it comes to the amount of clearance you need around your toilet, it depends on the model of the toilet and its shape. Generally, toilets should have a minimum of 15 inches of clearance between the centre of the toilet and any bathroom walls, vanity cabinets, or other fixtures.
This should be measured from the widest part of the toilet, which is typically the tank or the seat. If you have a round toilet, a minimum of 18 inches of clearance is recommended. Additionally, the American Disabilities Act recommends that a toilet should have at least 24 inches of space from the side of the toilet to any adjacent walls to enable wheelchair access.
It is also a good idea to plan for space around the toilet for any tools or cleaning supplies you may need. If you have a larger bathroom, it is a good idea to leave a minimum of 3 feet of clearance in front of the toilet to provide enough space for comfortable usage.
Why is the toilet always next to the shower?
The location of the toilet next to the shower is a common arrangement in many homes due to the fact that it makes sense from a plumbing standpoint. When a shower is installed, a hot and cold water line must be run to the shower, and these same lines can also be used to feed the toilet, thus eliminating the need to run two separate lines.
Additionally, it may be more convenient to have the two fixtures so close together – while they serve two different purposes, they are often used at the same time (particularly when someone is taking a shower).
Having the toilet and shower close together helps to conserve space, makes it easier to access both fixtures, and can often cut down on the amount of labor and materials needed for a particular job.
How far off the wall do you stub up for a toilet?
When stubbing up a toilet, you generally want to leave 8-12 inches of space between the wall and the toilet waste outlet. This will provide enough space for your flushometer valve and associated parts to fit behind the toilet’s tank, as well as help ensure enough clearance for cleaning around the area.
Some people opt to leave even more space for extra convenience when cleaning. As toilet designs are often determined by the size of the room or plumbing connections, be sure to confirm all measurements for your specific application before beginning any work.