If you need to replace the toilet seat in your bathroom, the first step is to take measurements of the existing seat. Use a tape measure to determine the length and width, as well as the shape of the seat.
Look closely at the hinges to determine whether they are plastic, chrome, or brass and make a note of the measurements.
Next, measure the distance from the center of the hinge to the front and back edges of the seat. You will also need to take a measurement of the gap between the seat and the tank.
Now that you have all of your measurements, you are ready to begin shopping for a new seat. You will need to find one with the same shape and width as your existing seat, as well as the correct type of hinge material.
Some models will come with adjustable hinges, so you can choose the correct width.
Finally, check the brand and model of your toilet to make sure that you are ordering a fitting seat. If you are replacing an old seat, you may want to consider upgrading to a padded option. Be sure to double-check your measurements before you buy, so that your new seat fits perfectly.
Are RV toilet seats a standard size?
RV toilet seats have standard sizes similar to those used in residential bathrooms, but since RVs come in different shapes and sizes, these dimensions can vary. The standard sizes for an RV toilet seat are 15” wide by 18” long.
However, some toilets are larger or smaller, so measurements may vary. The seat height can also vary. Some RV toilet seats can come in 17” or 19” tall, depending on the type of toilet and the manufacturer.
To ensure you choose the right size toilet seat for your RV, consider taking exact measurements of the toilet seat opening and compare them with the dimensions of the toilet seat you are interested in purchasing.
What size are RV toilet seats?
RV toilet seats come in a variety of sizes, but most are typically found to be around 16 inches wide. This measurement is the width of the open seat area, and does not include the area that covers the tank, so the overall size of the toilet seat is larger than 16 inches.
The height of an RV toilet seat typically ranges from 10 to 12 inches. If a seat is too high or low, extensions are available to raise the seat or lower it accordingly. Additionally, some RV toilet seats come with extra padding for added comfort.
Are all RV toilets interchangeable?
No, all RV toilets are not interchangeable. Different RV toilets require different parts and installation procedures. The size, shape, and flush system of each toilet must match the specific requirements of the RV bathroom space.
The installation of a replacement toilet also often requires additional materials and tools, such as mounting screws, bolts, washers, gaskets, sealants, and nuts. Furthermore, the new toilet must be positioned in a way that provides adequate space for water and sewer lines, as well as a comfortable seating height.
For these reasons, it is important to purchase a toilet that fits the exact specifications of your RV bathroom.
Can you use a standard toilet seat on an RV toilet?
Yes, you can use a standard toilet seat on an RV toilet as long as the size of the seat is compatible with the size of the RV’s toilet base. Most RV toilets are slightly larger than a typical home toilet so make sure you check the measurements before you buy a seat.
It’s also important that you look for a seat that is sturdy enough to accommodate the weighted lid, otherwise the seat may be difficult to use. Additionally, RV toilets are usually higher than home toilets, so make sure you buy a seat that has enough space for you to sit comfortably.
If the size of the seat is compatible with the RV toilet, you can use a standard seat as long as it has been designed to fit the style and configuration of your RV’s toilet.
How do I know what size my toilet seat is?
To find out what size your toilet seat is, you will need to take some measurements. First, measure the length of your toilet bowl from the front mounting hole to the back mounting hole. There should be two mounting holes located on either side at the back of your toilet bowl.
This will give you the inside measurement of the seat. Then, measure the width of the bowl, from both the left and right sides of the bowl. This will give you the outside measurement of the seat. The size of your toilet seat is determined by combining the inside and outside measurements.
For example, if your inside measurement is 16” and your outside measurement is 17”, your toilet seat size would be 16” x 17”. It is important to use these exact measurements when purchasing a new toilet seat, as different brands may have variations in their seat sizes that could create incompatibility.
Do all toilet seats fit every toilet?
No, not all toilet seats fit every toilet. Toilet seats come in many different sizes and shapes, meaning that one toilet seat may not be compatible with all toilets. The most common toilet seat shapes are rounded and elongated, and you should make sure to measure your toilet before purchasing a seat in order to ensure a proper fit.
Additionally, toilet seats also come in standard and universal sizes, so make sure to verify the size of your toilet before making a purchase. Finally, depending on the model of your toilet, some toilet seat models may fit better than others.
If you’re at all unsure, it’s best to ask an knowledgeable professional at your local hardware store for advice.
Are RV toilet different?
Yes, RV toilets are different from traditional toilets. Typically, an RV toilet operates using a foot pump, with a fresh water supply and an on-board holding tank. An RV toilet is designed to be used with a special chemical cleaner as opposed to regular toilet cleaner.
Additionally, RV toilets are typically smaller and shorter than traditional toilets, making them ideal for smaller spaces. Finally, RV toilets usually come with a waste-holding trap or built-in water line to separate black water and grey water waste, making them easier to clean.
How do I replace my RV toilet with a regular toilet?
Replacing an RV toilet with a regular toilet is possible, but it definitely requires some special considerations. First, you will need to make sure that the size of the regular toilet is compatible with the existing inlet and outlet dimensions, as well as the dimensions of the bathroom area.
You will also need to make sure that there are no obstructions or other issues that would prevent the new toilet from being installed.
In terms of the actual mechanics of replacing the toilet, you will want to start by removing the existing toilet, taking care to disconnect the water supply line and other necessary connections. Once that is done, the new toilet can then be set into place and the water supply line and other connections can be reattached.
Make sure to secure the toilet to the floor with a wax ring and fasten the tank to the wall. After you have installed the toilet, test that it’s functioning correctly and securely, and then connect the water supply and turn on the water.
Finally, check for any leaks.
When replacing an RV toilet with a regular toilet, it’s important to check with a professional plumber if you have any concerns or questions. They will have the knowledge and tools necessary to do the job properly and safely.
What kind of toilets do RVs use?
RVs usually use household toilets that are made of either porcelain or plastic, and the model will depend on the size and type of RV. Standard RV toilets are usually of the compact, low-flush variety.
Many modern RVs are outfitted with residential-style toilets that boast a taller height, more powerful flushing abilities, and often times a much larger bowl size. Toilets in campers and fifth-wheels are capable of having all the features of a home toilet, without needing to take up much space.
In addition, all RV toilets also come with an electric flush with an air actuator or a manually operated flush option.
Can you put a porcelain toilet in an RV?
Yes, you can put a porcelain toilet in an RV. Most RVs today come with porcelain toilets as a standard feature. Porcelain toilets are strong and durable and can withstand the wear and tear associated with an RV lifestyle.
Porcelain toilets offer a more luxurious experience than their plastic counterparts and are easy to clean. However, you may want to check the measurements of your available space to ensure the toilet will fit.
Additionally, since RVs are prone to bouncing and shaking more than your typical home, many RVers opt for a macerating toilet that can handle rough terrain better. They can be a bit more expensive, but some people feel the extra cost is worth the added comfort.
No matter which type of toilet you choose, it’s important to ensure it is properly installed according to the instructions.
How much does it cost to replace an RV toilet?
The cost of replacing an RV toilet can vary based on a variety of factors, such as the type of toilet, installation fees, and the quality of the product. Generally speaking, products range from $50 to $200.
Higher-end models and those that require professional installation can cost up to $1,000. It is always best to do your research to get an accurate estimate of the total cost of your project before deciding on which product to purchase.
Are RV toilet parts universal?
No, RV toilet parts are not universal. Different RV toilets use different parts, so the part you need for one type of toilet may not be the same as what you need for another type of toilet. And they all have different parts that are designed to work together.
When looking for parts for an RV toilet, it’s important to research the model of toilet you have to make sure you’re getting the right parts. Many retailers offer parts for specific types of RV toilets, so it can be helpful to shop around to make sure you’re getting the exact part you need.
Will a regular toilet seat fit a Dometic RV toilet?
Typically, yes, a regular toilet seat will fit a Dometic RV toilet. Dometic RV toilets usually have the same mounting configuration as a traditional toilet, with 2 bolts on the back of the toilet that attach to the base of the toilet seat.
Furthermore, most Dometic RV toilets are compatible with round, elongated, and standard sizes – although it is advised to double-check the size of your Dometic toilet before making a purchase to be sure it is compatible with your chosen toilet seat.
In general, many standard toilet seats available on the market will fit Dometic RV toilets.
What is a Dometic toilet?
A Dometic toilet is a comfort toilet designed specifically for recreational vehicles (RVs) and mobile homes. It offers a powerful flushing system that is complemented by a deep bowl, meaning you don’t have to worry about water splashing, sloshing, and water spilling with each flush.
Dometic toilets offer a premium design, with high-grade materials and advanced engineering that ensures livability and reliability. They are easy to use, with a lever handle for easy flushing and the option to add a step pedal for those who prefer to use their foot.
The toilet also features an easy-to-clean and hygienic design, making it easy to keep clean and fresh while on the go. It also features a low-water consumption rating, which means you can keep your RV or mobile home running as efficiently as possible.
The sleek, modern design also makes it a great addition to any RV or mobile home, and you won’t have to worry about a full tank, thanks to the efficient water usage and plenty of holding capacity.