Skip to Content

How do I fix my shower drain?

Fixing a shower drain can be a tricky process. Depending on what the issue is, there are a few fixes you can do yourself.

If your drain is clogged, it’s best to start by using a plumber’s snake or auger to get out any debris. If this doesn’t work, you may have to try plunging the drain with a plunger. If the clog is still there, you can try using a chemical cleaner.

Make sure you follow the instructions on the bottle, as some chemicals can be damaging to the pipes.

If neither of these methods works, you may have to remove the drain cover and try clearing out the clog from the inside. Make sure you wear gloves and rinse the area with clean, hot water afterwards.

If you’re still having issues, you may need to call a plumber to inspect the pipes or replace them completely. Depending on the age of your shower or any potential damage, it may be necessary to remove and replace the entire drain.

Why did my shower drain stop working?

It could be a clog, caused by small pieces of debris, dirt and hair or an increase of soap scum, or it might be a mechanical issue due to a broken or clogged pipe or a mechanical malfunction, like an air lock.

It’s possible that the shower strainer or drain cover has become blocked, either by a solid object or by too much buildup of sediment. You may also need to check that the line isn’t blocked by a foreign object or build-up of dirt and/or soap scum.

If none of these issues are present, then the shower drain stopper may have become stuck in the closed position due to wear, age, or obstruction. It may be necessary to replace the stopper or ensure its mechanisms are free to open and close properly.

If all of these are clear, then the drain itself may be the culprit. Your drain could be too shallow, or the curve of the drainpipe could be causing the water to backup instead of flow towards the sewers.

If this is the case, a plumber will need to be called to re-adjust or replace the drainpipe. Finally, it’s also possible your drainage system may need to be cleaned out, or even replaced.

Why do I have standing water in my shower drain?

Standing water in a shower drain can be caused by a variety of factors. If the water is standing still, it could be due to a clog in the drain. A clog could be caused by hair, soap scum, or debris buildup.

It is also possible that the pipe is not sloped correctly or is too narrow, preventing the water from draining. Dirty or corroded pipes can also cause a slow drain. If your shower is older, the pipes may have worn down over time.

Additionally, the water pressure in your house may be too low to adequately drain the water. If the water is draining slowly, it is likely due to an obstruction or pipe obstruction due to age. It is also possible that the trap, which is the u-shaped portion of the pipe leading out of the drain, is clogged with debris or is missing entirely.

Lastly, a venting issue could be causing the water to back up and accumulate. If the vent pipe outside your house is blocked or damaged, airflow will be reduced and the water will not be able to flow freely.

What dissolves hair in a drain?

The main culprit that causes hair to clog your drain is soap scum, body oils, and hair. In order to dissolve hair in a drain, you should start by using a drain snake or plumbing auger to physically remove the hair from the drain.

If you can’t reach the hair with the snake, you can try using a chemical drain cleaner or boiling water to help dissolve the grime and hair clump.

Chemical drain cleaners usually contain sulfuric, hydrochloric, or sodium hydroxide that reacts with organic materials such as hair, grease, and soap scum to break them down into smaller pieces that will then be easily flushed down the drain.

They are certainly effective for dissolving hair, but they can damage your pipes and also emit dangerous fumes, so you might want to look for a more natural solution.

For a more natural solution, try pouring boiling water down the drain. This works best if you have a double kitchen sink where you can pour the hot water slowly into one side while allowing the cold water to run at the same time.

This will help break down the soap scum and flush out the hair clumps. You can also try adding some baking soda or vinegar to the boiling water to further help dissolve the hair clump.

By using a combination of these solutions, you should be able to dissolve hair in a drain and avoid any plumbing issues in the future.

Should I use silicone or plumbers putty for shower drain?

When it comes to deciding between silicone and plumbers putty for a shower drain, it ultimately depends on the specific task. Generally speaking though, silicone is best for sealing and waterproofing, while plumber’s putty is best used to create a secure, tight seal on stationary parts.

Silicone is best used for application on objects that are prone to movement, such as shower drains. It is also used in areas where a permanent water tight seal is important. As a general rule of thumb, use silicone sealant when connecting two dissimilar materials (e.

g. metal pipes to plastic drains). It can also be used in place of plumber’s putty when necessary, although it is not recommended.

Plumber’s putty is generally used when it is important to create a tight seal, usually on stationary parts that are exposed to water. For example, it can be used to attach a sink drain to the sink, sealing it in place.

Plumber’s putty is also often used to seal around shower drains and other plumbing fixtures. It is important to note that plumber’s putty should not be used for permanent seals, as it can dry out, crack and weaken over time.

In conclusion, it is important to consider the specific task at hand before deciding between silicone sealant and plumber’s putty. In general, silicone sealant is best used to connect two dissimilar materials and create a water tight seal, while plumber’s putty is best used to create a secure, tight seal on stationary parts.

What kind of sealant to use on shower drain?

When selecting a sealant to use on a shower drain, it is important to consider the type of installation and material of the drain, as well as choosing a sealant that is appropriate for the type of plumbing system you have.

For ABS plastic shower drains, the most commonly used sealant is an industrial grade silicone sealant. This type of sealant is resistant to water, mildew, and other elements that can damage the drain over time.

For metal drains, an epoxy sealant is generally the best choice. This type of sealant is also highly resistant to water, mildew, and other elements, and it works well to seal the drain, forming a long-lasting seal.

For both types of drains, it is important to follow the instructions on the sealant product packaging and to carefully follow all safety instructions, as some sealants can be dangerous if not handled properly.

Does a shower drain need caulking?

Yes, a shower drain should be properly caulked and sealed with a waterproof sealant. Caulking around a shower drain is essential to prevent water from seeping into the surrounding area and causing water damage.

It can also help to keep any unpleasant odors from escaping into the rest of the bathroom. Caulking is especially important if the drain is in a part of the bathroom that is frequently exposed to water, such as around a bathtub or shower area.

When applying a caulking substance, it is important to make sure that the entire circumference of the drain is properly sealed. Any gaps in the caulk can cause water to seep through and lead to water damage.

Where do you put plumbers putty in a shower drain?

Plumbers putty is used to create a water-tight seal around the drain on a shower or any other type of sink. It can be used for the top, or the underside of the sink. When putting it on the underside, the plumbers putty should be pushed around the nozzle or tubing to prevent water from seeping into the hole.

This can also be used to plug up any small holes or imperfections around the drain. On the top of the drain, the putty should be placed in the center and pressed down firmly to create a seal. Depending on the moisture in the area, it may take several hours before it is completely dry.

Once it is dry, the putty should be checked to make sure there are no gaps or holes. If there are, then more putty should be pus[ what the original did.

Can silicone be used for shower drain?

Yes, silicone can be used for a shower drain. Silicone is a very popular material for creating plumbing fixtures, as it is waterproof and highly durable. In addition, silicone is often used to create solutions to minor plumbing repair problems, such as a clogged drain.

Silicone is easy to clean and, with proper maintenance, can last for years. When used to create a shower drain, silicone is capable of creating a tight seal and prevent the water in the shower from leaking.

It is also important to note that silicone is flexible enough to work with many types of shower drains, including those with curved bottoms. When properly installed, silicone can be an efficient and long-lasting material for a shower drain.

Why use plumbers putty instead of silicone?

Plumbers Putty is a popular and useful tool for many plumbing purposes. It is ideal for most tasks involving watertight seals, such as connecting pipes and creating watertight seals around drains. It is easy to use and form, and it sets quickly.

Putty is a cost-effective alternative to silicone for many plumbing projects. Putty does not require special tools and does not require curing like silicone sealant does. It is also a non-toxic material, making it safe for use in aquatic environments.

Additionally, plumbers putty is less messy than silicone and can be applied in thicker amounts around particular areas where a tight seal is needed. By comparison, silicone is not as easy to form and is not suitable to use in aquatic environments.

It is also more expensive and can be difficult to clean up if not done correctly.

Where should you not use silicone caulk?

Silicone caulk is a versatile material that can be used for a variety of jobs, such as waterproofing and creating a watertight seal. However, even though it can be used almost anywhere, there are still some places where silicone caulk should not be used.

One place where silicone caulk should not be used is in areas where there will be direct contact with food. Silicone caulk should also be avoided in areas where it may come in contact with metal, because these surfaces can corrode or degrade the caulk over time.

Additionally, silicone caulk should not be used in areas where it can be exposed to extremely high or low temperatures, such as indoors near a stove or fireplace, as it can toughen or become brittle.

In other words, silicone caulk should not be used in areas where food or metal may come into contact, as well as areas exposed to extreme temperatures. In these cases, it’s best to opt for an alternative material that can withstand those temperatures or conditions.

Is there a special caulk for showers?

Yes, there is a special caulk for showers. This type of caulk is specifically designed to stand up to the moisture and heat found in a shower or bathtub area. It is important to use the right caulk in a shower or tub to ensure a watertight seal that will last for many years.

The best caulk for these areas is a silicone caulk because it is designed to resist mold growth and mildew, is highly durable, and is also easy to clean. This type of caulk can usually be found at most local home improvement stores.

It is also important to use a caulk that is specifically designed for use in a shower or tub area, as other types of caulk may not stand up to the wet environment. It is also important to use a caulk with a good elasticity so that it will not crack or break overtime due to shifts in the building or slight changes in the temperature.

Do I need to remove shower caulk before reapplying?

Yes, you definitely need to remove shower caulk before reapplying a new layer. This is because old caulk can become brittle and lose its effectiveness, so removing it and starting anew with a fresh layer will help ensure that your shower is properly sealed.

To remove the old caulk, use a putty knife or razor blade to scrape it away. You could also use a caulk remover, which can be purchased at most hardware stores. Once you’ve cleared away the old caulk, be sure to clean the surface with a mild detergent, then dry it before applying a new layer of caulk.

Can you replace a shower drain pipe?

Yes, it is possible to replace a shower drain pipe, although it is a bit of a difficult job that requires some plumbing knowledge and experience. In order to replace a shower drain pipe, you will need to disconnect the plumbing in the shower, remove the old pipe, clean up any debris and make sure that everything is clear.

Once the old pipe is removed, you will need to measure and cut the new pipe to size according to the space and fit it into place, making sure to use the proper seals and fittings. You will also need to attach the new pipe to the existing plumbing and check for any potential leaks or other issues.

This can be a challenging job, so if you don’t feel comfortable tackling it yourself, it’s best to call a professional plumber.

Are all shower drains same size?

No, not all shower drains are the same size. The size of a shower drain typically depends on the size of the shower itself, or the type of drain system that is being used. The standard size for a shower drain is 2 inches, but anything from 1 and a half to 4 inches is considered common.

For large showers, drains may be as large as 4 inches, and small showers may use a 1 and a half inch drain. Additionally, some shower drains come with multiple sizes, such as a 3-inch drain with a removable basket strainer for cleaning.

This can be especially helpful for larger showers that usually need larger drains. Ultimately, the size of a shower drain is dependent on the size of the shower drain and the type of shower drain being used.