Skip to Content

How do I know the size of my bathtub?

To determine the size of your bathtub or shower, you should measure the length, width, and height of the tub or shower. A standard-sized bathtub is typically 60 inches (152 cm) long by 30 inches (76 cm) wide, with a depth of 14-20 inches (35-50 cm).

However, tubs can come in a variety of sizes, so it is important to measure yours before making any purchase decisions. To measure the length and width, measure along the longest and widest parts of the tub and record the measurements to the nearest inch or centimeter.

To measure the height, measure along the walls at the highest point of the tub and again take the measurements to the nearest inch or centimeter. From these measurements, you should be able to determine the size of your bathtub or shower.

What is the actual size of a 60 inch bathtub?

The actual size of a 60 inch bathtub will depend on the make and model of the the tub. Generally, a 60 inch tub is usually between 5 feet to 6 feet long and between 2 feet to 3 feet wide. The actual height of the tub is usually around 17 to 22 inches above the floor.

The side and back walls of a typical 60 inch tub are usually around 6 to 8 inches high. Additionally, the depth of the tub is roughly 15 to 20 inches. The actual dimensions can vary based on the model of the tub and the manufacturer.

Are all bath tubs a standard size?

No, not all bath tubs are a standard size. Bath tubs come in a variety of sizes, ranging from small corner tubs to extra-large soaking tubs. Corner tubs are typically smaller than the standard tub and usually measure around 54” by 54”.

Standard tubs usually measure 60” by 30”, while large corner tubs can run up to 72” by 72”. Freestanding tubs tend to be larger than the standard size, usually ranging between 66” and 72” in length, while drop-in and alcove tubs are smaller, typically measuring around 60” in length.

It’s important to check the measurements of the bathtub you’re interested in to make sure it will fit in the space you have planned for it.

Are tubs measured from the inside or outside?

Tubs are typically measured from the outside, meaning that the listed width, length, and depth of the tub will measure the external dimensions of the tub. On some tub models, the manufacturer or reseller may also list the internal dimensions of the tub as well.

This internal dimension measurement is useful for knowing how much room people inside the tub have for personal space.

How do you measure a bathtub for replacement?

Measuring a bathtub for replacement involves taking several measurements to make sure the new tub will fit the space of the old one.

First, measure the length of the tub, from one outside corner to the other. This is the important measurement for determining the size of the new tub.

Next, measure the width from wall to wall at the widest points of the tub. This is important to make sure the new tub will fit the space allotted.

Finally, measure the height from the floor to the top of the rim. This helps determine if the new tub will fit in the space when installed and allow for proper head space for the bather.

All of these measurements should be taken twice to make sure the numbers are accurate and then noted in a place that can be referred to when you go to purchase the replacement bathtub. With these measurements, you can now confidently select a bathtub that fits the space properly.

Can you replace just a bathtub?

Yes, it is possible to replace the bathtub without replacing the entire bathroom. It is typically more cost-effective to replace just the bathtub in order to achieve the desired look. Depending on the condition of the existing fixture, removal and replacement of the existing bathtub may require some minor adjustments as well.

A basic bathtub replacement consists of most of the following steps: 1) shutting down the power and water to the bathroom, 2) removing any existing pieces such as bath surrounds, wall tiles, and the existing bathtub, 3) inspecting the existing wall and floor framing to amount of work needed to properly support the new bathtub, 4) properly securing the bathtub, 5) trimming and installing new wall tiles, and 6) replacing any necessary plumbing connections and finishing off the project with sealants, caulk, and grout.

Keep in mind, bathtub replacement can vary greatly depending on the condition of the existing bathroom and the size and weight of the bathtub being installed. Therefore, if the replacement is a part of a larger remodeling project, it is always best to consult with a professional to help you with the installation.

Is a 60 inch tub really 60 inches?

Generally, yes, a 60-inch tub is actually 60 inches in length. However, it is important to note that the dimensions of a tub can vary slightly, depending on the specific model. Additionally, many tubs have a lip or edge which extends beyond the base of the tub.

This is often 1-4 inches for the lip, so when taking into account the lip, a 60-inch tub may actually measure 61-64 inches. For this reason, it is important to check the exact size of a tub before making a purchase.

In addition, some tubs come without faucet holes, so these must be drilled which could add several inches to the overall length of the tub.

Are all tubs the same width?

No, not all tubs are the same width. The width of a tub depends upon the type of tub and the manufacturer. For example, alcove bathtubs are a rectangular shape and typically measure 32 to 34 inches wide.

Drop-in or platform style bathtubs, which sit on a platform or in a pre-constructed area usually measure between 54-60 inches. Corner style tubs are also rectangular and measure between 60-72 inches on each side.

Clawfoot tubs range between 52-72 inches wide. The width of a tub also depends on the size of the manufacturer. For instance, a single person alcove bathtub may be 30-32″ wide, while an alcove bathtub designed to fit two people may be up to 35″ wide.

Furthermore, many manufacturers will also offer customizable widths in certain models to fit any space and desired size.

How do you measure for a replacement tub and shower surround?

When measuring for a replacement tub and shower surround, it is important to take precise measurements to ensure you purchase the correct parts for your project. First, measure length and width from the tub deck to wall at the widest point – make sure to measure from the back of the tub, not the front.

Next, carefully measure the distance from the top of the tub to the finished floor level. You’ll also need to measure the width of the space between the studs. This will allow you to select the appropriate size tub and surround.

If you have an alcove tub/shower, you’ll need to measure the distance from one vertical wall to the other. Make sure to measure inside the flanges of the tub, taking into account any tile that may hang over the flanges and the screw holes.

Once you have these measurements, you’ll know the size of the alcove surround that you need. Also, measure the height of the alcove.

On occasion, the width of the flanges may alter the size of the tub or surround that you can use. As a result, it is important to measure several times to ensure you purchase the correct size. Additionally, measure the width of the space between the studs, as you will need to match the width of the panels and/or wall-liner or tile that will be installed.

What are the 4 types of baths?

The four types of baths are:

1. Tub Bath: This type of bath involves immersing one’s self in a full-sized bathtub filled with water. This type of bath is used the most by those who take baths.

2. Shower Bath: Unlike the tub bath, a shower bath requires no water to be filled into a tub. This type of bath involves standing directly under running water, usually from a shower head.

3. Foot Bath: Foot baths are used as a way to clean and soothe the feet. This type of bath involves filling a bowl or basin with water and soaking one’s feet in it.

4. Sitz Bath: Sitz baths are a type of tub bath, but instead of lying in a full-sized tub of water, the user sits in a sitting position. This type of bath is often used after childbirth, when the user needs to relax but is not comfortable lying down.

Do I have a porcelain or enamel tub?

In order to determine whether you have a porcelain or an enamel tub, you will need to inspect it closely. Porcelain enamel tubs are easily identifiable because they are very smooth and glossy. The surface is usually uniform in color and does not have any blemishes or cracks.

Porcelain enamel is also more resistant to scratches, chips and dents. On the other hand, enamel tubs have a coarser, more textured surface and are typically more porous. They may have rough patches and small bubbled areas, as well as color variations.

It can also be more prone to staining and discoloration. In order to identify which type of tub you have, look for these distinguishing characteristics and you should be able to tell them apart with ease.

How do I know if my bathtub is acrylic or fiberglass?

If you’re not sure whether your bathtub is made from acrylic or fiberglass, there are a few ways you can determine this. First, you can examine the surface of the bathtub. Acrylic surfaces tend to be smoother, while fiberglass tubs may have a slightly bumpy or textured surface.

Second, a magnet can be used to tell the difference. Acrylic is not magnetic, while fiberglass is, so running a magnet over the surface of the bathtub can give you an answer. Third, you can also remove the drain plug and take a look at the underside of the bathtub, where you can look for pen marks which are often used to denote the type of material the tub is made from.

If you still aren’t sure, you can always contact a plumber or knowledgeable person who can provide a professional opinion.

Do acrylic bathtubs crack easily?

No, acrylic bathtubs do not crack easily. Acrylic is a durable material that is typically very resistant to cracking. Unlike cast iron and other traditional bathtub materials, acrylic can flex slightly without cracking and is generally more resistant to extreme temperature changes.

The acrylic material offers a more comfortable bathing experience and is substantially lighter in weight, making it much easier to install and transport. Acrylic bathtubs are also easy to maintain and clean, since their surface seal is non-porous and resistant to the growth of bacteria, mildew, and mold.

However, it is important to be careful when cleaning or handling your acrylic bathtub as it can be scratched if not properly cared for. In order to prevent cracking, it is important to make sure that you install the bathtub correctly, fill and drain it properly, and take proper measures to avoid bumps or sharp objects near or in the bathtub.

Will bleach damage fiberglass tub?

Yes, bleach can damage fiberglass tubs. Bleach is a strong chemical, and when used on a fiberglass tub, can create a dull and pitted finish that can not be repaired. Bleach is also corrosive, which can damage your fiberglass tub’s finish, making it look worn and faded over time.

Additionally, bleach can alter the color of fiberglass tubs, causing them to look discolored along with developing cracks and chips. If you must use bleach as a cleaner on your fiberglass tub, you should use it sparingly and dilute it with water to reduce its strength.

Additionally, avoid using abrasive sponges when cleaning your tub with bleach; instead, opt for soft sponges or use a cloth. After using bleach on your tub, it is important to rinse it thoroughly with water to make sure there is no remaining residue that could damage the surface.

Is scrubbing bubbles safe for acrylic tubs?

Yes, scrubbing bubbles is safe to use on acrylic tubs and showers as long as you only use them in accordance with the manufacturer’s instructions. Always use a mild detergent that is designed and labeled as safe for acrylic surfaces and never use abrasive, harsh cleaning agents.

When cleaning, scrub gently and spray from the bottom up in order to avoid pooling. Additionally, any scours, steel wool pads, or chemicals that contain chlorine such as bleach should be avoided as these will damage acrylic and cause discoloration.

Finally, after cleaning, rinse your tub with clean water and then dry the surface to remove any surface cleaner residue.