Skip to Content

How do I know what Broan range hood I have?

To determine the type of Broan range hood you have, the best way is to check the model number. This can usually be found on the underside, side panels, or inside of the range hood. The model number should have the letters “BR” at the beginning, followed by a three-digit code.

Knowing this number can allow you to look up what type of range hood you have as well as access helpful manuals and other resources from Broan. Additionally, you may be able to obtain access to parts catalogs and other helpful information related to your specific model.

Once you have the model number, you may also be able to contact a local appliance store or a supportive customer service from Broan to help identify the type of range hood you have.

How do I find my Broan model?

To find your Broan model, you’ll need to locate your product identification label. This label is typically found on the interior of the product or, if the product is installed, behind the appliance or product grille.

Once you locate the label, it will have a series of numbers and letters. This combination of numbers and letters is your model number.

You can also use the Broan website to find your model. Navigate to their Model Number Lookup page from their website, enter your series of numbers and letters, and select the appropriate category (e.

g. ventilation, range hoods). The website will then generate a list of Broan models that match your input.

Keep in mind, if you are unable to locate your product identification label, you can also refer to your product’s use and care manual or installation instructions as they may contain information regarding the model.

Where is the model number on my Broan range hood?

The model number of your Broan Range Hood can typically be found on the inside of the hood, near the plastic motor cover, on a label that also contains the serial number. To access the motor cover, you will typically need to use a screwdriver to loosen the screws that are holding it in place.

Once you have removed the cover, locate the label and you should find the model number written on it. You may also find the model number printed on the exterior of the range hood, usually on the underside near the blower connection.

Is NuTone and Broan the same thing?

No, NuTone and Broan are not the same thing. NuTone is a subsidiary of Nortek, Inc. , and is focused on providing residential communication and home comfort solutions. Broan is a leading manufacturer of residential ventilation products, attractive lighting fixtures, and the iconic range hood.

While both companies are industry leaders in providing innovative solutions for residential needs, they specialize in different areas. NuTone offers Intercom, Door Chime, Video Intercom, Central Vacuum, Range Hoods, Whole-house Fans and Bath Fans, Home Automation audio solutions, as well as security solutions and energy solutions.

On the other hand, Broan provides a wide range of products, from range hoods, bath fans, and heaters to lighting products, control systems, central vacuums and wall heaters.

How old is my Broan?

Without more information it is not possible to accurately answer this question. If you are asking about a particular Broan product, then the age of the product would depend on when the model was released.

You can usually find the release date of a product by looking at the model number or contacting the manufacturer for more information. If you are asking about a person named Broan, then the age could be determined by checking their birth certificate or other official documents.

Does Broan make range hoods?

Yes, Broan does make range hoods. They offer a wide selection of range hood options in various styles so you can find one that fits your kitchen perfectly. Their range hoods are designed for powerful performance, efficient ventilation and easy installation.

They also offer a wide range of features to suit your needs, including models with adjustable lights and fans, easy-to-clean filters, and intuitive controls. Whether you need a basic vent hood or an upscale model, Broan has you covered.

How do I remove the cover from my Broan exhaust fan?

Removing the cover from your Broan exhaust fan is fairly simple and straightforward. First, locate and remove any screws used to attach the cover to the fan housing near the ceiling. If any screws remain in the fan housing, remove those as well.

Next, locate the main cover screws on either side of the cover, near the top of the fan. Unscrew these to free the cover from the fan. You may need to hold the cover in place with one hand while you unscrew the main cover screws with another.

Once the main cover screws have been removed, carefully lift off the cover from the fan housing. If necessary, you may need to wiggle the cover slightly to dislodge it. To ensure that there is no damage to the fan or the wiring when removing the cover, don’t pull off the cover with excessive force.

Finally, double check to make sure there are no other screws still attached to the fan housing or the cover before replacing it with a new one.

How do you read a Broan date code?

Broan date codes are made up of three numbers separated with a slash. The first number in the date code indicates the year it was manufactured. For example, a code of 6/16/7 indicates that the product was manufactured in 2006.

The second number in the date code indicates the month. For example, a code of 2/17/5 indicates that the product was manufactured in February. The third number in the date code indicates the day of the month the product was manufactured.

For example, a code of 9/5/2 indicates that the product was manufactured on the second day of the month (September 5th).

Is NuTone the same as Broan?

No, NuTone and Broan are not the same. While both are companies that specialize in ventilation and other home products, NuTone is owned by Nortek, Inc. , and Broan is owned by Milwaukee-based company, The Bertazzoni Group.

Additionally, each brand has different product offerings. NuTone products include ventilation fans, range hoods, heating, central vacuum systems, door chimes, ventilation products, and accessories. Broan’s product lineup includes range hoods, air quality products, bathroom fans, attic ventilation systems, home security and ventilation, plus various other products.

Finally, NuTone and Broan have different warranties and levels of customer service so depending on the job, you may find one to be a better fit.

Is Broan now NuTone?

Yes, Broan is now NuTone. The company began as Broan Manufacturing Company in 1932, following the transformation of a small family-owned plumbing business. In 1982, Broan-NuTone LLC was established, and then in 2018, Broan was acquired by Nortek Inc.

, and transformed into NuTone. This was done in order to develop innovative solutions for ventilation and indoor air quality. NuTone strives to provide high-performance, quality ventilation and indoor air quality solutions to its customers.

NuTone’s products range from residential built-in models to engineered commercial products. NuTone products provide energy savings, advanced engineering and long-life components, as well as superior performance.

How do I change the lightbulb in my round Broan bathroom fan?

To change the lightbulb in a round Broan bathroom fan, you’ll need a step ladder, the appropriate replacement bulb, and a screwdriver. Here is a quick guide on how to replace the bulb.

Step 1: Locate the Light Bulb. Before you start changing the bulb, locate the light bulb in the fan. It is usually located in the top center of the fan cover.

Step 2: Turn Off the Power. Make sure to turn off the power to the fan by either turning off the circuit breaker or unplugging the fan from the electrical outlet.

Step 3: Remove the Fan Cover. Use a screwdriver to remove the screws that are holding the fan cover in place on the fan housing. Once the screws are removed, you can lift the cover off of the fan.

Step 4: Remove the Bulb. Carefully grip the bulb, turn it counterclockwise, and then remove it from the socket.

Step 5: Install New Bulb. Place the new bulb into the socket and turn it clockwise until it is snug.

Step 6: Reattach Fan Cover. Place the fan cover back onto the fan housing and securely fasten it by putting the screws back in place.

Step 7: Turn On Power. Turn the power back on to the fan. The light should now be working with the new bulb in place.

Who makes Broan products?

Broan is a company that has been manufacturing ventilation systems and residential heating, cooling, and air quality products for over 80 years. The company was founded in 1932 under the name The Broan Manufacturing Company and began producing range hoods, electric heating systems, and electric fans.

In 1965, the company changed its name to Broan-NuTone, Inc. and began producing air purifiers, electric heaters, attic fans, and bathroom ventilation systems. Today, Broan-NuTone is renowned as a North American leader in the residential ventilation market, offering one-stop exhaust ventilation solutions as well as air quality and heating & cooling products for remodeling and new construction.

Broan-NuTone also manufactures a variety of products under the Broan, NuTone, and BEST brands, including kitchen fans, bathroom fans, exhaust fans, range hoods, bath accessories, heaters, heat recovery ventilators, central vacuums, doorbells, and intercom systems.

Who manufactures Broan?

Broan is a brand by Nortek Global HVAC, a part of the Nortek Air Solutions family of brands. Nortek Global HVAC is a global leader in the development, manufacture and sale of HVAC products, including furnaces, air handlers, air conditioners, ventilators, and heat pumps.

Broan products include residential and commercial fans, residential and commercial range hoods, heaters, and various other related items. Broan also sells ventilation products used in remodeling and new construction, such as kitchen fans, bathroom fans, and system components.

They also manufacture bath and heating products. The company has always been dedicated to improving indoor air quality by providing products that are trustworthy and reliable.

What does Broan-NuTone do?

Broan-NuTone is a leading manufacturer that offers a broad selection of custom-designed products for improved home living. They provide ventilation fans, range hoods, bath and exhaust fans, countertop units, thermostats, water heaters, home environmental solutions, and more.

Their products are designed to provide comfort, convenience, and a safe, healthy home. Their indoor air quality solutions help reduce allergies, breathing disorders, and other asthma-related illnesses.

They also offer energy efficient solutions that reduce energy costs and promote sustainability.

Their products are designed for easy installation, with many systems designed for DIY installation to save time and money. Their products also come with detailed instructions for installation and use.

The company offers a wide range of products for both residential and commercial applications. Their products are designed for use in the kitchen, bathroom, laundry room, bedroom, garage, and basement.

Many of their products come with a limited lifetime warranty.

In addition to their range of products, Broan-NuTone also provides online support and resources to help customers make informed decisions. They provide product literature, videos, warranty registration, and installation instructions.

They also offer product replacement parts if necessary.

How do you remove an old NuTone bathroom fan housing?

Removing an old NuTone bathroom fan housing is a fairly straightforward process, but it should be done carefully in order to avoid damaging other parts of the bathroom. Before beginning, make sure the power to the fan motor is turned off.

To begin, use a screwdriver to remove the screws that hold the fan housing in place. Once the screws are removed, carefully pull the fan housing away from the ceiling, taking care not to damage the housing or any of the other components around it.

Once the fan housing is detached from the ceiling, inspect the wiring to make sure there is no electrical damage and that the correct type of wire is being used.

Once the wiring is checked, you can take the old fan housing and separate it into its component pieces. You may want to wear gloves to do this, as the components may be dusty and dirty. Once the fan housing has been taken apart, you can remove the old fan motor and old fan parts.

Be sure to dispose of them properly, as some of the older fan parts may contain hazardous materials.

Finally, install the new fan housing and fan parts, hook up the wires, attach the fan housing to the ceiling, and then turn the power back on. Once the fan is running, test it by turning it on and off several times to ensure that the installation has been done correctly.