Skip to Content

How do you change a toilet seat on an enclosed toilet?

Changing a toilet seat on an enclosed toilet depends on the type and brand of the toilet. Most closed-front toilet seats attach with bolts and nuts, which can be removed by using a wrench or pliers. Additionally, some toilet seats may be designed with an attachment loop or shank that can be removed with a screwdriver and some have a press/push and release mechanism.

Once you have identified the type of toilet and removed the old seat, you can install the new seat following the manufacturer’s instructions. When installing the new seat, use the same bolts, wingnuts and/or mounting hardware that came with the toilet seat, or appropriate replacements of the same size and type.

When necessary, apply plumber’s tape to the bolt threads before attaching the seat and installing the wingnuts. If the toilet seat has a press/push and release mechanism, make sure the seat is pressed into the mounting bracket securely to ensure a secure and stable connection.

Finally, when the seat has been installed, check the seat periodically to make sure it has been installed correctly and that the connection is secure. If you notice any loose connection or instability, tighten the bolts and wingnuts then check the connection again.

How do you tighten a toilet seat with no access underside?

To tighten a toilet seat with no access underside, you will need to remove the seat from the toilet before you can access the bolts that secure it to the bowl. First, make sure the plastic nuts on either side of the seat are loose.

These nuts may require a specialized tool, but often a pair of pliers will work. Then, use the appropriate size wrench or screwdriver to turn each bolt clockwise to secure it. You may need to turn the bolts multiple times and use a little force to ensure an even tightness around the toilet bowl.

Once everything is tightened, test the seat to make sure it is secure. Finally, reinstall the plastic nuts that hold the seat to the toilet bowl and make sure they are snug. You may need to apply a bit of Vaseline or similar lubricant to ensure the nuts latch onto the bolts correctly.

How do I adjust my enclosed toilet seat?

To adjust your enclosed toilet seat, you’ll need to start by loosening the screws at the back of the seat. The type of screws used to secure the seat in place can vary, so you may need a Phillips head or flathead screwdriver, depending on the model.

Once you have the screws loose, you’ll be able to easily lift the seat up and move it to the desired position. Depending on how tight the screws were initially, you may need to adjust them to secure the seat firmly in place.

Be sure you don’t overtighten the screws, as this can cause damage to the toilet seat. Once you have the seat adjusted to your liking, firmly tighten the screws and you’re done!.

What is the difference between soft close and slow close toilet seats?

The primary difference between a soft close and slow close toilet seat is in the way the lid and seat close. Soft close toilet seats have a hydraulic system that allows the lid and seat to close gently and smoothly.

This is particularly advantageous in avoiding loud noises or slamming–without even needing to touch the lid or seat. Slow close toilet seats, on the other hand, are made of flexible polypropylene. The flexible material and hinges allow the seat to close slowly and quietly.

Additionally, slow close seats provide some protection for children’s fingers due to the dampening effect caused by the flexible material.

Do soft close toilet seats fit all toilets?

No, unfortunately not. Soft close toilet seats don’t always fit all toilets. It’s important to measure to ensure that the size and shape of the toilet seat will fit your specific toilet. Soft close toilet seats come in a variety of shapes, such as round and elongated, and sizes to fit the majority of toilets.

However, if your commode is particularly small, especially if it is an old-fashioned, small-style toilet, it may not accept a soft close toilet seat. Additionally, if your toilet sits at an angle where the bowl is wider at the back than at the front, a soft close seat may not sit level in the bowl and could result in leakage.

It’s always best to measure your toilet to make sure the dimensions are compatible with a soft close toilet seat before purchasing.

What is the most comfortable toilet to sit on?

The most comfortable toilet to sit on will depend on personal preference, body type, and budget. Generally, the most comfortable type of toilet is a round-front, two-piece model with a taller bowl and an elongated shape that provides added comfort and support.

Such a design allows you to sit more naturally and will help to alleviate pressure on your legs.

The type of materials used to construct a toilet also has an impact on comfort. Toilets made of vitreous china, a type of high-temperature fired clay, are typically the most comfortable and gentle on your skin.

Other materials — such as plastic and metal — can also provide comfort, but may not be as gentle.

You should also consider a toilet’s design features, such as adding a bidet sprayer, adjustable height, soft-close lids, and heated seats, which all contribute to added comfort. Most of these features come with a higher price tag, but the increased comfort and convenience they provide may be worth the investment.

What are the two types of toilet seats?

There are two main types of toilet seats: round and elongated. Round toilet seats are more compact and typically more affordable than their elongated counterparts, making them ideal for tight spaces or bathrooms with a minimalist design.

They measure approximately 16 inches from the center of the bowl to the front of the seat, while elongated seats are approximately 18 inches in length. Elongated seats feature a rounded front design that extends out further than round seats, making them more comfortable for larger individuals.

Elongated seats may also take up more space in the bathroom and can be more expensive than round seats.

What is a skirted toilet seat?

A skirted toilet seat is a type of toilet seat that features a smooth, continuous surface from the top of the seat all the way down to the floor. This type of seat eliminates all the hard edges and crevices that can collect dirt and bacteria, making the bathroom much easier to clean and keep sanitary.

Skirted toilet seats are speciality products, and are more expensive than traditional designs. They are often made with a poly resin material, which helps to prevent staining, scratching and cracking.

Some skirted toilet seats even come equipped with a slow close technology, which helps to prevent slamming and loud noises in the bathroom. Skirted toilet seats are designed to blend in with the bathroom decor to provide a more streamlined, modern look.

What does it mean when a toilet is skirted?

When a toilet is skirted, it means that the base of the toilet has a raised panel that extends from the base of the toilet straight down the wall to the floor. This panel covers the name and model of the toilet, as well as any pipes protruding from the wall.

Skirted toilets provide a more seamless look in bathrooms, as the base no longer sticks out, creating a cleaner and more modern look. It also helps to hide any unsightly water connections, making it easier to match your toilet to other fixtures in the bathroom.

Why does my toilet seat keeps loosening?

The most likely cause is that the screws which hold the seat in place are loose and need to be tightened. Over time, the screws can lose their grip, causing the toilet seat to feel unstable. The screws may have been installed improperly, or the nuts may be worn out from frequent adjusting.

The other possibility is that the toilet seat hinge is loose, which can cause the toilet seat to wobble or even come off completely. It is also possible that the toilet seat is old and the materials have become worn down, making it more difficult for the seat to remain tight.

To fix the issue, make sure to check the screws and hinges for signs of wear and then either tighten or replace them if needed.

Is there a tool for tightening toilet seats?

Yes, there are several tools available for tightening toilet seats. These include wrenches, screwdrivers, Allen wrenches, and adjustable wrenches. Wrenches are best suited for standard toilet seats with metal bolts, whereas screwdrivers and Allen wrenches are more helpful for plastic bolts.

An adjustable wrench is the most versatile option as it can fit both metal and plastic bolts. To tighten the seat, turn the nut clockwise with the applicable tool. It’s important to not over-tighten the bolt as it can cause damage.

The seat should be firmly tightened but not overly tight. Additionally, consider using thread-locker products prior to tightening the bolt to secure the seat in place and prevent any further loosening.

Why wont the screws on my toilet seat tighten?

First, you need to make sure that the screws are the correct size and length. If you have the wrong size or length, they won’t fit properly and won’t tighten properly. Additionally, if your toilet seat is plastic, then make sure that you’re using plastic screws – metal screws will not tighten into plastic.

Next, you need to check that the screws are actually making contact with the seat. If the holes in the seat are too deep, then the screws will not be able to get a good grip and won’t be able to hold tight when you try to tighten them.

You may need to use a longer screw to get a good grip.

Finally, if the screws are the right size and do fit properly, then you may need to replace the screws. If the screws are old and rusty, they won’t be able to grip properly, and they won’t be able to tighten.

If you are able to get new screws, they should fit and tighten properly.

How do you fix a screw hole that won’t tighten?

If you have a screw hole that won’t tighten, there are several possible solutions, depending on the type of material you are working with.

If the screw is in wood, you may be able to insert a filler such as wood putty into the hole and allow it to dry, then drill a new pilot hole and screw into it. This should provide extra security, as the wood putty has a tendency to grip onto the wood, creating a tighter bond.

If the screw is in metal or plastic, one way to fix the issue is to apply thread tape or thread sealant to the threads on the screw before inserting it into the hole. Thread tape and sealant fill in any microscopic gaps that may be present, giving the screw a more secure grip in the hole.

If all else fails, it may also be possible to essentially re-tap the hole (depending on the type of material) so that the threads are smooth, allowing for a tighter grip.

No matter what type of material you’re dealing with, you should take caution when attempting to fix a screw hole that won’t tighten. If done wrong, it could cause damage to the material or lead to other issues.

In any event, it is best to consult with a professional who is experienced in working with the respective material before attempting anything drastic.

How can I make my toilet seat tighter?

One way to make your toilet seat tighter is to adjust the bolts securing the toilet seat beneath it. In most cases, your toilet seat should have two bolts located beneath it, which can be accessed either by turning the toilet seat over, or by looking through the access holes in the back of the toilet bowl.

Use a flathead screwdriver or an adjustable wrench to tighten the nuts around the bolts until the toilet seat feels securely attached. If the current bolts are too loose, you may also want to consider replacing them with longer bolts from a hardware store.

Additionally, you can purchase secure toilet seat fasteners, which attach to the bolts and tighten the toilet seat. Finally, some toilet seat models feature adjustable hinges on the back of the seat, allowing them to be securely tightened to the bowl more exactly.

How do I stop my toilet seat from moving sideways?

The best way to keep your toilet seat from moving sideways is to invest in a set of toilet seat anchors. These are plastic or metal parts that fit between your toilet bowl and the underside of the seat.

Once installed, they prevent the seat from sliding, while still allowing you to easily remove it when needed. To install a set of toilet seat anchors, you might need a screwdriver and an adjustable wrench.

Unscrew the bolts that connect the seat to the bowl, then slide the anchors into place from below and re-tighten the bolts. Alternatively, you can use adhesive tape on the bowl, or purchase a set of non-slip seat adhesive strips to attach to the underside for a temporary solution.