Skip to Content

How do you change an old toilet to a new one?

Changing an old toilet to a new one is a relatively easy job that most homeowners can do without professional help. You will need some basic tools such as a screwdriver, a wrench, a new toilet, a coupling device, and Teflon tape.

First, shut off the water supply and disconnect the water line from the toilet tank. Flush the toilet to empty out all the remaining water, then unscrew the tank from the bowl and remove the toilet from the floor.

Next, determine the location of the closet bolts and take out the old flange as well as any grime and debris that’s accumulated under the toilet. Clean up the area and check the floor for any weak spots.

Following that, install the new flange according to manufacturer instructions. Place the new toilet on top of the flange and ensure it’s properly aligned with the wall. Reinstall the closet bolts and coupling device.

Also, place the Teflon tape around the threads of the coupling device to ensure a good seal.

Next, secure the toilet tank to the bowl and connect it to the waterline. Reconnect the water supply and open the shutoff valve to allow water to flow into the tank. Finally, test the flush. Check for any leaks or any cracks that may have arisen after installation.

If everything looks and functions properly, your old toilet is now replaced with a new one.

Do all toilets fit the same?

No, not all toilets fit the same. Toilets come in a variety of sizes, shapes, colors and styles. The size of the toilet bowl and the shape of the tank are the two most important factors when it comes to determining whether or not a toilet will fit in a given space.

In general, the standard size of toilet bowls range from 12 to 14 inches in length and between 8 to 11 inches in width which is known as the “rough in” measurement. Additionally, toilet tanks come in several shapes that may be round, square, or elongated.

The shape of the toilet you choose should depend on the size, dimension and space of the room you’re installing it in. Additionally, you will need to be aware of clearance space, which is the distance from the back wall to the center of the rear toilet bolts and ensure that the toilet you select allows for sufficient clearance.

If a certain toilet does not fit into your space, be sure to measure your space accurately and check with your local hardware store for advice about what model and size of toilet is suitable for your space.

How long does it take to take an old toilet out and put a new one in?

It typically takes two to three hours to take an old toilet out and put a new one in. The amount of time does depend on a few variables, however. If the old toilet is hard to access or stuck due to rust, for example, it could take longer.

Generally, the process consists of turning off the water supply, draining the tank and bowl, and then removing the old toilet by taking out the anchor bolts and disconnecting the water supply line. You then have to prepare the floor or base area as needed, set the new toilet, attach the wax ring, install the new bolts and nuts, attach the water supply line, and finally, turn on the water before testing the flush and ensuring the water is filling properly.

Depending on the complexity of the installation, it can be a time consuming job.

What do I need to know about replacing a toilet?

Replacing a toilet is not a job for a beginner. Unless equipped with the right tools and precise knowledge, it can be difficult and time-consuming. To successfully replace a toilet, the following steps should generally be taken:

1. Turn off the water supply. There’s a shut-off valve connected to the water line which feeds the toilet tank. Turn it off to stop the water flow.

2. Drain the tank. This will allow you to remove the tank without having to worry about spills. Consider using a garden hose to drain the water directly into a nearby drain or into a bucket.

3. Remove the old toilet. Disconnect the water supply line and flush mechanism. Bolt caps and other fasteners should be unscrewed from the wall and flange. Once disconnected, the toilet can be lifted off the flange.

4. Install the new toilet. Place the new toilet over the flange, making sure the seal created by the wax gasket is properly sealed. Align the toilet so it is even with the surrounding tile, if applicable.

Connect the water supply line and flush hardware, ensuring the connections are secure.

5. Test the toilet. Pour water into the tank until the water reaches the overflow tube. Flush the toilet and make sure the water runs off properly. Replace the tank lid and bolts, turn the water on and test the toilet again.

Is it worth it to replace old toilet?

It depends on the age of your toilet and the extent of the damage. In general, it’s worth replacing a toilet if it’s over 10 years old and/or if it needs frequent repairs. A new toilet will use less water, work more quietly and effectively, and look better.

Additionally, a new toilet can improve the overall look of your bathroom and increase the value of your home. If you attempt to repair the toilet on your own, you may end up spending more money on parts and labor than what it would cost to install a new toilet.

Therefore, it may be more cost-effective to purchase a new toilet in the long-run.

Can I change my toilet myself?

Yes, it is possible to change a toilet yourself, although it is not always recommended. There are some basic steps that should be followed in order to ensure the job is done properly. First, turn off the water supply to the toilet, then flush the toilet to empty the tank.

Next, remove the nuts and bolts which hold the toilet to the floor, and then carefully lift the toilet off the floor. Once the old toilet is removed, you can begin to install the new toilet. Place the new toilet in the proper position and make sure it is level.

Reattach the toilet to the floor with the nuts and bolts and make sure it is securely fastened. Reconnect the water supply to the toilet, then check to make sure there are no leaks. Turn the water supply back on and flush the toilet to fill the tank.

Finally, replace the lid and seat of the new toilet and you are finished. Although it is possible to change a toilet yourself, it is often recommended that a professional plumber be called if you are unsure of any of the steps.

Should I replace 30 year old toilet?

Replacing a 30-year-old toilet is usually a personal decision, as there are pros and cons for both replacing and not replacing the toilet. On the one hand, replacing a toilet that is 30 years old will mean that you are investing in a more modern and efficient toilet that uses less water and has a style that is more updated to modern trends.

Additionally, a new toilet could come with a warranty that could save you money in the long run on potential repairs.

On the other hand, leaving the toilet in place could save you money in the short run. Replacing a toilet is an expensive upfront investment, and if the toilet is still in decent condition and works, the money saved in not having to replace it may be more than the savings of a new, more efficient toilet.

Additionally, if the toilet has sentimental value to you or is part of the original style of your home, keeping it in place allows you to maintain the style of your home.

In the end, whether or not you choose to replace your 30 year old toilet is a personal decision. It’s important to weigh both the pros and cons and decide what will be right for your home and budget.

What is a fair price for replacing a toilet?

The cost of replacing a toilet depends on the materials and features you decide to buy. Typically, you can expect to pay anywhere from $100 to $500 for a new standard toilet. If you would like a more luxurious model with advanced features, such as a heated seat or hands-free flushing, you can expect to pay $500 to $800 or more.

Additionally, other factors such as the labor cost, cost of delivery, permit fees, and cost of debris removal, can also affect the overall cost of replacing a toilet.

How often should you replace a toilet in your home?

When it comes to replacing a toilet in your home, the frequency will vary based on the age and condition of your current toilet. On average, toilets can last anywhere from 10-20 years. However, if you start to notice any cracks, leaking issues, or general wear and tear on your toilet, it would be wise to consider replacing it sooner.

If a leak is found around the base of the toilet, this is a sign that the wax seal has failed and it is likely time to replace the toilet. Additionally, if you start to hear strange gurgling or humming noises coming from the toilet, this is usually an indication that the existing toilet has an issue with its flushing ability that requires a replacement.

As a general rule it is a good idea to have a plumber inspect your toilet at least once every five years so that any issues can be identified and addressed accordingly.

How much does Home Depot charge for installing a toilet?

The exact cost of a toilet installation at Home Depot depends on the type and brand of toilet chosen, as well as whether or not you are installing yourself or hiring a licensed and insured professional technician.

Most toilet installations with Home Depot will include the cost of the toilet and the installation fee. Home Depot’s licensed and insured professional technicians typically charge an installation fee of around $90, with an additional fee added based on the distance that must be traveled.

Most toilets, unless they are special or unique, will run between $70 and $200, depending on the brand, style, and quality of the product. If you choose to install yourself, most retailers sell kits to help with the process.

These kits typically include the necessary tools, such as wrenches and a wax ring, as well as a step-by-step guide.

In addition to the initial cost of the toilet and fee for the installation, the cost may also include items such as a shut-off valve, tank fill valve, water supply line, wax ring, and caulking.

In conclusion, the exact cost of a toilet installation at Home Depot will depend on the specific items that are included as well as the type and brand of toilet selected. However, most installations will include the cost of the toilet and the installation fee, with additional fees or items added based on the specific needs of the project.

Does toilet size matter when replacing?

When replacing a toilet, the size of the toilet does matter depending on the space where it will be installed. The two key measurements to consider are the length of the toilet (the distance from the front of the toilet to the wall) and the distance from the two outlet points (the waste outlet and the flush pipe) to the wall.

To worth effectively, the toilet needs to fit within the space and be correctly positioned along the wall and the two outlet points. Measurements to look out for include the rough-in, which is the distance from the wall to the centre of the waste outlet.

This can range from 7-12 inches and usually falls within either a 10 or 12-inch rough-in size. If your old toilet was a 10-inch rough-in and it is being replaced with a 12-inch toilet, then this will impact the placement of the new toilet and can cause problems such as the positioning of the waste pipe not being correct.

Other measurements to consider are the width and depth of the toilet bowl and the total height. The width and depth relate to both the seating position and the amount of space available in the bathroom.

When measuring to replace an existing toilet, make sure to use a standard toilet seat size which is 15-17 inches long. The total height of the toilet is also important as it affects the comfort of the person using it, particularly if anyone in the household has mobility issues as a higher toilet seat can make it easier to sit down and stand up.

Care should be taken to ensure that there is enough space above and to the sides of the toilet to provide a comfortable experience.

In summary, toilet size matters when replacing an existing toilet as it is important to carefully measure and select the right sized toilet to fit the existing space and to ensure the waste pipe and toilet fit correctly.

Additionally, to ensure comfort for the user, thought needs to be given to the measurements of the toilet bowl, seat and total height.

How much should I pay for a good toilet?

When it comes to purchasing a good toilet, there is no single answer to the amount you should pay. Factors such as size, style, features, and brand can all contribute to the overall cost of a toilet.

Generally speaking, you should expect to spend anywhere from around $200 to upwards of $2,000 or higher depending on the features and material you choose.

If you are looking for a basic toilet, you should be able to find one in the $200 to $400 range. Standard toilets typically don’t come with any additional features or bells and whistles, but they should still come with a decent flushing system and a comfortable seat to sit on.

These toilets are also usually pretty basic in terms of design, so they will fit in nearly any bathroom.

If you are looking for something a little more luxurious, you can start to look at more expensive options. Some of the more deluxe toilets on the market include features such as heated seats, integrated bidets, and automatic flushing systems.

These toilets can cost anywhere from $500 to $2,000 or more depending on what features you want. Quality is also something you will want to consider if you plan to purchase a more expensive toilet, as higher end models are usually made with higher quality materials such as porcelain and ceramic.

Finally, it is important to keep in mind that the cost of installation should also be factored into the total cost of the toilet. Depending on the model and the type of installation you opt for, the installation fee could cost as much as the toilet itself.

For this reason, it is important to keep all of these factors in mind when budgeting for a new toilet.

Do you need building regs for a new toilet?

Yes, you need to apply for building regulations approval for the installation of a new toilet. Building regulations approval is a legal requirement for any construction or alteration work in the home, in order to ensure the safety of people and properties, as well as compliance with local and national laws.

This includes new toilet installations.

When applying for building regulations approval, it’s a good idea to enlist the expertise of a professional to make sure that the work meets all the relevant regulations. The professional will also be able to help you select the right materials and design elements to ensure the highest standards of safety and compliance are met.

The application process for building regulations approval will vary depending on the scope of the project and the local requirements, but it’ll usually involve submitting plans and specifications for the proposed work, for approval by the local authority.

Depending on the complexity of the project, you may also need to submit additional supporting documents or have the work inspected before approval is granted. It’s important to be aware that regulations approval will have to be granted before any building work can begin.

In summary, yes, you need to apply for building regulations approval for the installation of a new toilet. It’s important to enlist the help of a professional and be aware of the local requirements, as well as any additional documents you’ll need to submit.

Most importantly, building regulations approval must be granted before any work can begin.

Is it better to rebuild a toilet or buy a new one?

The answer to the question about whether it is better to rebuild a toilet or buy a new one depends on several factors. Generally speaking, buying a new toilet is almost always the better option as it will be more reliable than one you rebuild.

Rebuilding involves replacing some of the components of the toilet such as the flapper, fill valve, and seal kit. This can be quite labor intensive and any component you replace could be defective or not function properly or not fit properly.

You also run the risk of installing it incorrectly, leading to further problems. This could end up costing you more money in the long run.

On the other hand, if the toilet has a unique design or is very old and vintage in style, rebuilding the toilet may be a better option since it may not be possible to find an exact replacement for a newer model.

If you are working with an old or vintage toilet, make sure you have a good understanding of plumbing basics and have all of the supplies necessary to replace the components before tackling the job. Above all, safety should be your main priority.

If you don’t feel comfortable performing the repair yourself, it’s best to contact a plumber for professional help.

When replacing an older toilet the new toilet can use no more than how many gallons per flush?

The exact gallons per flush (gpf) for a new toilet is determined by the local plumbing codes or regulations. In the United States, the maximum gpf for an eligible toilet to receive WaterSense certification is 1.

28. The maximum gpf for a toilet to meet Environmental Protection Agency (EPA) standards is 1. 6. The standards for toilets outside the United States may vary from these standards, depending on the local plumbing codes.

Toilets made before 1994 used more than 3. 5 gpf, so replacing an older toilet with a newer model can greatly reduce water use. Generally speaking, the more efficient toilets use less water than the older models.