Skip to Content

How do you fix a stuck tub spout?

If your tub spout is stuck, you should first attempt to remove it using a wrench or adjustable pliers. Place the wrench or pliers securely around the base of the spout, so that it is fully encircled, and turn it counterclockwise.

If you don’t feel the spout give, you could try spraying a lubricant like WD-40 around the spout and then attempting to remove it. If the spout is made of metal, you can also use a blowtorch to try to loosen it up.

Make sure to use a cloth to protect your hands when attempting to do so.

If all else fails, you may need to cut it off by using a hacksaw or reciprocating saw. It is important to be very careful when using these tools, so make sure to wear protective clothing, eye protection, and gloves when doing so.

Once you have removed the spout, you can take it to a hardware store and purchase a new one that fits your particular tub. You will likely need to replace the mounting hardware as well. It is a good idea to replace the mounting hardware every few years, to ensure that the spout doesn’t get stuck again.

Why can’t I get my tub spout off?

It is possible that you are unable to get your tub spout off because it is either corroded, seized, or has been screwed on too tightly. Corrosion is likely to occur with brass, chrome, or other metal tub spouts and will make it more difficult to remove the spout.

Seizure can also result from corrosion if the spout hasn’t been moved in a long time. Additionally, if the spout was screwed on too tightly this can make it more difficult to remove. In order to get the spout off you should use a wrench or adjustable pliers to try and get a grip on the spout and attempt to unscrew it.

If the spout is still not coming off you may need to get specialized tools such as a basin wrench or plumber’s wrench, or you may need to seek professional help to remove the spout.

Do all tub spouts unscrew?

No, not all tub spouts unscrew. There are two main types of tub spouts: slip-on and screw-on. Slip-on spouts are slip fit into the wall, and do not require any screws to keep them in place. Instead, a rubber gasket is used to ensure that the spout is sealed against the wall.

Screw-on spouts are mounted to the wall with a threaded connection that requires a set screw to keep the spout securely in place. The set screws can be removed with a screwdriver to take off the spout.

Depending on the installation and the age of the fixtures, spouts may not require removal for maintenance and repair, and can instead be serviced in place. It is important to determine what type of spout you have in order to determine if it needs to be unscrewed to access it.

Can you change a bathtub spout without turning the water off?

No, it’s not recommended to attempt to change a bathtub spout without first turning off the water to the spout. Even if you don’t think there is any water pressure to the spout, it’s important to shut off the water before attempting any sort of repair or replacement.

If the bathtub spout is connected to a hot and cold water valve, make sure both valves are completely off before attempting to change the spout. The last thing you want is a sudden rush of water flooding the bathroom or worse.

If unsure, consult a professional plumber for help.

How do you remove a tub spout with a diverter?

Removing a tub spout with a diverter is a fairly simple process. The first step is to locate the mounting screws that secure the spout to the wall. These will usually be located on either side of the spout on the pipe that it comes out of.

Once you have the screws located, all you need to do is unscrew them to remove the spout. If you find that the screws are difficult to remove, it may be helpful to use a penetrating oil, such as WD-40, to help loosen them up.

Once the spout is detached you can remove the diverter. You may find that the diverter has a setscrew on the face which is used to secure it to the pipe. Unscrew this to remove the diverter. If the diverter does not have a setscrew and is stuck in place, it is often possible to tap it out from the wall side of the connection with a small hammer and chisel.

Once the old spout and diverter have been removed and discarded, you can begin to replace them with new components. The new spout should be secured back to the wall with the mounting screws, and the diverter should be tapped back into place.

If the new diverter has a setscrew, make sure to screw this back in as well. Finally, turn the water back on to check for any leaks, and you should now have a properly functioning tub spout with diverter.

What is a diverter on a tub spout?

A diverter on a tub spout is a mechanism made up of a valve and/or other moving parts designed to switch the flow of water from the tub faucet (spout) so that it comes out of the shower head instead.

This is usually done by pushing or pulling up on the diverter itself or by flipping a switch. The diverter allows one to change from filling the tub to taking a shower without having to turn off the water or change any plumbing.

Many modern tub-shower combinations come with built-in diverters, but separate tub and shower combinations often require an after-market diverter installed in the tub faucet. Some diverters may also offer additional features, such as a push-button rinse cycle or a volume control for the shower head.

What are the different types of tub spouts?

The most common types are the diverter spout, the wall-mounted tub spout, the gooseneck tub spout, the roman tub filler, the transfer valve tub spout, and the handheld showerhead spout.

The diverter spout is typically a short spout with a lever or knob which controls the flow of water when the lever is turned. When the lever is up, the water is directed through the spout, and when it is turned down the water is directed through the showerhead.

This is the most common type of tub spout and is often found on bathtub/shower combos.

Wall-mounted tub spouts are mounted onto the wall and are typically found on vintage bathtubs. Many styles of wall-mounted tub spouts are available including gooseneck and arc designs.

Gooseneck tub spouts are curved or extended and often come with a built-in diverter, although some include separate controls for the water temperature and pressure. They usually come in chrome, nickel, or bronze finishes and come in various lengths.

Roman tub fillers are popular for their stylish and modern design, and many are designed to include a handheld showerhead on the spout. This type of tub spout is mounted onto the wall and features separate controls for the water temperature and flow.

The transfer valve tub spout is a popular choice when retrofitting an existing bathtub/shower combination with a separate showerhead. The transfer valve spout diverts the water flow from the spout to the shower head, allowing you to use a regular showerhead without having to install additional pipes and valves.

Finally, the handheld showerhead spout combines a traditional tub spout with a handheld showerhead. The handheld showerhead is mounted onto the spout, allowing users to choose between a regular showerhead or a handheld showerhead.

How do I know if my diverter valve is faulty?

First, if there is strange noise coming from the shower when turning on the water, that is an indication that the valve could be broken and needs to be replaced. Additionally, if there is poor water pressure or a lack of hot water coming from one of the showerheads, this could also be a sign that the diverter valve needs to be replaced.

Lastly, if you switch to a different showerhead, you’ll notice that water won’t come out of one of the showerheads, or it will spray water intermittently. This could also indicate the diverter is faulty.

But the best way to know for sure is to have a professional plumber come in, inspect the valve, and make an assessment.

What does a tub diverter look like?

A tub diverter is a plumbing valve typically located on the bathtub or shower wall near the spout. It is typically made of brass or chrome and while the shape can vary, it looks like a valve or knob with a stem.

It may have a flat surface that rotates to control the flow of water between two points such as the bathtub spout and the showerhead. It can also be used to independently control water to two different ends such as a handheld shower or a whirlpool system.

When the stem is lifted or rotated, the diverter opens and water is transferred to the second outlet, such as a shower head. When the stem is released or lowered, the water is diverted back to the original spout.

In other words, the diverter works as a switch for the bathtub or shower water flow.

How much does it cost to replace a tub diverter?

The cost of replacing a tub diverter can vary based on the type of diverter and the complexity of the installation. Generally, you can expect to pay anywhere from $30 to several hundred dollars for the replacement.

Generally, the cost of parts for a tub diverter can range from around $10 for a basic diverter, to up to $200 for a more complex diverter. Additionally, if you require a professional to install the diverter, that could add to the total cost, depending on the cost of labor in your area.

Ultimately, the exact cost of replacing a tub diverter can vary depending upon the type of diverter, the complexity of the installation, and the cost of labor in your area.

Can I fix a diverter valve myself?

In short – yes, it is possible to fix a diverter valve yourself. However, you will need to make sure you have the right tools and parts, read the instructions carefully, and understand the basics of the plumbing system before attempting the repair.

It is important to recognize that plumbing can be a complex and hazardous task for even the most experienced do-it-yourselfer, and attempting to repair a diverter valve can be a difficult process. Before attempting a repair, it is important to become familiar with the type of diverter valve you have and its function in the plumbing system.

This will help you decide whether the repair is a task within your own capability or whether it is better left to a more experienced plumber.

You will also want to make sure you have the right tools and parts. Different diverter valves require different tools, so you will want to understand what type of valve you have and the tools that are necessary for the repair.

You may also need gaskets and O-rings, so be sure to purchase these items as well.

If you have the necessary tools and parts, read the instructions carefully, and feel comfortable with the repair, then you may be able to fix the diverter valve yourself. Start by turning off the water supply, loosening the fittings, and taking apart the valve.

Clean the valve and components of all debris before reassembling. Install the new parts, gaskets, and O-rings and reassemble the valve. Finally, turn the water back on and check for leaks.

Repairing a diverter valve can be a challenging task, and it is important to understand the necessary tools, parts, and instructions in order to be successful. Be sure to take your time and read up on the process before attempting the repair.

If you are not comfortable with the repair, it is best to leave it to a more experienced plumber.

Is a diverter valve expensive?

The cost of a diverter valve can vary depending on the type and size of the valve, as well as the materials used. Generally speaking, the more sophisticated the valve, the higher the cost. Basic diverter valves can range from $20 to $50, while more complex models can cost up to thousands of dollars.

Additionally, you have to factor in the cost of installation, which can add to the overall cost. To give you an idea of the cost of a diverter valve, a standard 1/2″ PVC two-way valve can cost around $80 plus installation.

If you’re looking for a higher-end valve, such as a brass or stainless steel diverter valve, the cost will likely be higher due to the materials used.

Do all tub faucets have set screws?

Not all tub faucets have set screws. The type of faucet used in a bath tub may determine whether or not a set screw is required to secure the faucet in place. For example, most single-handle faucets do not require a set screw.

However, two-handle or widespread faucets typically require a set screw because the handles must be securely fastened to the faucet stem. Additionally, some bathroom faucets use set screws only if the faucet is designed to be attached to a full-sized escutcheon plate.

If a faucet is not attached to a plate and has no handles, it can usually be held in place with a single center screw and does not require a set screw. Ultimately, it is important to consult the manufacturer’s instructions for the specific model of faucet before attempting to install or repair it.

How are tub spouts attached?

Tub spouts are attached to the water supply system and come in an array of styles. The most common types of connections involve threading, slip fit, or a diverter.

For threaded tub spouts, the spout has interior threads that are connected to the water supply pipe by a nipple and coupling nut. The nipple is threaded onto the pipe and a rubber washer is placed above the threads.

The coupling nut is then screwed on over the washer and tightened. When the spout is connected to the water supply line, the coupling nut holds the spout in place.

For slip fit tub spouts, the spout has an extending nipple that slides over the end of the water supply pipe and is then secured with a set screw. A rubber washer should be placed between the pipe and the spout nipple to create a water tight seal.

The third type of connection uses a diverter. The diverter is a style of spout that connects directly to the water supply line. It has a built in valve that redirects the water to the shower nozzle when the shower is on.

You can also choose to add a deck-mount tub filler, which is a trim piece that is mounted to the side of the wall. This is usually used when the tub spout would interfere with a shower riser.

It is important to make sure that the connection is done properly in order to ensure a water tight seal and safe connection. It is recommended that you hire a professional for complex installations to ensure everything is done correctly.

How do I know if my tub spout has a set screw?

To determine if your tub spout has a set screw, you will need to take a close look at the spout and its lines. Typically, a set screw is located near the base of the spout and will be hidden from view by a decorative cover or cap.

If you notice a small hole or circular shape near the base of the spout, this is likely the area where the set screw can be found. You may need to remove the decorative cap to access the set screw. Some set screws are also located on the underside of the wall flange, so be sure to check both the front and back sides of the spout before making a decision.

Additionally, if you have a box-style tub spout, you may need to remove the wall flange to locate the set screw.