Hanging curtains on a window with moulding is a fairly easy task. Here are the steps to follow:
1. Start by measuring your window to determine where the curtains should be hung. Measure the height and width and note where the moulding is on each side.
2. Choose curtain rods that are wide enough to span the entire window frame and long enough to fit the width of the curtains. Install the curtain rods onto the wall where the moulding is located.
3. Hang the curtains using the curtain rods. If the curtains have tab tops, slide the tabs onto the rod. If the curtains have grommets, thread the rod through the grommets.
4. Adjust the height of the curtains so the bottom of the fabric will just clear the moulding when the curtains are opened.
5. Tighten all the screws on the curtain rods and ensure the curtains are hanging properly.
6. Check the curtains to make sure they hang properly and that the moulding does not get in the way when the curtains are open.
That’s it! By following these steps, you should be able to easily hang curtains on a window with moulding.
Do curtain rods go above trim?
When deciding if a curtain rod should go above or below trim, the style of hardware and the overall design of the room should be taken into consideration. In general, a curtain rod should be installed above trim to maximize the overall look and feel of a room.
Doing so will allow for curtains to flow freely and drape properly, creating a much nicer aesthetic than if the rod were placed below the trim. Additionally, depending on what type of hardware is used, a top mount can actually make the hardware less noticeable.
If the style of hardware does not permit mounting above trim (heavy duty poles, brackets, etc. ), then it is usually acceptable to install beneath the trim. However, this should be done thoughtfully and with careful consideration of how it will look in the overall design of the room.
Can I hang things from crown molding?
Yes, you can hang things from crown molding. It is a common practice to hang lightweight items such as artwork, mirrors, and seasonal décor. However, it is important to note that crown molding is not designed to bear heavy weights.
Be sure to use mounting hardware specifically designed for the wall material, and use anchors and screws that match the weight of the items you are hanging. If you’re hanging something particularly heavy, such as a mirror or a shelf, use appropriate hanging hardware and add wall studs for extra support.
For added safety, consider adding an external frame or mounting bracket to the item you are hanging to help distribute the weight more evenly. Additionally, when hanging items from a crown molding, be sure to have someone help you lift and install the items to prevent accidental damage or injury.
How do you attach drapery tape to trim?
Attaching drapery tape to trim requires a few simple steps. First you need to measure the trim and the drapery tape. Make sure to account for any excess that you need at the beginning and end of the trim.
Cut the drapery tape to size and pin it to the trim. Use pins that won’t leave holes in the trim. You will want to make sure the bottom edges are parallel when pinning.
Once the drapery tape is pinned to the trim, use a sewing machine to sew it onto the trim. You will want to keep the stitches close together but not too tight so they do not pucker the trim. Be sure to read the care instructions on the trim to make sure you are using the correct needle and thread for it.
Finally, iron over the drapery tape and trim with a pressing cloth to secure the seam and make sure the tape is flat against the trim. If you are using a different type of tape, such as a grosgrain ribbon, you can secure it to the trim with adhesive tape.
Make sure to read the care instructions to ensure it won’t damage the trim.
Should curtains be above the baseboard?
In general, it is recommended that curtains should be hung above the baseboard, rather than below it, as it will provide a more streamlined and aesthetically-pleasing look. When the curtains hang above the baseboard, they give a sense of height and can create a strong focal point in the room.
Plus, the curtains will also help define the space, creating a cohesive look. It is important to take into consideration the overall look and feel of the room, as well as the size of the curtain rod and the amount of available space before making your final decision.
What is the rule for hanging curtain rods?
When hanging curtain rods, there are a few factors to consider to ensure the rods are hung correctly and securely. The rod should be hung at the appropriate height – typically a few inches above the window frame.
It’s important to make sure the rod is level before tightening the set screw. If using wall anchors, make sure to select the appropriate size for the weight of the curtains and rod. For hanging heavy curtains, mounting the rod into a wall stud is recommended.
Depending on the material of the rod brackets, lag screws, toggle bolts, or drywall anchors should be used to firmly secure the rod to the wall. To ensure the curtains hang properly, use the rod brackets to frame the window.
If hanging pinch pleat curtains, leave enough space between the bracket and the wall for the hooks to slide through. Finally, make sure to use a drill with the appropriate drill bit to make holes appropriately sized for the wall anchors or screws.
Should curtains hide window trim?
Whether Curtains Should Hide Window Trim or Not is a matter of personal preference as both options can look good. For example, hanging curtains that cover the entirety of the window trim, such as floor-length drapes, can make the windows look larger and the space seem more luxurious.
On the other hand, having curtains that only cover the glass and sit within the surrounding window trim can give a more crisp and tailored look. Ultimately, the look and feel of your space will depend on the type of curtains and window trim you choose to go with.
If your window trim is attractive and you’d like to show it off then opt for shorter curtains that don’t hide it. If it’s a bit dated or unappealing, then you may want to consider longer curtains that can hide it.
Ultimately, it’s up to you and what you think looks the best.
Do Command Strips work for hanging curtains?
Yes, Command Strips are a great option for hanging up curtains. These hooks are designed to hold up to 7. 5 pounds, so they should easily support the weight of a light curtain. Make sure to pick out the appropriate size hooks to ensure a secure hold.
For heavier curtains, you may want to use a different type of fastening hardware.
To hang your curtains using Command Strips, first adhere the mounts to your wall. When installing the mounts, make sure to hold the curtains up against the wall to determine the correct length and positioning.
Mark the spots you’ll need to place the mounts with a marker. Next, add the appropriate number of strips per mount used. Once the strips have been applied, you can then add the curtains via the top hooks on the mounts.
Lastly, press firmly to make sure the strips are properly adhered to the wall.
What are the common mistakes in hanging curtains?
When hanging curtains, there are several common mistakes to avoid. One of the most common mistakes is not properly measuring the window. When hanging curtains, you want them to hang correctly, which means you need to accurately measure the window and purchase curtains that are the proper size.
Another commonly made mistake is hanging the curtains too low. You want the curtains to be hung high enough that they can be opened and closed without obstruction, while still providing adequate coverage.
Another mistake many people make when hanging curtains is not using the right hardware. Investing in high-quality curtain hardware is essential to make sure your curtains are securely and properly hung.
Hanging curtains that are too long is also an issue, as this can create an awkward looking situation. Finally, not taking into account the type of fabric when selecting the rod and brackets can result in curtains that are difficult to open and close.
How do I cover a very wide window?
Covering very wide windows is a challenge because standard curtains and window treatments may not fit properly. One of the most effective ways to cover a very wide window is to use a combination of draperies with an under-treatment.
Using an under-treatment such as panels, shades or shutters positioned below the draperies will provide a finished look and will also help block out light better than draperies alone. When using multiple panels or shades to cover a very wide window, each panel or shade should overlap the next slightly for a cohesive look.
Another option for covering a very wide window is to create a curtain wall. This will create a continuous panel that is custom fit to the window width and height. Rods are positioned higher on the wall and looped back to the window.
Installing a curtain wall allows the window to be totally covered with a custom fit that doesn’t leave any gaps. No matter which option you choose, make sure to measure accurately before purchasing window treatments.
How wide should trim be on curtains?
When deciding how wide trim should be on your curtains, there are a few factors to consider such as the size of the window, the type of trim used, and the overall look you are going for. Generally, the trim width should be anywhere from 1/4″ to 1/2″ for smaller windows, 1/2″ to 1″ for medium-sized windows, and 1″ to 2.
5″ for larger windows. The type of trim you use will also influence the width. For example, if you’re using a wide gimp trim, it may be adjustable from 1″ to 4″, depending on the product. Additionally, you may want to consider the overall look you’re going for.
If you’re aiming for a bold and grand look, a wider trim may be the way to go, while a thinner trim will give a more subtle and delicate look. All in all, the trim width should fit the size of your window and the overall look you are trying to achieve.
How far from the edge of a window do you hang a curtain rod?
The correct distance to hang a curtain rod from the edge of a window depends on a variety of factors, such as the kind of window, the size of the curtain rod, and aesthetic preferences. In general, the far right and left sides of the window should have about a four inch gap between the edge of the window and the outer edge of the curtain rod.
If your curtains are particularly large and bulky, you may want to hang your curtain rod a few more inches away from the window. Additionally, you may want to mount the curtain rod slightly higher than the top of the window in order to give the illusion that the window is larger.
If you are looking for a more modern look, you may be able to get away with mounting the curtain rod more close to the window. Ultimately, when it comes to hanging your curtain rod, measure twice and mount once so you can be sure to get the look you’re going for.
How high above trim should you hang curtains?
When choosing the height to hang curtains, the most important thing is to have them look visually appealing and be functional. Generally, curtains should be hung at least 4 inches above the window trim to the ceiling or a couple of inches below the ceiling.
The idea is to provide a little visual space between the top of the window trim and the curtains. This will make the window look larger and more proportional. If the room is on the smaller side, the curtains should be hung higher, and if the room is larger, the curtains should be hung lower to frame the window.
One consideration is to hang the curtain rod a few inches above the top of the window trim, so that when the curtains are opened, the window is framed by the curtains. Additionally, if the rods are installed 2-3 inches outside the window trim it can make a space look bigger.
How far above baseboard should curtains be?
When selecting curtains for windows, it is important that you hang them high enough above the baseboard to allow for maximum light and to create the illusion of a larger space. As a general rule, curtains should be hung at least 12 inches above the baseboard, although this measurement can vary depending on your window size, the length of the curtains, and the desired look of the room.
Additionally, you should ensure that the curtains extend near the ceiling line or at least to the top of the window trim. Doing so will not only bring a higher sense of style and sophistication to the room, but it also creates a better sense of balance.
If you have tall windows or ceilings, you may want to hang the curtains even higher than 12 inches. This can be a great way to draw attention to your window and to make it the focal point of the room.
Hanging your curtains higher can also help to increase the overall aesthetic of the room. When in doubt, ask an experienced professional for help.
Where should curtains fall on window sill?
The ideal placement for curtains on a window sill depends on the particular size, layout, and shape of the window itself. However, there are some general guidelines to keep in mind.
When installing curtains with a rod, the ideal position is for the rod to be slightly higher than the highest point of the window frame. This will ensure the curtains will hang at least a few inches below the frame, providing the best possible look and providing the most maximum light blocking.
When installing curtains with rings, the ideal placement should provide curtains that will hang around 2 inches below the window sill, while also reaching the floor. This will keep the curtains level and give them a beautiful drape.
It’s important to note that the ideal curtain placement varies in each specific situation. The best way to find the right placement is to experiment with different heights – and always keep the frame of the window in mind.