Skip to Content

How do you install an American Standard mainstream toilet?

Installing an American Standard mainstream toilet is relatively easy and straightforward. Here are the steps to properly install the toilet:

1. Begin by removing the old toilet. Turn off the water supply to the toilet, then flush the tank and bowl to empty out any remaining water. Loosen the nut on the water supply line, then carefully lift the old toilet from the floor.

2. Place the wax seal on the bowl of the new toilet where the bolts will go through. Set the new toilet in place, being sure to align the holes in the base with the bolts in the floor.

3. Use the permitted metal washers to secure the new toilet. Then, hand tighten the nuts. Do not use a wrench to over-tighten the nuts, as it could damage the base of the toilet.

4. Next, attach the new water supply line to the water supply valve. Make sure that all the connections are tight and secure. Then, turn the water supply valve back on and flush the toilet to ensure that the water is flowing properly.

5. Finally, caulk the base of the new toilet to the floor. This will ensure a leak-free seal.

With these steps, you should be able to properly install an American Standard mainstream toilet.

How can I tell what model American Standard toilet I have?

To determine what model American Standard toilet you have, there are a few different methods you can use.

First, look for the toilet’s model number, which should be located on one side of the tank near the back. This number should be printed on a small label and should begin with the manufacturer’s initials (e.

g. “AS” for American Standard). After finding the model number, research it on the American Standard website.

If you cannot find the model number, take pictures of your toilet and compare them to pictures of American Standard toilets on their website. By comparing bodies, tanks, and handles, you should be able to determine the model.

If neither of these methods work, you can always call and talk to a customer service representative at American Standard. Simply explain your situation and they should be able to help you identify your toilet model.

How do you install a toilet for beginners?

Installing a toilet for beginners may seem daunting, but it’s actually a fairly simple process that doesn’t require a great deal of skill. Before beginning, make sure you have the required tools and materials on hand, such as a new toilet, wax ring, flange, closet bolts, sandpaper, and a toilet mounting kit.

Once ready, you can start the installation process.

1.Turn off the water supply to the toilet, located at the wall behind it. This will prevent any water from flowing when you try to remove the old toilet.

2. Remove the old toilet by unscrewing the bolts on either side and lifting it off the floor. Be sure to wear protective gloves to avoid any cuts, and have a bucket ready to catch any residual water or waste in the tank or bowl.

Dispose of the old toilet properly.

3. Once the old toilet has been removed, clean and sand any surface oxidation on the flange, then install it onto the floor.

4. Place the wax ring onto the toilet flange and position the new toilet onto the flange. Use your hands and a rubber mallet to make sure the toilet is level, then secure it by tightening the closet bolts.

5. Now it’s time to reconnect the water supply. Start by connecting the water supply line to the fill valve on the toilet, then turn on the water.

6. Flush the toilet to check for any leaks, then bolt down the toilet and connect the flush handle.

7. Your new toilet is now ready for use! Make sure to test the flush mechanism a few times to ensure that everything is working properly.

Are all American Standard toilets the same size?

No, not all American Standard toilets are the same size. American Standard toilets come in a variety of sizes and shapes, from traditional round or elongated bowls to wall-hung or free-standing configurations.

To ensure the best fit for your bathroom, be sure to measure your space before shopping for a toilet. Elongated bowls are typically 2 inches longer than round bowls and provide added comfort for taller users or those wanting a little extra space in a smaller bathroom.

Wall-hung toilets save space and can be mounted at different heights for custom comfort. Bowl heights may vary as well, with right height models being 17-19 inches and comfort height options being 16-17 inches.

With the variety of shapes, sizes, and styles offered by American Standard, you’re sure to find the perfect toilet for your home.

How do I know if I have a 2 inch or 3 inch toilet?

Measuring the size of your toilet can help you determine whether it is a 2 inch or 3 inch. To measure the size of a toilet, follow these steps:

1. Turn off the water supply to the toilet and flush it until the majority of the water has drained from the tank.

2. Remove the tank lid and set it aside in a safe place.

3. Measure the distance from the inside top of the flush valve where the tank bolts attach to the bottom of the overflow tube. This will indicate the size of the toilet. If the distance is two inches, then it is a two-inch toilet.

If the distance is three inches, then it is a three-inch toilet.

4. Replace the tank lid and turn the water back on.

Is a taller or shorter toilet better?

When it comes to toilets, there is no single answer for what is “better. ” The appropriate toilet for your bathroom depends on a variety of factors, such as the size of the bathroom, the size of the people who will be using it, and any disability needs.

Generally speaking, taller toilets are typically recommended for adults and elderly people who have difficulty getting up and down due to joint and mobility issues. Taller toilets typically range from 17-19 inches in height, while most standard toilets are around 14-15 inches.

Taller toilets offer a more comfortable sitting position and more legroom, which is helpful for elderly people or those with larger frames. On the other hand, shorter toilets are typically recommended for children and people with shorter stature.

Shorter toilets typically range from 11-14 inches in height, and provide a more comfortable position for smaller individuals. Ultimately, only you can decide which type of toilet is best for your bathroom, and it’s important to consider all factors when making your decision.

Is my toilet a 10 or 12 inch rough-in?

In order to determine whether your toilet has a 10-inch or 12-inch rough-in, you will need to measure the distance between the wall behind the toilet and the center of the drain pipe. If the distance is 10 inches, then your rough-in is 10 inches, and if the distance is 12 inches, then your rough-in is 12 inches.

To measure, start by sliding out the toilet so you can access the drain pipe. Then, use a tape measure and measure the distance between the back wall and the center of the drain pipe. Record this measurement so you know if your toilet has a 10- or 12-inch rough-in.

How many inches should a toilet be off the wall?

The ideal distance from the wall for a standard toilet is 12 inches. This distance allows for good accessibility and adequate room for cleaning. Properly installed toilets must meet certain minimum requirements, as set by building codes, in order to ensure both function and safety.

As such, the minimum distance to the wall for a standard toilet should be at least 8 inches. Having extra clearance of 4 inches beyond this minimum is desirable for comfort and practical considerations.

When wall clearance is an issue, a wall-hung toilet can be used, which can be installed virtually flush against the wall.

Does toilet need to rest against wall?

No, a toilet does not need to rest against a wall. Toilets are generally self-contained units that rest on their own or on top of the flange that sits in the ground. Some toilets may be designed to rest against a wall, but it is not necessary.

Depending on the toilet and the bathroom’s layout, an installation may require the toilet to rest against a wall, but in most cases, it is not necessary.

Should toilet flange be flush with floor?

Yes, the toilet flange should be flush with the floor. This is because the toilet flange is the fitting to which the toilet is attached and if it is not flush with the floor, water may leak and create damage.

In addition, the toilet may become unstable if the flange is not even with the floor. To ensure the flange is at the right height and not too high, it is important that it be installed correctly with the right materials.

The flange will often come with a wax ring that will allow the flange to be set to the right level. A rubber gasket can be used to keep the flange firmly in place. You may also need to use shims to ensure the flange is level with the floor.

Setting the flange correctly is important, as a toilet that is not level can cause problems with water flow, toilet leakage, and general toilet stability.

How do you rough in a toilet?

To rough in a toilet, the first step is to determine the placement of the toilet on the floor. It is important to leave enough space in front of the toilet and around the sides, so measure and determine the correct placement.

Next, turn off the water at the shutoff valve and flush the toilet to empty all of the water from the tank. Then, remove the tank and the bowl from the floor and set aside.

Using a tape measure, determine the exact distance of the back wall of the toilet to the center of the closet bend. Make sure to measure from the center of the toilet bolt holes on the back wall, located halfway down from the top of the toilet bowl.

Mark the location of the closet bend in the floor and make sure it is plumb.

Using a level and a drill, fasten the closet flange to the floor. The closet flange should be installed securely, with no more than ¾ inch of play (otherwise the toilet may not fit properly). Once the flange is secured, use a wax ring to seal it and the toilet bowl beneath it.

Align the toilet bowl over the closet flange and make sure it is level. Secure the bowl to the floor using two bolts, nuts, and washers. Next, install the tank and connect the water supply line to the angle stop.

Finally, check to make sure that all of the fittings are secure and there are no leaks, and you’re done!.

How do you tell if your toilet is 10 or 12 inch?

The easiest way to tell if your toilet is a 10 or 12 inch rough in is to measure the distance from the wall behind your toilet to the center of the closet bolts. If the measurement is 10 inches, then your toilet has a 10 inch rough in.

If the measurement is 12 inches, then your toilet has a 12 inch rough in. It is important to measure correctly since the 10 inch and 12 inch toilet options often look very similar. If you are having difficulty measuring or are unsure of the measurement, it is best to consult with a professional to ensure you choose the correct size for your toilet.

How do I know what size toilet rough-in I have?

To determine the size of your toilet’s rough-in, measure the distance between the wall behind the toilet and the center of the waste outlet – this is the rough-in size. The standard rough-in size for residential toilets is usually 12”, but some toilets require a 10” or 14” rough-in for installation.

To accurately measure the distance, you will need to remove the toilet from the floor and measure between the back wall and the center of the waste outlet. On some older toilets you may find the rough-in size stamped on the tank – usually near the bolt holes.

Once you have the size, you can then select a new toilet that fits your rough-in.

How do I find out what year my toilet was made?

To determine what year your toilet was made, you’ll need to look for the date code stamped onto the toilet. This code beginning with the letter “K” can typically be found on the back or underside of the bowl or tank, or inside either.

The first letter in the code indicates the month, and the first two numbers indicate the year. For example, if the code reads “K 1 13”, the toilet was manufactured in January 2013. Depending on the age of your toilet, you may also find a manufacturing date on the top of the tank lid, or on the flood rim.

Additionally, if your toilet is relatively new, you may be able to refer to the user manual for exact manufacturing details.

What size flush valve is in American Standard?

American Standard toilets come with either a 3-inch or a 2-inch flush valve. The size of the flush valve is based on the model of the toilet and the age of the toilet. For most contemporary models, a 3-inch flush valve is the standard size, but for some older models, a 2-inch flush valve may be used.

It is important to identify the size of your flush valve correctly in order to secure the proper replacement parts and correctly install the toilet. Furthermore, newer toilets generally come with a higher flush performance and may require a 3-inch flush valve in order to achieve the correct performance.

To determine the size of your flush valve, measure the diameter of the opening in your tank. If the opening is 3 inches in diameter, then the flush valve is a 3-inch flush valve. If the opening is 2 inches in diameter, then the flush valve is a 2-inch flush valve.