The rough-in for a toilet is the measurement from the wall behind it to the center of the waste line. This is also referred to as the “back of the bowl” measurement. A toilet rough-in can range from 8-12 inches, and can vary depending on the manufacturer and model of toilet you’re installing.
To measure the rough-in for your toilet, use a tape measure to measure the back of the toilet from the wall to the center of the waste line. If you’re replacing an existing toilet, you can also use the old toilet as a guide for measurement.
Once you’ve determined your rough-in, you’ll know what size of toilet to purchase. Additionally, you’ll need to use the same rough-in when installing a toilet flange, in order to ensure that your toilet waste line is properly connected.
Is toilet rough in from finished wall?
No, the “toilet rough in” is not the same as having finished walls. Toilet rough in refers to the positioning of the water supply and drain lines coming out of the floor to the toilet. It is the part of the plumbing installation that must be completed before the toilet is installed, but the wall finishes such as drywall or tile still need to be done after the rough in is completed.
This can usually be done by a plumber or do-it-yourself enthusiast with basic plumbing knowledge and tools.
What does 12 inch rough in mean when installing a toilet?
When installing a toilet, 12 inch rough in means the distance between the wall behind the toilet and the center of the toilet drain opening. The size of the rough in is important to make sure the toilet fits properly, as toilets are usually manufactured with specific rough-in dimensions.
This is usually either 10-inches or 12-inches from the finished wall surface. 12 inch rough in is fairly standard, but it is important to make sure you have the correct size for the toilet you are installing before you begin the installation.
The rough in dimension for your toilet can usually be found in the product specifications that come with the toilet or in the documents provided with your bathroom plans.
How do I know if my toilet is 10 or 12 rough-in?
To determine if your toilet is a 10 inch or 12 inch rough-in, measure the distance from the wall behind the toilet to the center of the closest hold-down bolt. For a 10 inch rough-in, the measurement should be around 10 inches.
For a 12 inch rough-in, the measurement should be around 12 inches. If you are unsure of your rough-in size, consulting a plumber or visiting a home improvement store may help you get an accurate measurement.
It is important to ensure you know your toilet’s rough-in size before purchasing a new one, as toilets come in many shapes and sizes that vary in compatibility for different rough-in sizes. Furthermore, certain toilet components will only fit certain rough-in lengths, so it is important to know the rough-in size of your toilet.
What is the difference between a 10 inch and 12 inch rough-in toilet?
The key difference between a 10 inch and 12 inch rough-in toilet is the distance between the wall and the centre of the waste outlet. A 10 inch rough-in toilet has a measurement of 10 inches from the wall behind the toilet to the centre of the waste outlet, while a 12 inch rough-in toilet has a measurement of 12 inches.
The distance between the wall behind the toilet and the waste outlet, also known as the rough-in measurement, plays a key role in determining which particular toilet will fit the space available in a bathroom.
It is therefore important that this rough-in measurement, either 10 inch or 12 inch, is known before searching for a new toilet to replace an existing one or selecting a new toilet for a remodel project.
When selecting a new 10 inch or 12 inch rough-in toilet, it is important to also take into consideration other factors such as the length of the bowl, the height of the toilet, the type of flushing technology and the style of the toilet, to ensure that the new toilet is the most suitable option for the bathroom space.
How far off finished wall is the toilet drain?
The exact distance a toilet drain is from a finished wall typically depends on the model of the toilet and the type of mounting that is used. In general, the majority of toilets are mounted with a bowl-to-wall distance of 12 to 14 inches, however some toilet models have a set distance that can range between 9 and 19 inches.
The drain when connected to the wall will usually be an additional 1 -1. 5 inches away, depending on the type of trap used and the connection method. Additionally, some modern toilets may have a bottom inlet valve located near the drain which could increase the distance from the finished wall.
How many inches should a toilet be off the wall?
When installing a toilet, the minimum distance of the toilet should be at least 15 inches from the wall. However, different manufacturers will have varying recommendations, so it’s important to consult the installation instructions that came with your specific toilet before installation.
If you are putting a toilet in an especially narrow bathroom, the toilet may need to be even closer than 15 inches from the wall. In addition to the wall, a clearance of 12 inches must also be left from any other obstruction behind or next to the toilet.
Are all toilet holes the same distance from the wall?
No, not all toilet holes are the same distance from the wall. The distance of the toilet hole from the wall will depend on the model or type of toilet that is installed, as well as how much space there is behind the wall.
The standard distance for a toilet hole from the wall is 12 inches, which is the measurement used by most models of toilets. However, there are a few models and types of toilets that feature a different distance from the wall.
Some elongated toilets, for example, require a distance of over 15 inches from the wall, to accommodate the large size of the bowl. Additionally, commercial toilets and toilets installed in tight spaces may have a distance from the wall of as little as 9 inches.
When installing a new toilet, it is important to measure the distance from the wall and to determine the best fit for the space.
How do you tell if a toilet is a 10 inch rough?
To determine if a toilet has a 10 inch rough-in, measure the distance from the wall behind the toilet to the center of the closest coupling bolt on the toilet. This is referred to as the toilet’s ‘rough-in’ size and is typically determined by measuring from the wall behind the toilet to the center of the closet flange.
A 10 inch rough-in typically measures 12-13 inches from the wall behind the toilet to the center of the closet flange. To ensure an accurate measurement, you should place the tip of a measuring tape directly on the floor behind the toilet, then measure to the center of the closet flange.
Alternatively, many toilet manufacturers print the rough-in size directly onto the base of the toilet.
Does toilet rough in size matter?
Yes, toilet rough in size does matter, as it has a direct effect on the dimensions of the toilet that can be installed in a given bathroom space. Most toilets are either 12 inches or 14 inches in rough-in size.
The rough-in size is the distance between the center of the closet bolts, which hold the toilet in place and the wall behind it. If the wrong size toilet is purchased, it will not fit properly and can cause a major issue.
Therefore, it is important to determine the rough-in size before purchasing a toilet, to make sure that it will fit and work properly. The rough-in size can be measured from behind the toilet with a tape measure, or in some cases the information may be listed on the existing toilet.
Is my toilet a 2 inch or 3 inch?
In general, most standard residential toilets in North America are 3 inch flush valves, but depending on the age and type of your toilet, it may be a 2 inch flush valve. To determine if your toilet is a 2 inch or 3 inch flush valve, you will need to measure the width of the outlet opening on the tank.
If it is approximately 2 inches wide, then the flush valve is a 2 inch flush valve. If it is approximately 3 inches wide, then it is a 3 inch flush valve. You may also need to look for a product label on the tank or toilet that identifies the specific model.
If you are still unsure whether your toilet is a 2 inch or 3 inch flush valve, it is best to check with a plumber or contact the manufacturer.
Should toilet flange be flush with floor?
Yes, the toilet flange should be completely flush with the floor. The flange is a metal or plastic ring that is attached to the floor and serves as a means for the toilet to be anchored to the floor.
When installed properly, the flange should be flush with the surface of the floor which will create a strong, stable, and flat base for the toilet. If the flange is not properly installed it may lead to toilet instability, potential leakage, and water damage.
Installation should be done carefully and should involve using a wax sealant, or flange spacer, to ensure the flange is securely and snugly installed against the floor. It is important that the surface around the flange is level and flat and that it is properly sealed to the floor and the toilet.
How do you fix a toilet that is too far from the wall?
In order to fix a toilet that is too far from the wall, you will need to check the flange – the part of the toilet that attaches it to the floor. If the flange is installed incorrectly, then the toilet will be further away from the wall.
To begin, unscrew the nuts from the bolts underneath the toilet and remove the toilet from the floor. Next, inspect the flange to determine if it has been installed properly. If not, then remove the flange and install a new one, carefully following the manufacturer’s instructions.
Make sure to use caulk around the toilet’s base and the flange to ensure a secure installation.
Once the flange is installed properly, place the toilet over the flange and use the bolts to secure it to the floor. Make sure there are rubber washers over the bolts before securing in place to ensure they don’t rub against the underside of the toilet.
Once the toilet is securely installed, it should be closer to the wall than before.
Fixing a toilet that is too far from the wall may be an involved process, but with some patience and care it can be done.
Can you replace a 11 inch rough-in toilet with a 12 inch rough-in toilet?
Yes, you can replace an 11 inch rough-in toilet with a 12 inch rough-in toilet. However, before doing this you will need to measure the distance between the wall and the existing closet bolts. Closet bolts are located at the back of the toilet, usually 2 or 3 inches from the back of the toilet.
It is important to ensure that the distance is at least 12 inches before proceeding with the replacement. If the distance is 11 inches, the new 12 inch rough-in toilet would not fit properly and the installation could be difficult.
Once the measurements have been taken, you can begin to purchase the new toilet. Make sure to take into consideration the height, shape, material, and color when purchasing the toilet. Additionally, other items that should be purchased, along with the toilet, are a wax seal and a new mounting hardware set.
When it is time to install the new toilet, the old toilet should be disconnected and removed. Then, the wax seal should be put in place, followed by the installation of the new mounting hardware set, which is designed to fit the 12 inch rough-in.
After the new mounting hardware is secured, the new toilet should be placed over the bolts and held in place while the mounting bolts and washers are tightened.
Lastly, the toilet should be checked for level and secured with additional washer and nuts, followed by the connection of the water supply line. After that, the toilet should be tested to ensure that it flushes and drains properly.
If all of this goes according to plan, you’ll have a new 12 inch rough-in toilet installed with minimal trouble.
How far from the wall should a toilet rough in be?
When installing a new toilet, it is important to make sure that you install the rough in the correct distance away from the wall. Generally, the rough in should be from 12 inches to 14 inches away from the wall behind the toilet.
However, it is important to measure the toilet that you are installing to make sure that it matches the given specifications for the particular model. Additionally, the distance will depend on the type of toilet you choose.
For instance, if you are installing a wall-mounted toilet, the rough in should be about 9. 75 inches away from the wall. If you have any questions about the specific measurements for your toilet, it is recommended to consult with a plumbing professional for further advice.