Making homemade bathroom shelves is a relatively easy project for anyone handy with tools. First, you need to determine what materials you’re going to need and how much. Plywood is a good material for shelves, as you can get it in various thicknesses and shapes.
You will also need 2x4s, screws, and dowels. You can also use wood glue if you don’t have dowels.
Once you have all the materials, you need to measure the area you’re planning to mount the shelves. This will determine what size boards and screws you will need to purchase. You’ll also need to decide how many shelves you want to build and how deep they should be.
Once you have all the materials, begin by cutting the plywood to the size you’ve determined. Cut the 2x4s to the desired length, and then use a hole saw to create a hole in each end of the board, making sure the hole is wide enough for the dowels or screws.
Secure the boards together with either screws and dowels, or wood glue.
Now, you can mount the shelves on the wall. Make sure the shelves are level and secure the shelves to the wall using screws. Once the shelves are secure, you can add decorative items such as towels and baskets.
With a little planning and effort, your homemade bathroom shelves will look great in no time.
What is the cheapest way to make shelves?
The cheapest way to make shelves is to repurpose existing materials, such as bookshelves, shelves on a dresser or armoire, or shelves you might find at yard sales or thrift stores. These can often be customized to meet specific needs, such as being made taller or wider, or getting decorative trim, paint, or wallpaper to spruce them up.
Other cost effective options include using floating shelves (which just need to be mounted to the wall), creating a frame and adding boards cut to the right length, or building bookshelves out of Standard lumber and plywood.
Standard lumber can usually be acquired from local hardware stores at reasonable prices, while plywood can be found at any lumber store or online. You can also use cinder blocks and shelves, and add a bit of stain or paint to customize the look.
This can be a budget friendly approach as well.
How do you build a bathroom wall shelf?
Building a bathroom wall shelf is a relatively easy DIY home improvement project that can streamline your use of space and help to keep your bathroom organized.
To begin, you will need a few basic tools such as a level, jigsaw or saw, sandpaper, drill and bits, and a Phillips screwdriver for the screws. You should also have a few shelf brackets and some 2×4 boards cut to size.
You will also need 2 pieces of plywood and a couple of screws for hanging the shelf.
After collecting all the materials, you will need to measure the wall and make sure that the top of the shelf will be lined up at the same level of the wall tile. Use the level to mark the wall where it needs to be.
Next, predrill the holes into the board where the shelf brackets will go. Make sure to use a pilot hole before you go with the bigger drill bit to make sure that the various pieces are securely mounted on the wall.
After the holes are drilled, you can use the jigsaw or saw to cut the 2×4 boards and plywood to fit the measurements of your shelf.
Once everything is cut to size and the walls are marked, attach the 2×4 boards onto the wall with the desired shelf brackets. Next, you can use the sandpaper to smooth out any rough edges before finishing it off with a coat of paint or stain in the color of your choice.
Once the boards are completely dry and in place, the plywood can be attached to the top and bottom of the boards.
To finish the project, add shelves of your choice and check the level again. For extra strength and security, add more screws to attach the shelves. Once all the pieces are in place, step back and enjoy your newly built bathroom wall shelf.
Is it cheaper to build your own shelves?
The answer to this question depends on a variety of factors and will vary based on individual circumstances. Generally speaking, it can be cheaper to build your own shelves as opposed to buying them pre-made.
Building your own shelves allows you to choose the materials and design that best fit your needs and budget. Plus, you can often find the necessary materials for a fraction of the cost of a pre-made shelf.
However, if you don’t have experience building shelves or don’t have access to the right tools, then it can be more cost-effective and time-efficient to buy shelves pre-made. Also, if you don’t want to bother with building the shelves yourself, pre-made shelves can be an affordable and convenient option.
It really comes down to your own personal preferences and available resources.
What kind of wood do you use to make DIY shelves?
When making DIY shelves, you can use a variety of types of wood, depending on your budget and preference. The most common wood used for shelves is pine, which is an inexpensive and versatile option. Other woods like oak, cherry, and maple are all options for making shelves; each has its own unique character and can bring a distinct aesthetic to a room.
In addition to natural woods, MDF (medium-density fiberboard) is also a popular choice for DIY shelves as it is low-cost and easy to work with. Whichever wood you choose to use, make sure it is of good quality and properly sealed to prevent moisture damage.
How thick should wood be for shelves?
The thickness of wood you should use for shelves depends on several factors, such as how much weight the shelves will be supporting and the overall design of the shelves. In general, shelves should be supported with a minimum of 3/4” to 1” thick boards, but thicker boards will provide more support and stability, particularly if shelving will be used to hold heavier items.
Hardboard or plywood can also be used to make shelves, however consider that they can chip and be fractured if they’re overladen with weight. For additional stability, opt for thicker boards such as plywood that is at least 3/4” thick.
When constructing shelves from particle board or MDF, use 3/4” thick boards, or thicker, for best results.
When installing your shelves, ensure that the boards are all properly supported by a frame behind them or by the wall, and that the boards won’t be overloaded with weight. Be sure to use appropriate hardware, such as through bolts or wall anchors and appropriate screws, to ensure the shelves are secure.
Is it OK to put wooden shelves in a bathroom?
It is not ideal to put wooden shelves in a bathroom, because of the high levels of moisture created in the bathroom from regular use of the shower and sink. Wooden shelves in a bathroom may be possible if they are well-sealed against moisture and the rooms temperature is regulated.
In the shower, a wooden shelf may be ok as long as it is not in contact with wet surfaces and is regularly treated with sealant or preservative. In a sink area, the shelf should be sealed and painted with a permanent waterproof seal and regularly monitored to ensure that the sealant or paint is not determined.
If these precautions are taken and the temperature of the room is also controlled, a wooden shelf may be possible in some areas of a bathroom. However, a metal shelf is usually a better choice and more resistant to the moisture and temperature changes in a bathroom.
How do you build built in shelves in drywall?
Building built-in shelves into drywall is a relatively straightforward process, but it does require some measuring and cutting before you can begin installation.
The first step is to measure the space where you plan to install the shelves. Measure the length and width of both the left and right sides, as well as the top and bottom. Once the measurements have been taken, you need to mark the walls with a pencil so you know where to cut.
Now you can begin to cut out the shelves using a drywall saw or a jigsaw. Cut into the wall slightly deeper than the width of the shelving material, as this will allow room for installation.
Once you have cut out the shelves, use an adhesive to glue the brackets to the wall. Let the glue dry for about a day before moving on to the next step.
The next step is to install the shelving material. Take your measuring tape and mark off the shelf length based on the desired size. Once marked off, begin to attach the shelving material to the brackets with screws.
Make sure the screws don’t protrude too far from the shelf material, as this could damage the drywall.
Once all of the pieces are installed, use a level to make sure your shelves are completely straight. If not, adjust the brackets slightly until they are level.
Finally, use caulk or drywall compound around the edges of the shelves to fill in any gaps or cracks. Allow the caulk to dry, then use a sanding block or fine grit sandpaper to smooth out any bumps or imperfections.
Once the built-in shelves are complete, you can add finishing touches like paint or wallpaper to match the rest of the room. With a bit of patience and careful measuring, you can easily build built-in shelves into your drywall.
How do you build a shelf above a toilet?
Building a shelf above a toilet is a great way to add storage in a bathroom. The steps to do this will depend on the type of shelf that you are installing, as well as the type of wall you are attaching to.
1. Measure the area to ensure that you have the correct size shelf. Measure the area above the toilet and select a shelf that will fit in the space. If your shelf is too large you will not be able to install it properly or securely.
2. Choose the appropriate mounting hardware. You will need hardware for mounting the shelf to the wall and hardware for mounting the shelf supports to the wall. Consider using a drill, anchors, and screws for attaching the shelf to the wall.
Additionally, consider using toggle bolts for mounting the shelf supports.
3. Remove any existing insulation near the wall where you will be installing the shelf. This step helps you properly and securely mount the shelf without any interruption.
4. Install the mounting hardware. Use your drill to securely attach the mountings to the wall. Make sure that the screws are firmly in place and the mounting is secure.
5. Attach the shelf supports. Use the toggle bolts and make sure the bolts are firmly in place.
6. Attach the shelf. Place the shelf on the shelf supports and adjust the shelf so it sits level. Use screws to attach the shelf to the wall mounting.
7. Enjoy your new shelf above the toilet!
Is it cheaper to buy or build a vanity?
Whether it is cheaper to buy or build a vanity depends on a variety of factors, including the materials used, the vanity size and style, the amount of labour involved, and the individual’s skill level when it comes to building a vanity.
Generally speaking, buying a vanity is likely to be cheaper than building one, particularly if someone is looking to buy a vanity in a standard size and style.
In most cases, pre-made vanities are cheaper, faster, and easier to install than building a custom vanity. If someone is looking to create a high-end vanity, however, the cost of purchasing the materials and the amount of labour involved in building a vanity may make the total cost more than buying an off-the-shelf item.
Additionally, the amount of time and effort necessary to create a custom piece of furniture may be an advantage when it comes to building a vanity.
The best approach to determine whether it is cheaper to buy or build a vanity is to compare the cost of purchasing pre-made vanities with the cost of buying the materials, labour, and other peripherals associated with building a vanity.
Ultimately, the most cost-effective option will depend on the size and style of the vanity, the amount of skill and time available to build it, and the individual’s budget.
How much does it cost to build vanity?
The cost to build a vanity can vary greatly depending on the size and type of vanity being built. Factors such as the type of materials used, the complexity of the design and the contractor or builder used to complete the project can all play a role in the overall price.
On average, the cost of a basic 48-inch bathroom vanity can range from $150 to $1,000, depending on what materials and features you choose. If you decide to upgrade the vanity with more intricate designs, more expensive countertops and fixtures, this can increase the cost to around $3,000 or more.
Additionally, the cost of labor for installation should also be included in the budget, with average labor prices ranging from $50 to $100 per hour, depending on where you live.
How much should I pay to have a bathroom vanity installed?
The cost of bathroom vanity installation can vary depending on the size of the vanity and the complexity of the project. Generally, most bathroom vanity installers charge by the hour, with rates ranging from $50-$100 per hour, depending on the scope of work.
Additional costs may also include the price of supplies, such as lumber, cement, or wall paint. Furthermore, there are usually other necessary tasks for any bathroom renovation project, such as removing existing flooring, plumbing, and drywall repair, that can add to the cost.
Therefore, it would be best to consult a professional contractor who can accurately assess the scope of the project and provide you with an estimate of the total cost for the bathroom vanity installation.
Are Costco Vanities good quality?
Yes, Costco vanities are generally good quality and a great value. They typically come in high-quality materials such as solid wood and engineered wood, as well as quartz countertops. The hardware is usually high-quality and installed in accordance with specifications.
Additionally, Costco typically offers a wide selection of sizes, styles, finishes and designs for their vanities, which can meet a wide range of customer needs. Typically, the cost of the vanity at Costco is lower than from individual retailers, so customers get a great bargain too.
Which brand vanity is best?
Choosing the best vanity brand ultimately depends on individual needs and preferences. Generally, consumers should look for high-quality materials, such as solid wood, bamboo and metal, a sturdy frame, and plenty of storage space.
Additionally, it’s important to consider whether any extra features are important. For example, a vanity with ample countertop and cabinet storage, storage drawers, and soft close hinges and doors may be a better option than one without.
Additionally, if the chosen vanity needs to match existing decor, it may be useful to look for pieces from the same collection or brand. Customers should also pay attention to warranties and technical specs when purchasing a vanity, as these can save money in the long run.
Overall, researching brands, collections and materials and determining which factors are most important will help ensure customers get the best vanity for their needs.
Does a carpenter or plumber install a vanity?
The answer depends on the type of vanity to be installed. Generally speaking, a carpenter or handyman is better suited for installing a vanity with a wooden base. A plumber is necessary to install plumbing fixtures and may be required to install water lines and gas lines if the vanity will include a sink.
If the vanity is a pre-fabricated, store-bought option made of metal, then a carpenter would typically be able to install the piece. However, plumbing may still be involved if the vanity will include a sink.
In any case, it is important to look at the installation instructions that come with the vanity to determine who is best suited to do the job.