Skip to Content

How do you mount a recessed toilet paper holder?

Mounting a recessed toilet paper holder is a relatively easy DIY task that can be completed with a few simple tools and supplies. Before you begin to ensure the surface where the holder is to be mounted is clean and dry.

To begin, you will need to purchase a recessed toilet paper holder. Once you have the holder, trace around the outside of the backplate to mark the wall, then use a level to make sure the lines are straight.

Use a stud finder to check for an anchor on the wall, if there are none, drill a small pilot hole using an ordinary drill bit and, if there is an anchor, use the appropriate drill bit and drill through the mark you have drawn.

You can use a toggle bolt to secure the holder to the wall if needed.

Once you have drilled or anchored the holder the next step is to take the screws that came with the holder and place them through the two holes on the backplate of the holder. Secure the backplate to the wall with the screws and hand tighten them until the back plate is flush against the wall.

Finally, take the toilet paper holder and connect it to the backplate. You may need to use pliers to close the gap between the holder and the backplate before connecting it to the backplate. After securing the holder, you are done and your toilet paper holder is ready for use.

Do recessed toilet paper holders save space?

Yes, recessed toilet paper holders can save space in your bathroom. Unlike those that hang on the wall, a recessed holder is installed into the wall cavity. This adds a streamlined, modern touch to your bathroom décor while still leaving plenty of room to move around.

Recessed holders also keep your toilet paper secure and protected from spills and other moisture, making them ideal for both your home and business bathrooms. Not only are they attractive, but the space-saving versions of these holders help you to maximize the limited space in a small bathroom.

How does toilet paper holder attach to wall?

Toilet paper holders typically attach to walls using screws. Most toilet paper holders come with the necessary screws, but it is important to check if these screws will be compatible with the wall before beginning the installation process.

If the wall is made of drywall, then plastic molly bolts or toggle bolts are often used, while thicker walls may require wood screws. The mounting holes on the back of the holder are typically standardized, but there may be variations depending on the style of the holder.

To install the holder, the screws or bolts should be screwed or hammered into the wall in the designated mounting holes. The toilet paper holder should then be attached to the wall using the screws by lining up the mounting holes in the back of the holder with the screws or bolts and tightening them securely.

Should toilet paper hang over or under?

The debate over whether to hang toilet paper over or under is one of those seemingly endless debates that has gone on for years, with no single answer satisfying everyone. Toilet paper can be hung both ways, but there are several factors that might affect the decision of how to hang it.

The most obvious aspect to consider is personal preference. Some might find it easier, more hygienic, or simply more aesthetically pleasing to have the paper hang over the roll, while others prefer the look of the paper tucked under.

Additionally, the same person might prefer different options depending on the size of the roll, shape of the holder, or other factors.

Another factor to consider is the type of toilet paper used. People who use thin, single-ply toilet paper might find that it hangs better when pulled over the roll, and thicker, multi-ply paper could be difficult to pull over the roll without ending up with a clump.

Finally, the type of holder used might also influence the decision of how to hang the toilet paper. On a traditional holder, the paper is nearly always hung over the roll. But holders with a spring-loaded arm might make it easier to hang the paper under the roll.

Ultimately, the choice of how to hang toilet paper comes down to personal preference and convenience. Experiment with the different possibilities and decide what works best for you.

How are ceramic towel bars attached?

Ceramic towel bars are typically attached to the wall using anchors and screws. The most common way to attach the towel bar is by drilling the mounting flanges into the wall with anchors and screws. When attaching the towel bar, make sure to use the anchors and screws that come with the product, as this ensures a secure fit.

Some ceramic towel bars may come with special adhesive strips that you can use to affix the towel bar to the wall. This method is easier and less invasive than traditional drilling, as no holes are required.

To use the adhesive strips, simply clean the surface of the wall, apply the strips to the mounting flanges of the towel bar, and depress them firmly to the wall. However, adhesive strips may not be as secure as using anchors and screws, so you should use this method with caution.

For best results, check with the manufacturer instructions for your specific towel bar before attaching it to the wall.

How far up from the floor should a toilet paper holder be?

Typically, the height at which a toilet paper holder should be installed is up to personal preference. It is important to keep in mind, however, that the ideal height should be between 26-36 inches. This helps to ensure that the tissue will be accessible to the person using the toilet, regardless of their height.

When mounting the toilet paper holder, the installation should be secure enough to hold the toilet paper without causing damage to the wall when unrolling or tearing the paper. As a general rule of thumb, keep the toilet paper holder at a comfortable height for everyone, especially those with mobility issues who may have difficulty reaching higher up on the wall.

How much space do you need under a toilet for plumbing?

When it comes to installing a toilet, the amount of space necessary for plumbing depends largely on the type of toilet you are installing. If you are installing a floor-mounted toilet, you will need 12” of clearance from the finished floor to the bottom edge of the toilet fixture.

For a wall-mounted toilet, you will need at least 6” of space between the finished wall and the base of the toilet.

In addition to clearance around the toilet, it is important to also consider the space needed for the waste outlet and water supply. The waste outlet needs to be accessible and it must be situated in an unobstructed area.

If the toilet uses a gravity feed, it will need a minimum of 1” clearance around the pipe. If the toilet is pressure assisted, it will require a minimum of 4” of clearance around the pipe.

When installing a toilet, it is important to follow your local building codes and consider not only the clearance for the toilet, but also the space necessary for plumbing. Each of these components is essential for a properly functioning toilet.

Are all toilets 12 inches from wall?

No, not all toilets are 12 inches from the wall. The standard distance between the wall and a toilet is usually between 8-12 inches, so depending on the type of model and installation, the distance between the wall and toilet may be slightly more or less than 12 inches.

For example, corner toilets may have a larger gap due to the angle of the installation, while wall-mounted toilets are typically just 8 inches from the wall. Additionally, different types of toilets may also have specific guidelines for distances from the wall – for example, taller toilets may need to be installed further away from the wall to ensure the proper clearance for the seat and lid.

Therefore, it’s best to check the specific measurements for the toilet you’re considering installing to ensure it will fit in your bathroom correctly.

Should toilet pipe be flush with floor?

Yes, toilet pipes should be flush with the floor. Toilet pipes are usually hidden from the view but they must be properly installed to prevent any leaks from becoming a major issue. Toilet pipes should be level with the flooring so that it is easier to connect the plumbing, as well as to give a better aesthetic to the bathroom.

Additionally, having the pipes flush with the floor ensures that the pipes are better secured and won’t become loose or dislodged. This is important for ensuring that the toilet works properly, and that no water or sewage leaks out.

Installing toilet pipes flush with the floor also prevents any issues with the toilet fixture and helps to keep the bathroom looking neat and clean.

Why is the toilet always next to the shower?

Having the toilet next to the shower is beneficial for both practical and convenience reasons. Having the toilet so close to the shower is much more hygienic because the water from the shower helps to flush the bacteria away from the toilet.

This ultimately reduces the risk of toxic bacteria or mold building up, helping to keep your bathroom clean. Having the toilet and the shower in close proximity is also very convenient for a number of reasons.

It means that users can go from showering directly to using the toilet without having to cross the rest of the room to do so. This also helps to minimise water wastage because users can turn the shower off and go to use the toilet directly.

Additionally, if you have a small bathroom, having the toilet and the shower together conserves space, leaving room for other items, such as a sink, vanity and storage.

How far can you run a toilet without a vent?

You typically cannot run a toilet without a vent. Toilets need proper venting to ensure that waste is expelled from the plumbing system correctly and effectively. Without a vent, there will be an inadequate amount of water entering the drain pipes and the water and waste will remain in the toilet and drain pipes, respectively.

This can cause clogs, unpleasant odors, slow draining, and other plumbing problems. Additionally, without the proper venting, air will be unable to enter the system and replace the material within the pipes, resulting in a water-logged system.

Basically, without the vents, the plumbing system will not work as expected and waste material will not be able to be expelled adequately.

What is the diameter of a toilet paper holder?

The diameter of a toilet paper holder varies depending on the type of holder. For example, a single, spring-loaded roller toilet paper holder typically has a diameter of 3/4 inch. On the other hand, a double, spring-loaded roller toilet paper holder typically has a diameter of 1 1/8 inch.

If you are looking for a freestanding toilet paper holder, the diameter may be different depending on the specific product. For example, a freestanding toilet paper holder with a stand typically has a 4 1/2 inch diameter base.

On the other hand, some freestanding toilet paper holders are made to be mounted to the wall and may have a diameter ranging anywhere from 4 to 8 inches.

How do you tighten a toilet paper holder with hidden screws?

Tightening the toilet paper holder with hidden screws can be a bit tricky and will require some patience. The first step is to locate the screws that are hidden beneath the decorative cap. You may need to use a flathead screwdriver to remove the decorative cap to access the screws.

Once the screws are located, you can use a flathead or Phillips screwdriver to loosen or tighten the screws as necessary. You may need to add a drop of lubricant to the screw threads to make it easier to loosen or tighten.

Be careful not to overtighten the screws as this can damage the toilet paper holder. Once tightened, replace the decorative cap, and your toilet paper holder should now be securely tightened.

How do you make a template around a toilet while laying tile in the bathroom?

When laying tile in the bathroom, it’s important to create a template around the toilet before applying the adhesive and full tiles. To make the template, start by marking the toilet bowl location on the floor and use a square to draw a circle where the outside of the fixture should enter the tiled area.

Next, measure the sides of the toilet base and make corresponding marks in the middle of the square to define the sides of the rectangular tiles that will go around the fixture. Use a tape measure to double-check all measurements and to ensure the sides are even.

When making the template, mark out a border around the edges of the possible tile area, but leave some space on the edges for cutting. Don’t forget to make a small template for the sides of the toilet, as well.

To make the sides fit snugly, cut the sides first. Use good-quality concrete or glass tile nippers to do this. Fit these pieces into the template and make sure they fit properly before proceeding to the larger tiles.

For cutting around the toilet in the main area, you can use a tile saw for the straight cuts, and nippers for the curved ones. Use spacers to mark the grout line and avoid overlapping the tiles. Once the cutting and fitting is complete, clean up any glue or mortar that may have spilled, and then apply the adhesive.

Place the full rectangular tiles and use a trowel to press them into the adhesive and get a nice finish. Finally, smooth out the grout lines, let the grout dry, and your template is complete.

How do you hide the gap between a bathroom vanity and a wall?

The best way to hide the gap between a bathroom vanity and a wall is to caulk it with a waterproof sealant. Start by washing away any dirt or other debris from the crack. Then prepare the area by using a putty knife to scrape away any paint, varnish, or wallpaper in the gap.

Once thoroughly cleaned, apply an adequate amount of caulk that is approved to use both inside and around bathtubs and showers. Run a caulk gun the whole length of the gap, pressing firmly and moving slowly so that the caulk fills the entire area.

Then use a wet finger to smooth the caulk and give it a finished look. Finally, wait for the caulk to dry completely before painting it to match your bathroom decor.