Skip to Content

How do you move a hot tub with a dolly?

Moving a hot tub with a dolly requires quite a few steps and should be done with help from another individual to make sure the job is done safely. Here are the steps:

1. Begin by emptying and cleaning the tub, including removing all hoses and fittings, then covering the hot tub with plastic wrap or a specially fitted tarp.

2. Disconnect the electrical connection and wiring attached to the hot tub.

3. Wrap the hot tub in moving blankets to protect it from any bumps.

4. Secure the hot tub. Connect two straps under the tub frame, spaced evenly apart and padded, to reduce shaking and jostling.

5. Bring the dolly over to the hot tub, and have your helper place the dolly underneath the hot tub. Make sure your dolly has four swivel caster wheels, as they will make manœuvering easier.

6. Position the straps over the dolly, near the center of the hot tub.

7. Check the balance of the load to make sure it’s not tipping over, then slowly and carefully move it to the new location.

8. When you get to the new location, make sure your working area is clear and place wooden blocks outside the hot tub’s feet.

9. Unload the hot tub from the dolly, and slowly slide the tub off the dolly onto the blocks.

10. Remove the straps and the blankets, and make sure to reconnect the electrical connection and wiring.

Can you lift a hot tub by hand?

No, it is not recommended to lift a hot tub by hand, as it is likely too heavy for one person to safely handle. Hot tubs can weigh anywhere from 500-2,000 pounds, depending on the make and model. It is best to use appropriate lifting equipment or specialist lifting staff to move a hot tub into the desired position.

Professional movers and lifting equipment can safely and efficiently lift it into place in order to avoid damage or back strain. Not only is it physically demanding to lift a hot tub by hand, but it is also dangerous as the weight is too much for the average person to manage.

It is important to also consider access points and pathways when releasing a hot tub, as some garden designs might not be suitable for a hot tub to be maneuvered.

How heavy is a hot tub to move?

The weight of a hot tub can vary greatly depending on the size, type, and material. Generally, they range from 400 to over 1,700 lbs. For example, a typical 5-person hot tub with a plastics shell may weigh up to 400 lbs, while an 8-person hot tub made with acrylic or cast iron may weigh over 1,000 lbs.

If you’re planning to move your hot tub backyard, consider hiring a professional for a safe and secure transport. They will have the necessary tools, hardware, and expertise to make sure the job is done properly.

Additionally, it’s recommended that you disable all electrical hookups from the spa before beginning to move it.

How much does a 6 person hot tub weigh?

A 6 person hot tub generally weighs between 2,000 – 2,500 pounds when it is filled with water. This weight will vary depending on the size and type of the hot tub. Inflatable hot tubs need to be filled to their maximum capacity of 250 gallons of water to get the expected weight.

For comparison, an average-sized 7ft x 5ft x 40-inch in-ground hot tub holds approximately 1,100 – 1,200 gallons of water and would weigh approximately 8,000 – 10,000 pounds.

How do you pick up a hot tub?

Picking up a hot tub is no easy task and should not be taken lightly. It is important to evaluate if the hot tub should be picked up manually or with a vehicle.

If the hot tub is a lightweight type, it can be carried by two or more people depending on the size and how robust the individuals carrying it are. It is very important to ensure the people who are carrying the hot tub can do so safely and are not at risk of injury.

If the hot tub is made of heavier material, a vehicle may be the best choice. It is important to determine what will be the best mode of transportation for the specific hot tub measurements. A pickup truck is usually best for this purpose, as it can carry a full-size hot tub without collapsing or being damaged.

To ensure safety, hire a professional to move the hot tub if needed. Professional movers can properly load and secure the hot tub in the vehicle, as well as move it onto the ground at the destination.

Professional movers are usually specially trained in picking up hot tubs, and have the necessary safety equipment to do it quickly and safely.

With the proper precautions, picking up a hot tub is a relatively straightforward process. It is important to ensure that the right method of transport is chosen, as well as to consider safety first.

How many people does it take to lift a hot tub?

It depends on the size and weight of the hot tub. Generally, 8-10 people can safely lift a standard tub that weighs around 500-700 pounds. For lighter tubs such as inflatable hot tubs, 2-4 people is typically enough as they are much lighter and easier to maneuver.

For heavier hot tubs, it is important to make sure that all people participating in the lift are in good physical condition and that safety precautions are taken. This includes having everyone wear suitable clothing and footwear, ensuring the area is free of any concerning obstructions, and carefully distributing the weight of the tub between all those carrying it.

It is also important to avoid any sudden movements and to always lift the tub from the bottom edges, never from the top.

Is moving a hot tub easy?

No, moving a hot tub is not easy. It may seem like a straightforward process, but there’s actually a lot of work involved. Hot tubs are typically heavy and awkward to move, as they are large and filled with water.

In addition, they must be carefully disconnected from power, the water drained, the old location cleaned up, and the tub carried through possibly tight doorways or hallways. Furthermore, special care should be taken not to damage the tub, so assistance may be needed to move it.

If a crane or special equipment is required for the move, extra costs may be incurred as well. To properly and safely move a hot tub, it is best to hire a professional to do the work.

How do people get hot tubs in their backyard?

People seeking to get hot tubs in their backyard typically start by doing research on the features and designs they want and then seeking out a reliable installation service. First, they must make sure that the hot tub they select is the right size for their available space.

They must then ensure that the hot tub can be properly installed with existing electrical and drainage systems. Finally, they will need to secure a hot tub cover in order to safely enclose the tub when it is not in use.

Once these preliminary steps are taken, potential hot tub owners usually find an experienced installation service that can not only deliver and install the hot tub, but also provide the necessary maintenance and supplies needed for the product’s upkeep.

Many hot tub installation companies provide services to ensure the hot tub is securely installed, the proper electrical components are in place, and the necessary filling, draining, and heating systems are connected and functional.

Additionally, these services may offer in-home appointments to help potential customers with their decision-making process, allowing them to make an informed purchase and get the service that best meets their needs and budget.

Is it worth it to move a hot tub?

Whether it is worth it to move a hot tub depends on several factors. Technically, moving a hot tub is possible and is the same process for a regularly used hot tub or one that has not been used in a long time.

Usually, it requires disassembling the hot tub, removing it from its current location, and reassembling it once it is in its new location. This process is best done by a skilled individual who knows how to handle heavy equipment.

The primary cost associated with moving a hot tub is the cost of labor. Depending on the size and weight of the hot tub, as well as the distance it must be moved, labor costs can range from a few hundred dollars to several thousand dollars.

Additionally, if the hot tub is being moved far away, it may be necessary to rent a truck to transport it. Finally, if there are any issues with the wiring or plumbing of the hot tub, the cost of those repairs should be factored in as well.

Therefore, it is important to consider the cost of both labor and potential repairs before deciding if moving a hot tub is worth it. In some cases, it may be more cost-effective to purchase a new hot tub than to move an existing one.

However, if moving the hot tub is a priority then hiring the right professionals and doing some research can help make the process easier.

How do I move a hot tub out of my backyard?

Moving a hot tub out of your backyard can be a time-consuming and labor-intensive task, but it can be done with the right preparation and equipment. Here are the steps you should take to move a hot tub out of your backyard:

1. Drain the hot tub completely. You’ll need to unplug the hot tub first, then use a garden hose to drain out all water inside the tub.

2. Disassemble the hot tub and remove any loose parts. This might include the control box, filter, and other related parts.

3. Secure the hot tub with a tarp and move it to the exit point in your yard. A couple of people should each take hold of the tarp, wrapping it around the hot tub and lifting it up. Be careful lifting the hot tub so as not to damage any surfaces.

4. Once you get the hot tub out of the yard and place it in the truck to be transported, you can use the truck or other large vehicle to carefully drive the hot tub away.

5. Finally, the destination is reached, and you’ll have to reassemble and fill the tub with water. It is recommended to fill the tub with clean, filtered water and check all the levels.

With the proper preparation and assistance, you can move a hot tub out of your backyard. Good luck!

Can a hot tub be transported on its side?

Yes, a hot tub can be transported on its side. Doing so can be convenient if you need to move it through a gate, which is narrower than the hot tub’s width. When moving a hot tub on its side, it is important to make sure that it is properly secured and that it is not exposed to unnecessary amounts of sunlight, as this can cause damage to the hot tub’s components.

Additionally, if the hot tub is filled with water, it should be drained before transporting it on its side, as it can cause the hot tub to become unbalanced during transportation. It is recommended that you work with professionals to move your hot tub, as they have the proper equipment and experience to safely maneuver it.

Can you roll a hot tub to move it?

No, it would be difficult and potentially dangerous to try to roll a hot tub to move it. Hot tubs are generally quite large and heavy, so it would take a lot of strength to move them. Additionally, their tub frame could become damaged if it were rolled over even a small obstacle.

It is much better to either purchase a dolly specifically designed to move hot tubs, or enlist the help of professionals who know how to safely move hot tubs to the desired location.