Using a plunger is the most common way to plunge a toilet by hand. All you need is a plunger and a few simple steps to get the job done. First, make sure the toilet bowl is at least half-full so that the plunger has a better seal when placed into the toilet bowl.
Next, fill the plunger cup with some water. You can also wet the rubber cup on the plunger to create a better seal. Third, place the plunger into the toilet bowl so that the rubber cup creates an air-tight seal with the sides of the bowl.
Finally, pump the plunger up and down until you feel the clog moving or you hear the gurgling sound of the water in the bowl draining away. Once the toilet is plunged successfully, empty the remaining water in the cup down the drain and flush the toilet one or two times.
What can I use to plunge my toilet if I don’t have a plunger?
If you don’t have a plunger, you can use a few other household items to unclog your toilet. The first option is to use vinegar and baking soda. Begin by pouring two cups of baking soda into the toilet bowl, followed by two cups of white vinegar.
After allowing the fizzing bubbles to work their magic for a few minutes, boil a pot of water and then pour it directly into the clogged toilet. This should have dislodged most of the blockage, in which case you can now flush the toilet.
If this doesn’t work, a wire coat hanger can also be used to clear the blockage. Untwist a hanger, straighten it out, and then fashion a hook at the end. Insert the hook end of the hanger into the toilet and see if you can fish out anything clogging the drain.
The last option is to use a toilet auger or a plumber’s snake. This is a flexible, long cable with a curved end that can be inserted into the toilet to plunge out the blockage.
What do plumbers use to unclog toilets?
Plumbers typically use augers or plungers to unclog toilets. An auger is a plumbing tool used to dislodge clogs deep in the drain line. It is a steel cable equipped with a crank at one end and a corkscrew-like auger at the other.
The auger is fed into the toilet and through the drain pipe into the clog. As the auger is twisted, it breaks apart the clog. Plungers are also used to remove clogs from toilets. Plungers are typically bell-shaped with a narrow, flexible cup at the base which is inserted into the toilet.
By creating a partial vacuum and then pushing air into the drain, the plunger can push the clog out of the toilet.
Is there a trick to unclogging a toilet?
Yes, there is definitely a trick to unclogging a toilet. The easiest and most common method is to use a plunger. Be sure to plug other drains in the bathroom so that you can create a seal and maximize the pressure.
Place the plunger in the drain and use strong, steady suction to break apart any clogs. You may need to repeat this process a few times. If this doesn’t work, you can also try using an auger, which is a long, flexible rod with a corkscrew on the end.
Feed it into the pipe until you reach the obstruction, then turn it in both directions to break up the clog. Finally, if all else fails, you can try a chemical cleaner, but be sure to use one that is specifically made for toilets.
Follow the manufacturer’s instructions carefully, and use precaution when handling any chemicals.
Does pouring hot water in a toilet help unclog it?
If you have a clogged toilet, pouring hot water into the bowl may be beneficial in dislodging the blockage. Pour a bucket of hot water — about two gallons — into the bowl, allowing it to fill and sit for five minutes.
If the clog isn’t flushed away, repeat the process two or three more times. The hot water helps soften any items clogging the toilet, thus making them easier to remove. If the hot water doesn’t unclog the toilet, use a plunger to break up whatever is clogging the toilet.
Make sure to apply a generous amount of lubricant (such as dish soap or petroleum jelly) to the end of the plunger and to the outside of the toilet bowl. Push the plunger up and down to create suction that should help to break apart the clog.
After using the plunger, pour in one more bucket of hot water and allow it to sit for five minutes. If the clog persists, you may need to call a professional plumber.
What is the strongest thing to unclog a toilet?
The strongest and most effective thing to unclog a toilet is a plumbing snake. A plumbing snake is a long flexible metal rod with a spiral end that can be inserted down the toilet pipe to force the clog out.
Depending on the severity of the clog, a plumbing snake may be all you need. If the clog is quite stubborn, it may be necessary to use a manual or power auger to unclog the toilet bowl. The auger has a longer and thicker cable with a cutting head that is ideal for cutting through tougher clogs.
Augers are more expensive and require more skill to use, but they are more effective for the more stubborn clogs.