Removing a Delta lift and turn tub drain is a relatively straightforward process. To start, you will need to gather some tools, namely a flat-head screwdriver and some adjustable pliers. If your Delta lift and turn tub drain has a toe-touch mechanism, you will need to first use the flat-head screwdriver to remove the decorative cap from the center of the stopper.
Push up on the stopper, and then use the pliers to loosen and remove the locking nut. After the locking nut is off, you will be able to unscrew the drain from the plumbing. To finish the process, use the screwdriver to pry away the drain gasket from the drain assembly.
Make sure to discard the old gasket before putting a new one on the drain. Once the gasket is in place, attach the drain plumbing back to the drain and secure the locking nut. Finally, reattach the decorative cap of the stopper and make sure it is securely in place.
How do you remove the tub plug that twists up and down?
Removing a tub plug that twists up and down can be done by following these steps:
1. Grab a flathead screwdriver and place it on the underside of the tub plug.
2. Use the screwdriver to slightly turn in a counterclockwise direction until the plug is loosened and moves slightly up and down.
3. Once the plug is loosened, use your hands to unscrew the plug by twisting it in a counterclockwise direction until it is completely removed.
4. Place a small bucket or bowl underneath the plug for any water that may come out.
5. Clean out the hole of any dirt, debris or built-up grime that may inhibit the new plug from being installed properly.
6. Once the hole is cleaned, place the new plug into the hole and twist in a clockwise direction until it is secure.
7. Test the plug by turning the stopper to make sure it is secure and functioning properly.
What are the different types of bathtub drain stoppers?
Each designed for different purposes and varying levels of sealing ability.
The first type is a lift-and-turn stopper, which is activated by a knob located on top that lifts and turns to create a seal. These drain stoppers are generally the least expensive and simplest type of drain plug.
The second type is the pop-up stopper. This style utilizes a knob that is generally on the top of the tub, connected to a stopper within the drain by linkage. Water pressure pushes the stopper up when it is desired to be released, and the knob is used to seal the drain when required.
The third type of drain plug is called a trip-lever stopper. These utilize a long handle located near the outside of the bathtub that lifts the stopper inside of the drain and closes it.
The fourth type of bathtub drain plug is a toe-touch, or push-pull, stopper. The plug is opened and closed via a button or knob located beneath the tub’s surface, which is activated by using your foot or hand.
The fifth option is an electronic bathtub drain plug. This type of drain stopper uses a motorized actuator to actuate the plug, which is available with both manual and remote control options.
Finally, there is the plunge-lock stopper, which is a more traditional type of bathtub drain stopper, and requires the user to manually push the plug up and down. This style is generally used in older homes and can be tricky to install correctly.
Are bathtub drain stoppers universal?
No, bathtub drain stoppers are not universal. Different models and types of bathtubs may be designed to take different types of drain stoppers, so there is no one-size-fits-all solution when it comes to choosing a drain stopper for a bathroom.
When purchasing a drain stopper for a bathtub, it is important to ensure that the stopper is compatible with the specific make and model of the bathtub. Additionally, the material from which the drain stopper is made should be considered.
Many modern models come in either plastic or stainless steel varieties, although older models may have drain stoppers with different types of finishes. Compatibility of the drain stopper with the bathtub is essential in order to ensure proper function.
Other factors, such as the height and type of overflow drain, should also be considered before selecting a stopper. If in doubt, consulting an expert or referring to the product manual and website of the bathtub manufacturer is recommended.
What is the easiest way to remove a pop up tub stopper?
The easiest way to remove a pop up tub stopper is to first unscrew the knob screw that is located on top of the stopper. Once the screw has been removed, you should be able to lift the stopper out of the drain by pulling straight up.
Some stoppers are attached to a linkage assembly underneath the tub, so if you’re having difficulty removing it, you may need to remove the linkage before you can take out the stopper. To do this, simply follow the instructions that are included with the linkage hardware.
If you’re still having trouble removing the stopper, you can try using a pair of pliers to loosen the linkage. Once you’ve successfully removed the stopper, you can replace it with a new one.
Can you replace a pop up plug with a normal plug?
Yes, you can replace a pop up plug with a normal plug. Pop up plugs require a single sink hole, but a normal plug can be secured in the drain with a locknut. To replace a pop up plug with a normal plug, you will need to remove the stopper and associated linkage hardware.
Then you will need to disassemble the connecting hardware that holds it in the drain. Once this is done, you will be able to thread the normal plug into the drain and secure it with a locknut. However, be aware that a normal plug may not fit if your sink has a significantly larger sink hole than what is needed for a pop up plug.
In this case, it may be necessary to purchase a plug converter. Additionally, make sure to properly seal any parts or seals that may have become damaged during installation of the new plug, to prevent drying out or leaking in the future.