Skip to Content

How do you remove an RV toilet?

Removing an RV toilet is a relatively straightforward process, though it does require some care to ensure that it is done properly. First, ensure that the water and electricity have both been shut off to the toilet.

Then, open up the toilet compartment and use a wrench or pair of pliers to detach the water supply line from the bottom of the toilet. Once detached, locate the bolts at the floor of the compartment which hold the toilet in place.

Then use a socket or wrench to remove the bolts. After the bolts have been removed, the toilet should be able to be easily lifted away from the compartment, though it may be necessary to use a bit of force to remove it.

Once removed, the remaining connections to the water supply and electricity should also be removed, before reattaching them to the new toilet. Finally, the new toilet should be placed back into the compartment and the bolts reattached to secure it in place.

Can I remove a toilet myself?

Yes, it is possible to remove a toilet yourself, but it requires some knowledge and preparation. You should always make sure to turn off the water supply before disassembling anything. When uninstalling a toilet you will need to start by loosening and removing the nuts from the bolts that secure the toilet to the floor.

Next, you will need to use a plunger to release any remaining water in the tank and the bowl for easier handling. After this, the tank can be moved aside and the toilet bowl will be unscrewed and lifted off of the floor flange.

Depending on the age of your toilet, you may also need to take extra care in dealing with the wax seal and bolts, as these may be wedged tight with rust and grime buildup. Lastly, you will need an appropriate-sized socket wrench or adjustable wrench to disconnect the water supply line and a bucket or towels to help in disposal of any spilling water.

How to replace a toilet in a camper?

Replacing a toilet in a camper can seem daunting, but it’s really a fairly easy job. First, you’ll have to buy the right toilet for your camper. You typically need a low-profile, “short” toilet, particularly if you have limited space.

To make sure that you get the right size and model, remove the old toilet and take it with you when you buy the new one. Before you do any actual replacing of the toilet, it is important to turn off the water supply valve and flush the toilet to release any residual water.

Next, disconnect the water supply pipe from the old toilet by loosening the slip nuts that secure it to the toilet base. Once the pipe is disconnected, you can remove the old toilet, which can be done by unscrewing whatever is holding it down to the floor.

After the old toilet is removed, the flange the toilet was seated on can be inspected to see if it needs repairing.

Once the flange is in good condition, the new toilet can be installed. First, attach the water supply pipe to the new toilet. Next, place the bolts that were removed from the old toilet in the flange, then place a few washers on each bolt.

Place the new toilet on top of the flange, making sure that the two bolt ends stick through the two small holes in the bottom of the toilet. Secure the bolts in place with the washers and nuts provided with the new toilet.

The last step is to attach the part leading to the water supply pipe to the back of the toilet. This part usually slides onto the pipe, and you will have to tighten the attachment screws into place. Once this is done, open the water supply valve and test the toilet.

Can one person lift a toilet?

Yes, one person can lift a toilet, although it will likely require a lot of effort. For lighter toilets, it is possible for one person to lift it themselves. This is more achievable with a traditional toilet that is made of porcelain, as these tend to be lighter than modern ones.

Make sure to utilize good ergonomics when attempting to lift the toilet, including using a wide, stable base and proper posture. If the toilet is too heavy to lift alone, enlist the help of another person and use a dolly or a tool specifically designed to move toilets such as a ‘Toilet Mover.

’ When lifting a toilet, wear protective gloves and make sure to never lift it by the inside of the bowl.

What tools do I need to remove a toilet?

To successfully remove a toilet, you will need an adjustable wrench, a pair of tongue-and-groove pliers, a screwdriver, a sponge, and a bucket.

Start by turning off the water to the toilet by turning the shut-off valve clockwise, and flushing the toilet to make sure all the water is gone from the tank and bowl.

Using the adjustable wrench, carefully remove the supply line from the shut-off valve and set aside. Then use the pliers to remove the bolt caps, lift the toilet and disconnect the bolts connecting the toilet to the flange.

Once you’ve removed the bolts and disconnected the supply line, simply lift the toilet straight up and out of the bathroom.

Finally, use the sponge and bucket to clean up any remaining water and debris around the flange. Once you’ve successfully removed the toilet, make sure to properly dispose of the old toilet in accordance with local regulations.

Is it hard to replace RV toilet?

Replacing an RV toilet can be a challenging task. It requires certain plumbing knowledge and the right tools to do it. Additionally, as an RV toilet is frequently trapped in a tight hold with walls and cabinets, it can be difficult to access and remove.

The exact process of replacing an RV toilet will depend on the type of RV and its toilet model. Generally, you should start by disconnecting the water lines and the pump before you proceed to remove the toilet and the holding tank.

After that, you can install the new toilet flush handle, connections, and drain hose. Finally, you should re-connect the water lines and the pump before testing the new toilet.

It is highly recommended that prior to attempting any repair or maintenance, you should refer to the vehicle manual or a qualified service provider to ensure that you follow the correct procedures. Depending on the complexity of the job, it might be best to hire a plumber to do the job.

How much does it cost to replace a toilet in an RV?

The cost of replacing a toilet in an RV varies depending on the type of toilet, installation costs, and the materials used. A standard RV toilet can cost anywhere from $100-$500, not including installation.

Premium toilets, such as porcelain models, can cost up to several thousand dollars. Additionally, installation costs will vary depending on the installation process involved and the skill level of the installer.

The components needed for an RV toilet installation include a holding tank, sealants, new shut-off valve, and drain hose. Generally, these components range from about $75-$225, depending on the quality and amount you purchase.

All in all, the total cost of replacing a toilet in an RV could be anywhere from $175-$2,500 or more.

Can you take a Thetford toilet apart?

Yes, you can take a Thetford toilet apart. To do this, you will need to first turn off the water supply to the toilet and then disconnect the water supply hose from the valve. Next, you will need to remove the toilet bowl screws that secure the bowl to the base.

Once these screws are removed, you will be able to remove the toilet bowl from the base and access the internal components of the toilet. Unscrew the bolts that secure the base to the floor and remove the base from the unit.

Then disconnect the seals from the back of the toilet and remove the flush valve. Depending on the model of the Thetford toilet, there may be other components that will need to be removed and disassembled.

Carefully note the order and placement of all parts for easy reassembly.

Can you replace a Thetford RV toilet with a Dometic RV toilet?

Yes, it is possible to replace a Thetford RV toilet with a Dometic RV toilet. The two models have different shapes, so it is important to take precise measurements before making a purchase. Also, Dometic models can have different features, such as length, width, bowl height, and type of flushing mechanism.

Therefore, it is important to select the RV toilet that is compatible with the model of your recreational vehicle before replacing the existing toilet. Additionally, installing a Dometic RV toilet will require a few extra components such as a water supply adapter, a base plate, and a seal kit.

Lastly, you may also need a few tools such as a wrench, a screwdriver, and a drill to complete the installation.

How do I replace my RV toilet with a regular toilet?

Replacing your RV toilet with a regular toilet requires following some steps in order. First, make sure the RV toilet has been completely and properly emptied. If the toilet is a pneumatic model, disconnect the air and remove all parts of the toilet, including the bowl and base, as well as hoses connecting to fresh and grey water tanks.

If your toilet is a gravity-fed model, there will be only one hose to disconnect from the fresh water tank. Once all the pieces have been disconnected, you can then remove the toilet from the RV floor.

Next, you can then prepare for installation of the new toilet. Measure the area where you’ll be installing the toilet and purchase a new toilet that fits the area. Make sure to get a base that fits the area as well.

Also, make sure to check the position of the water inlet pipe and plan the toilet’s installation accordingly. You will also need to check the water pressure of the RV and adjust the valve if it is too high or low.

Once everything is in place, you can then begin the installation. Connect the water inlet pipe to the toilet bowl, then slide the bowl with the connected parts into the base by pushing it in firmly. Use appropriate mounting hardware to secure the toilet to the RV.

If the bolts are too long, use washers to adjust the height so that the toilet is level with the floor. After the toilet is secured, work out the connections to the RV’s water system by attaching the hoses.

For gravity-fed systems, you need to attach the hose from the water tank to the inlet pipe. A water supply stopvalve needs to be connected for the pneumatic system.

Once all the connections have been made, turn on the water and check for any leaks. Then, you can use a caulk material to seal up any gaps. Once everything is sealed, you can sit test the toilet and make any adjustments as necessary.

Finally, if all adjustments have been made and the toilet is working correctly, you can turn off the water and flush the toilet to clear the system.

By following these steps, you should be able to successfully replace your RV toilet with a regular toilet.

What is the difference between Thetford green and blue?

The difference between Thetford green and blue toilet chemicals are in their composition and use. Thetford Green toilet chemicals are biodegradable and contain a blend of chemical ingredients that break down organic waste, control odors and prevent sludge build-up in sewage tanks.

They also help to keep the toilet bowl and surrounding area cleaner. Thetford Blue toilet chemicals are also biodegradable, but they are designed to work in combination with a pH neutral liquid cleaner.

These chemicals help to remove tough stains and prevent build-up in holding tanks. They also help to keep the toilet bowl and the surrounding areas clean and sanitary. Whereas the green chemicals are primarily designed to break down organic waste, the blue chemicals are formulated to help with cleaning and preventing build-up in holding tanks.

Why is my Thetford toilet constantly flushing?

The most likely cause of a Thetford toilet constantly flushing is a faulty flush valve. The flush valve is a one-way valve that allows water to go through it when flushed. When the flush valve becomes clogged or broken due to wear and tear over time, it can cause the toilet to constantly flush.

It is also possible that there is an underlying issue with the seals and gaskets within the toilet that may be contributing to the problem. If the flush valve is indeed faulty, you will need to have it replaced with a new one.

Additionally, you should ensure that all seals and gaskets within the toilet are in good condition and not worn out as this could also be causing the toilet to flush constantly.

How do you remove a toilet that is glued to the floor?

Removing a toilet that is glued to the floor can be a tricky process. Before attempting the task, it is important to ensure that the water is shut off and the tank is empty. Then, use a utility knife or razor blade to cut the caulk seam where the bowl meets the floor.

Once the caulk has been removed, use a putty knife or screwdriver to pry up the toilet from the floor. It is important to work slowly, as the toilet may be more securely attached to the floor than it appears.

After the toilet has been freed from the floor, disconnect the flange from the waste line and tank from the water supply in order to completely remove it from the area.

Are RV toilet flanges threaded?

Yes, RV toilet flanges are threaded. This means that they have a spiraled grove that helps hold the pipe and fitting in place. Threaded flanges are most often used with plastic and metal pipes, making them perfect for RV toilet fixtures.

The threads on the flanges allow for a secure connection between the flange and the pipe, preventing leaks and preventing the toilet from becoming loose over time. RVs are often exposed to rough roads and bumpy terrain, so having a secure and tightly fitted toilet flange is essential for avoiding leakage and other issues.

Additionally, the threads also help line up the pipes to create a proper level for the toilet flange, avoiding the toilet from rocking and being uncomfortable or unsecured.

Can you put a normal toilet in a RV?

Yes, you can put a normal toilet in a RV. The process of installing the toilet is much the same as it is for your home bathroom. You will first need to make sure you have the proper plumbing supplies in order to connect the toilet to the waste water tank and water lines for flushing.

You will need to follow the instructions that come with the toilet in order to properly install and seal it in place. Once the toilet is in place and all the plumbing is connected, you should flush it several times to make sure everything is working properly.

With proper installation and maintenance your RV will be outfitted with a normal toilet just like you would find in any home bathroom.