Skip to Content

How do you update a bathtub without replacing it?

Updating a bathtub without replacing it is possible with several options that are much more cost-effective than a full replacement. You can use epoxy or acrylic painting kits to paint the existing bathtub in any color you choose, without needing to fully remove it.

Krylon also offers a ‘makeover’ kit that can be used to refinish and repair your existing bathtub. Another option is to use a bathtub liner – a moldable acrylic material that covers the entire tub, making it look and feel like a brand new tub.

For a more permanent fix, consider reglazing the tub, where a technician will use an industrial-strength bonding agent to fix any chips or cracks, then apply a glossy finish to the surface. To give your bathtub a more modern look, install new plumbing fixtures and hardware, such as towel bars and faucets.

These fixtures come in a variety of finishes and styles, allowing you to completely customize the look to fit your bathroom’s decor. Finally, you can add accessories such as a bathtub caddy, shower curtain, and a bath mat to further update the look of your tub.

How can I make my old bathtub look new again?

It is possible to make your old bathtub look new again. The best way is to give it a thorough deep cleaning. Start by removing any visible dirt and buildup from the surface of the tub. Then, use a mixture of warm water and dish soap to scrub the entire tub, paying extra attention to the areas around the faucets and drains.

Once the tub has been scrubbed, use a cloth or sponge to rinse the tub thoroughly with clean water.

In addition to a deep cleaning, you may also want to consider refinishing your old tub. This involves sanding down the surface to remove any old stains or discolorations and then applying a fresh coat of epoxy or ceramic paint over the entire tub.

You can rent or purchase a refinishing kit from your local hardware store. It’s important to follow the instructions provided in the kit carefully to ensure a successful refinishing job.

Finally, to keep your bathtub looking new, it is important to dry off the tub after every use and to use a non-abrasive cleaner regularly to remove any soap scum or other buildup. Following these steps should help keep your bathtub looking fresh and new.

Is it cheaper to resurface or replace a bathtub?

The answer to this question depends on the condition of the bathtub, the cost of the materials, and the amount of labor required. Resurfacing a bathtub is usually the more cost-effective solution, as it involves refinishing the surface, which can range in cost from $300-$600, but this can vary depending on the bathtub size and the materials used.

It is usually a cheaper option than replacing a tub, as replacing a tub typically costs anywhere between $1,000-$3,000, not including installation. However, if the tub is too damaged to resurface, then replacing it may be the only option.

Also, consider any potential remodeling costs if you are replacing your old bathtub. In that case, replacing the tub may be the more cost-effective solution. The best way to determine which option is best for you is to get several quotes from local plumbers or bathtub refinishing companies and compare the costs.

What can I use to cover my bathtub?

There are a variety of different products on the market that you can use to cover your bathtub. If you’re looking for something temporary, you could use a shower curtain or a shower liner. You could also opt for a bathmat or bath rug, which are usually made from absorbent materials like cotton or microfiber.

Alternatively, you could buy a vinyl or rubber bathtub cover, which slip over the tub and provide a waterproof barrier. For a more permanent option, you could install a bathtub liner or a sectional bathtub wall, made from acrylic or some other waterproof material.

These options provide a more complete and seamless look and can even add additional protection against water damage.

How much does it cost to put a cover over a bathtub?

The cost of a cover for a bathtub can vary significantly depending on several factors, such as the type of material used, the complexity of installation, the size of the bathtub, and the existing condition of the existing fixtures.

A basic acrylic bathtub cover can range from $50 to $200, while a fiberglass cover with a custom-fit design can range from $600 to $1,200. You can also find a professionally-installed acrylic cover for under $100.

For a more luxurious feel, a custom-made stone or marble bathtub cover will cost between $2,000 and $4,000. In addition, the cost of installation can range from $200 to $2,000, depending on the difficulty of the project.

Overall, if you want to install a cover over your bathtub, the average cost typically ranges from $200 to $3,000. It’s important to do your research before making a purchase and make sure that you find a cover that best suits your budget and needs.

What do professionals use to refinish bathtub?

Professionals use several different types of products to refinish a bathtub. Typically, they will use a type of epoxy paint or coating to refinish the bathtub. This type of paint or coating is often made of a mix of polyester or polyurethane resin and a catalyst that hardens when it is exposed to air.

The coating will cover any small chips or cracks in the tub’s surface and can help to protect the tub from further damage. Additionally, a professional will apply a coating of primer, sealer, and top coat over the refinishing layer to ensure that the bathtub is stronger and more durable.

Finally, professionals will often finish the job with a wax or enamel sealant for additional protection.

Does refinishing a bathtub last long?

Refinishing a bathtub can provide a longer lasting result than replacing your tub since, on average, it can last 10+ years with proper maintenance, whereas new tub installation might only last about 8 years.

The process of refinishing a bathtub involves thoroughly cleaning and acid-etching the surface, filling in any cracks or chips and then applying a primer before adding a protective glaze and sealant.

To extend the lifespan of the refinish, it is important that proper care and maintenance is taken. This includes regularly cleaning the tub with non-abrasive cleaning agents, avoiding harsh chemicals and not using too hot of water when cleaning.

Additionally, it is important to ensure that the sealer is applied on a regular basis following manufacturer’s instructions and to avoid scratching the surface. By taking proper care of your tub over the years, it can last much longer than 8 years.

Is it worth refinishing a bathtub?

Refinishing a bathtub is an affordable way to update the look of an outdated bathroom or to repair an aging bathtub. A typical refinishing job can usually be completed within a day and can cost up to a third less than the price of replacing a bathtub or shower.

Refinishing also has the benefit of being quicker and less disruptive than traditional remodeling activities. In addition, refinishing can result in a glossy, durable and long-lasting finish that can last up to several years.

It is also an eco-friendly option. Refinishing offers all these advantages, so it is definitely worth considering.

Can I resurface my bathtub myself?

Yes, in most cases you can resurface your bathtub yourself. However, resurfacing a bathtub requires some skill and knowledge, as well as the proper tools and materials. Furthermore, depending on the condition of your bathtub, it may require a professional to handle the job.

If your bathtub is in relatively good condition, then resurfacing can be an affordable DIY job. You can find bathtub refinishing kits at most home improvement stores or online. These kits will provide the necessary materials and instructions to complete the resurfacing project.

Before starting a bathtub resurfacing project, make sure you thoroughly clean the surface and repair any damage that may be present. Gaps, cracks and chips should be filled and sanded down before resurfacing begins.

Careful preparation is the key to a successful resurfacing project, so take your time to make sure you do it right.

Once the bathtub has been prepped and you have all the materials you need, you can begin the resurfacing process. Depending on the type of kit you have, this will involve applying several layers of a bonding primer, followed by a color coat and several layers of protective topcoat.

Make sure all the layers are properly applied and dried before moving on to the next step.

After the resurfacing is complete, you should wait at least 12 hours before using your bathtub. Make sure you follow the manufacturer’s instructions and properly clean and maintain your resurfaced bathtub.

With some patience and the right materials, you should be able to resurface your bathtub yourself with great results.

Can you use vinyl wrap on bathtub?

Yes, you can use vinyl wrap on your bathtub. Vinyl wrap is a great way to give your bathtub a new look without having to go through the hassle of replacing or having it reglazed. Vinyl wrap is a thin plastic film that you can apply to your bathtub which is completely removable.

This way you can give your tub an update without having to worry about doing permanent damage. It is also an inexpensive way to give your tub a modern look. The biggest benefit of using vinyl wrap to refresh your bathtub is that you can apply it yourself with a few simple tools and some time.

If you follow the instructions properly, the vinyl wrap should last for several years, making it a cost-effective way to give your bathtub a makeover.

Can you put a tub over an existing tub?

Yes, it is possible to put a tub over an existing tub in some cases. Doing so can give you a larger, more luxurious bathing space and modernize the look of your bathroom. Before installing an additional tub over an existing one, however, it is important to ensure that the existing tub is structurally sound and the floor can safely bear the additional weight.

Depending on the type of new tub you choose – heavier, thicker-walled acrylic models or lighter construction options – the flooring requirements may be different. Also, tile floors or floors built with plywood will be preferred over cement or concrete.

Furthermore, the tub must be securely anchored to the flooring to ensure safety and prevent movement or shifting. You also need to ensure that your existing plumbing can handle the extra weight by having it inspected by a qualified plumber.

With all safety requirements taken into account, you can go ahead and install the new tub above your existing one and have a larger tub with a spa experience.

How do I block the water in my bathtub?

There are several ways you can block the water in your bathtub.

1. Use caulk or sealant: You can use caulk or sealant to block the water from your bathtub in order to prevent water from seeping out. Make sure the caulk or sealant you use is specifically for water-proofing and is compatible with the material your bathtub is made from.

2. Install a bathtub drain guard: Installing a bathtub drain guard will help prevent water from flowing out of your bathtub. In various designs and materials.

3. Put a stopper in the bathtub plug hole: If your bathtub has a plug hole, you can put a stopper in it to block the water. There are a variety of stoppers available, including suction cup stoppers and rubber or metal stoppers that fit into the plug hole.

4. Use an inflatable plug or bathtub pillow: An inflatable plug or bathtub pillow is an easy and effective way of blocking the water in your bathtub. Simply place the plug or pillow into the bathtub and inflate it, and it will act as a barrier to keep the water from flowing out.

What can I put in my bath water to soak all the dirt off of my body?

One of the best ways to soak off all the dirt off of your body is to add some bath salts or epsom salts to your bath. Bath salts are a mixture of mineral-rich sea salts, Epsom salts, essential oils and sometimes dried herbs and flowers.

They can help to soothe your skin, improve circulation, and soften the water. Epsom salts are a great addition to your bath as they contain magnesium sulfate which relaxes muscles, softens skin, relieves stress and helps to detoxify your body.

Adding a few drops of essential oils to the mix will give you an aromatherapy experience as well. Other options include adding elements of nature like flowers, herbs, or oranges to the bath water and allowing their natural properties to work their magic.

Can you put Liquid Plumber down a bathtub?

Yes, you can put Liquid Plumber down a bathtub. Liquid Plumber is a drain opener designed to clear clogged drains, which can be used on tubs, toilets and sinks. To use Liquid Plumber on a bathtub, you will need to pour the Liquid Plumber directly into the drain and follow the directions on the label.

Some formulations of Liquid Plumber work best when left to sit for an extended period of time and then followed with hot water. It’s important to follow all directions on the label carefully and keep the area well ventilated while using Liquid Plumber and pouring hot water down the drain.

You should also always pour a liberal amount of hot water in the tub after using Liquid Plumber, to ensure that all the chemical has been removed from the drain area.

Does it devalue your house to not have a bathtub?

No, not necessarily. Bathtubs are not a necessity when it comes to housing, and not all homes have them. In fact, some types of properties, such as apartments and condos, rarely offer them at all. Whether or not a house devalues due to lack of a bathtub largely depends on its location and the tastes of prospective buyers.

In many areas, having a shower but no bathtub may actually be an attractive feature for buyers. They may prefer to take showers, have a smaller bathroom, or have more use for the space in the bathroom than for a bathtub.

On the other hand, in other areas, buyers may prefer having a bathtub, view having a shower only as a negative, and the house may be devalued as a result.

Overall, it is difficult to determine whether or not lack of a bathtub devalues a house. Factors such as location, type of housing, and the tastes and preferences of prospective buyers play a major role in that determination.