Skip to Content

How do you use the purple Swiffer Wet Jet?

Using the Swiffer Wet Jet is easy! First, you’ll need to assemble the Wet Jet. This includes unscrewing the cap from the handle, snapping the handle onto the mop, and attaching the end of the Wet Jet to the handle.

Next, you’ll need to fill the reservoir with water. Fill it to the indicated line. After that, you’ll need to add cleaning solution. Pour it into the same reservoir and give it a shake.

Now, you’re ready to start mopping! Glide the Wet Jet across your floors starting in a corner, going in a pattern and overlapping each section. When you’re done, you can attach the head of the Wet Jet to the handle and store it away.

To keep the Wet Jet in tip-top shape, periodically inspect it for damage. Replace the pad as needed. You’ll also want to thoroughly empty and clean the reservoir after each use to extend the life of the machine.

Which side of the Swiffer pad goes down?

The soft side of the Swiffer pad should always go down when doing the cleaning. This is to ensure the pad cleans the surface evenly and prevents any potential scratches on the surface. The Swiffer pads come with a cleaning solution and fibers that attract dirt.

The fibers easily grip dirt, dust and hair allowing it to be picked up by the pad when cleaning. Being sure to put the softer side of the pad down helps to ensure that the fibers won’t scratch the surface, as the rough side of the pad stays up.

Do you have to sweep before using a Swiffer WetJet?

Yes, it is important to sweep before using a Swiffer WetJet, as the cloths are designed to pick up surface dirt and debris, not clumps of dirt that may have been swept onto the floor. Sweeping before using the Swiffer WetJet will help ensure that the pad can grab what it is intended to, as well as allowing you to get the most out of the product.

Also, if there are clumps of dirt or debris on the floor, it could potentially become lodged in the pad and clog the sprayer on the WetJet, rendering it useless. So, to get the most out of your Swiffer WetJet, it is important to make sure you sweep the floor before using it.

Should I Swiffer before or after vacuuming?

The answer to this question really depends on your preference and which type of Swiffer you have. If you have a Swiffer Wet Jet then it is best to vacuum first, as it will remove any dirt, dust and debris from the floors before you mop.

This will ensure that the mop is able to cover the entire surface evenly. However, if you have a Swiffer Dry Sweeper, then it is best to use it before vacuuming, as it will help to pick up larger particles of dirt, dust and debris.

After you are finished, you can then vacuum up any remaining particles that the Swiffer was unable to pick up. Either way, both of these methods should work effectively, although vacuuming first may help to provide additional cleanliness, depending on your preferences.

Should you use both sides of a Swiffer?

Yes, you should use both sides of a Swiffer in order to maximize its cleaning performance. The two sides have different functions—the damp side lifts dirt, dust, and dried-on spills, while the dry side picks up what the damp side has left behind.

For example, when sweeping up dirt, debris, and crumbs, use the damp side to lift them up and the dry side to remove the last traces and lock in the dirt and debris. Furthermore, using both sides helps the Swiffer last longer, as using each side helps prevent it from getting clogged or worn out.

Is Swiffer WetJet better than a mop?

The answer to whether a Swiffer WetJet is better than a mop largely depends on the type of surface and cleanliness desired. On hardwood, laminate, and tile flooring, the Swiffer WetJet is a great tool to quickly pick up everyday dirt and dust while also providing a deeper clean.

The disposable cleaning pad and cleaner allows you to quickly and efficiently clean the surface with minimal effort. The light weight of the Swiffer WetJet also makes it easy to maneuver around furniture, reaching those tight spaces such as corners and baseboards for a more thorough clean.

On the other hand, mops can be a better choice for high traffic areas as they are able to cover more surface area in one swipe. Depending on the type of mop, you can either rinse and reuse the same mop head or grab a clean mop head from a bucket of soapy water.

This might be more effective for lifting up and absorbing grime, dirt, and grease. Mops are also better at getting into those deep nooks and crannies, usually found in kitchen areas, that a Swiffer WetJet would not be able to reach.

Ultimately, it depends on the surface and the level of cleanliness desired. For everyday floor cleaning and quick clean-ups, the Swiffer WetJet is a great tool. For heavily trafficked areas and tough messes, a mop may be a better choice.

What liquid do you put in a Swiffer WetJet?

The Swiffer Wetjet requires a special solution specifically formulated to work with its mopping system. The exact solution you need to use is Swiffer WetJet Multi-Purpose Cleaner Solution. This is specially formulated to cut through grease and tough dried-on messes, while still being gentle on your floor surfaces.

To fill the WetJet’s tank, you’ll need to pour the cleaner into the reservoir on the back of the machine. If you need to make a large batch of cleaner for the WetJet, you can use the Swiffer WetJet Cleaner Refill Bottle and mix it with warm water according to the bottle’s instructions.

Once the solution is in the WetJet’s tank, you’re ready to start mopping!.

Can I use Swiffer wet on hardwood floors?

Yes, you can use Swiffer wet on hardwood floors. It’s important to go over the floor with the Swiffer once and then go over it a second time with just water. This will ensure that you don’t leave behind any cleaning solution residue on your floor which can cause damage to the wood.

You should also make sure to just use one cloth dampened with the cleaning mixture and avoid overwetting the floor. Furthermore, it’s best to not use the Swiffer wet on wooden floors more than once a week to protect the integrity of the flooring.

Should I sweep the floor before I mopping?

Yes, it is important to sweep the floor before mopping. Sweeping will help to remove dirt and dust from the surface of the floor, allowing the mop to do a better job of cleaning. In addition, sweeping allows you to get into tight corners and under furniture to clear away debris and dust that can be hard to reach with a mop.

If you don’t sweep the floor before mopping, the dirt can get pushed into the grouting and between the tiles, which can create an area that is difficult to clean. Therefore, it is essential to sweep the floor before mopping in order to get the best possible cleaning job.

Does Swiffer just move dirt around?

No, Swiffer does not just move dirt around. Swiffer utilizes a combination of wet and dry cleaning to pick up dirt, dust and hair. The wet cloths are pre-saturated with cleaning solution to break up and dissolve messy residues, while the dry cloths act as the catching mechanism, trapping dirt and hair and controlling dust.

With Swiffer, you don’t just move dirt around – it is actively removed and stored on the cleaning pad until you can properly dispose of it.

Does Swiffer WetJet really clean floors?

Yes, Swiffer WetJet really does clean floors. It is a powerful and multi-functional floor cleaner that is quick and easy to use. With its ready-to-use formula, it delivers powerful cleaning without the need to mix or dilute – the floor is ready to use in just moments.

With the Swiffer WetJet, you can clean both hard floors and thin carpets, as well as corners, nooks and narrow spaces. The power of the WetJet lies in its cleaning solution, which is specially formulated to effectively clean dirt, oil, and grease.

It can safely cut through tough, greasy mess while still being gentle on all sealed hard floors. The cleaning process is incredibly simple: just fill the tank with cleaning solution, mop and squeeze the trigger to release the liquid onto the floor, and then use the thick mop pad to clean, with no rinsing required.

You can also attach a scrubbing pad to tackle tougher stains. With the Swiffer WetJet, you can quickly and easily get your floors back to looking like new – leaving them clean, shiny and streak-free.

Why does Swiffer make floors sticky?

Swiffer is supposed to make floors clean and shiny, not sticky. However, in some cases, Swiffer can make floors sticky, which is often the result of using too much of the cleaning solution. When using Swiffer, it is important to follow the manufacturer’s instructions carefully and only use the recommended amount of solution.

If too much solution is used, the excess can remain on the floor, which can make the floor sticky. Additionally, if the floors are not wiped down with a damp cloth after using Swiffer, the residue can remain on the surface and cause it to be sticky.

Finally, incorrect cleaning solution can also make floors sticky. All Swiffer solutions are specifically designed to work with the Swiffer mop, so using an alternative solution, such as soap and water, can harm the floor and make it sticky.

How do you get rid of Swiffer buildup?

Getting rid of Swiffer buildup requires a step-by-step process. First, check to make sure that your Swiffer isn’t clogged. To do this, pull the handle off the top of the Swiffer and examine it for any blockage that may be present.

If there is clogging present, remove it with a damp cloth or vacuum cleaner attachment. If there is no blockage, check the roller head for any buildup and use a dry brush to remove it.

Next, use a cleaning solution. Mix warm water with a few drops of vinegar or a mild liquid soap to create a cleaning solution. Saturate the cleaning cloth with the solution and gently scrub the Swiffer head to remove any remaining dirt and buildup.

Once the roller head is clean, rinse it with warm water and allow it to dry completely.

Finally, you should consider using a cleaning guard to prevent future buildup. You can find Swiffer cleaning guards online or at your local hardware store. These guards usually slide over the entire Swiffer and provide a barrier to keep dirt, dust, and other particles away from the roller head.

By following the steps outlined above, you should be able to remove any Swiffer buildup and keep it clean in the future.

Why are my floors still dirty after I mop?

There could be a few reasons why your floors are still dirty after mopping. One possibility is that you may not have been mopping your floor correctly. Make sure you are using a mop that is appropriate for the type of flooring you have; the wrong mop can push dirt around rather than collecting it.

You should also be using the correct cleaning solution – one designed for your type of floor. Additionally, make sure that you are using enough cleaning solution, and that you are scrubbing your floors with the mop to help break up dirt and grime.

Another possibility is that your mop may not be clean itself. If you are using a sponge mop, make sure you are changing or rinsing out the sponge frequently – with persistent dirt or bacteria, a dirty mop can just spread dirt around.

If you are using a microfiber mop, make sure you are washing the mop heads frequently with hot water and detergent.

Lastly, there could be a deeper issue with your floor. If the dirt and grime seems to be extra stuck on, it could indicate a need to strip and refinish the floor. This could be especially true in cases of old wax buildup.

If your floors are waxed, make sure you are using the right kind of cleaning solution so that you don’t strip away the wax.

Can you use regular Swiffer pads on WetJet?

No, regular Swiffer pads are designed for use with Swiffer or Sweep + Vac products. The Swiffer WetJet uses specially designed WetJet pads which are thicker and more absorbent. The WetJet pads also contain a cleaning solution that helps the pad break down dirt and grime, while the regular pads are just laced with a dust-attracting cleaning agent.

Additionally, regular Swiffer pads are not wet and do not contain any cleaning solution, so using a Swiffer pad on a WetJet may lead to streaks and/or a less than desirable cleaning job. Ultimately, using only the specially designed Swiffer WetJet pads on the Swiffer WetJet is the best way to get the most out of your cleaning tool.