Skip to Content

How high should a tub deck be?

The ideal height for a tub deck depends on a variety of factors related to the size and use of the tub. Generally, the deck should be high enough to place a ledge shelf or towel bar above the edge of the bathtub for convenience and comfort.

If the tub is wider than 60 inches, the deck should measure at least 18 inches in height. For a standard-sized bathtub of up to 60 inches in width, a deck height of 15 to 17 inches is recommended. However, if the tub is being used mainly for showering purposes, the deck should be configured at a sloped angle for better drainage.

When taking into account the user’s height and other preferences, you may also need to adjust the decking height accordingly. Ultimately, choosing the right height and slope of a deck can make the bathing area much more enjoyable and functional.

How tall is a typical tub surround?

The average height of a tub surround is between 72 and 84 inches from floor to top. However, it is important to measure the space precisely before selecting your tub surround to ensure that it is the correct size.

When measuring, take note of any windows or shower heads on or above the tub, as these will affect the necessary height. You should also make sure that the height of the tub surround allows for adequate headroom for entering and exiting the tub, as well as comfortable lounging.

When in doubt, go for a taller surround as this can always be shortened.

How high is step for walk in tub?

The exact height of the step for a walk in tub can depend on a few different factors, such as the size of the tub or the type of tub you choose. Generally speaking, the step height for a walk in tub ranges from around three to four inches high.

Some models can have higher steps, but most are designed to be easily accessed by those with mobility impairments. It is important to note that the step height can also be adjusted depending on the individual and their needs.

For example, some models can have adjustable legs to assist with shorter and/or taller users. Additionally, walk in tubs may have a small ramp leading into the tub and up to the seat, which can further reduce the step height and make it easier to enter and exit the tub.

Should you put flooring under a bathtub?

Yes, you should always put flooring under a bathtub. Depending on the type of bathtub being installed, proper flooring is necessary to protect the area, provide stability and support, and to ensure proper water drainage.

Flooring under a bathtub also helps to prevent mold and mildew. A concrete subfloor should be installed when installing a drop-in bathtub or a unitary tub & shower combo. Plywood underlayment is often used when installing a freestanding tub or an alcove-style tub.

The flooring should also be properly sealed to ensure that it is properly waterproofed. It’s important to ensure the subfloor is level before installing the flooring, otherwise you may end up with water pooling in one area which leads to water damage.

For tile flooring, a cement board should be used as the substrate. No matter what kind of bathtub you’re installing, be sure to take the necessary steps for installing the proper flooring for your bathtub to ensure longevity and safety.

Does bathtub need to be perfectly level?

The short answer is that, ideally, your bathtub should be level. When a bathtub isn’t level, water can pool in certain spots and cause problems. Minor sloping is okay, but if the difference is greater than ¼ inch then you should consider correcting the issue.

Unleveled bathtubs can cause a variety of problems, such as:

• Water not draining properly

• Water splashing out of the tub

• Grout cracking or detaching from the walls

• Pooling of water underneath the tub

• Unstable bath accessories such as a shower caddy becoming loose

In order to make sure that your bathtub is level, you’ll need to check the floor beneath it and make sure that it isn’t uneven. If the floor beneath the tub isn’t level, then you’ll need to address that issue before continuing or else you could end up with an unlevel bathtub.

To level the floor you may need to add some self-leveling joint compound or concrete or even cut back or add foam board to adjust for irregular surfaces.

Once the floor is level, you’ll need to adjust any plastic or metal legs that are connected to the bathtub. These legs provide support to the tub and equalize the weight, so make sure that they are level as well before securing them.

The last step is to adjust the bathtub itself. Depending on the type of bathtub, you may need to use a leveler and shims. Place the leveler against one side of the tub, and then adjust the feet as needed to ensure that the bubble is in the middle.

To further adjust it, you may need to add a shim underneath the feet in order to level out the bathtub.

In conclusion, making sure that your bathtub is level is an important step in maintaining a safe and functioning bathroom. It may take some time to adjust the feet and level out the bathtub, but it is an essential part of ensuring that your bathroom remains in proper working condition.

Should tile around tub go to ceiling?

When deciding whether or not to tile around a tub, it’s important to think about the overall design of the space as well as your preferences. Tile to the ceiling can give you a refreshing, updated look, while keeping the tile work below the ceiling can help keep the space looking open and airy.

Both options have their advantages.

If you’re going for a contemporary look, tiling around the tub to the ceiling can create a beautiful, cohesive look that’s visually appealing. Generally, larger tiles will be used for this type of design, making for a more seamless look that helps make the space appear more spacious.

On the other hand, not tiling up to the ceiling can create an airy, modern feel. For smaller tile sizes, such as mosaic tiles, this approach can add texture and visual intrigue to the bathroom, helping keep the design from becoming too overwhelming.

Ultimately, whether or not to tile around the tub to the ceiling is a personal decision. Consider the overall design and how much the tiling will affect the appearance. For larger bathrooms with a contemporary look, tile to the ceiling can be a great idea, while smaller bathrooms with a more traditional design may look better with the tilework kept below the ceiling.

How high should you tile around a bath?

When tiling around a bath, it is important to ensure the correct height is achieved in order to prevent water damage. Depending on the type of bath, the ideal height of the tiles should be between 135 and 150mm from the top of the bath.

However, it can be as high as 180mm from the top of the bath to the tiles, as long as the tile grout is waterproof and if the area is sealed with a caulk sealant. Without this sealant, water can easily leak through the grout and dampen any adjacent walls, causing mould growth and other interior damage.

For tiling a shower, the height could go as high as 200 mm from the top of the shower base and should also be sealed with a caulk sealant to ensure water does not leak into adjacent walls.

Are all tub surrounds the same size?

No, not all tub surrounds are the same size. The size of a tub surround will depend on the size of the bathtub itself and the amount of wall space available for the surround. Generally, a tub surround will come in a variety of sizes and can be customized to fit to the specific space and needs of the homeowner.

Some tub surrounds may come in standard sizes like 48 x 28 inches, while others can range from small sizes like 32 x 32 inches to large sizes like 60 x 60 inches and beyond. Additionally, some surrounds may have multiple pieces designed to fit and be installed around the tub, while others may come in one pre-formed piece.

It’s important to measure the area where the tub surround will be installed and consider the other factors associated with the space, such as wall height, space allowances, and drain and faucet locations, before choosing the size.

What size is a standard tub enclosure?

The size of a standard tub enclosure typically depends on the size of the bathtub it is being installed around. Specifically, the length of the enclosures will usually be the same as the length of the bathtub, while the height of the walls of the enclosure is generally at least 34 inches.

However, it is important to note that these measurements are standard for most tub enclosures, and the exact size largely will depend on the size of the bathtub, as well as personal preference and the space available.

When purchasing a new shower or tub enclosure, the measurements should be taken before the purchase is made. It is also important to measure the doorway size when planning and installing a new tub enclosure.

Tub enclosures should not be too large to fit through the door. A good rule of thumb is to measure the door and add 2” to the width and 3” to the height to ensure the enclosure can make it through the door before it is assembled.

Finally, it is possible to build custom tub enclosures. Many retailers and manufacturers will do this, and will even offer variations such as a rectangular enclosure for a round tub. It is important to make sure that when building a custom enclosure, it will fit in the space available for the tub and shower, as well as the bathroom as a whole.

In conclusion, standard tub enclosures will vary in size depending on the size of the bathtub, but should be at least 34 inches in height and the same length as the bathtub. Before purchasing, the measurements of the doorways and spaces should also be taken into consideration.

It is also possible to build a custom tub enclosure, though the measurements and size should be carefully considered beforehand.

Does a tub surround go over drywall?

Yes, a tub surround can be installed over drywall. This is one of the most common methods of installation, with the surround usually secured to the wall with a construction adhesive such as Liquid Nails.

The adhesive should be applied to the back of the surround before affixing it to the drywall. Anchors can also be used in addition to the adhesive, while screws can be used to secure the bottom of the surround to the tub or shower.

When installing the tub surround over drywall, you should also add a vapor barrier of plastic sheeting behind the surround as well to prevent water from seeping through the wall and causing damage.

What do you put behind tub surround?

When installing a tub surround, it is important to properly prepare the wall behind it in order to ensure a secure, watertight fit and a successful installation. First, the walls should be clean and dry.

Next, they should be covered with cement board. Cement board is a backer board that is impervious to water and highly resistant to mold and mildew. It should be laid and secured to the wall studs with drywall screws at a spacing of 3-4 inches apart.

Once the cement board is secure, it should be covered with waterproof membrane and then the seam should be taped. This will help protect the walls from moisture and mold. After all the preparation is complete, the tub surround can be properly positioned and secured to the walls.

What is the material for bathtub surrounds?

There are a variety of materials that are suitable for bathtub surrounds. Common choices include ceramic tile, marble, stone and solid surface materials, such as acrylic or granite. Ceramic tile is a popular choice, as it is waterproof and easy to clean.

However, it requires a great deal of grout, which can be difficult to clean. Marble and stone can be quite stylish and elegant, but they are also porous, which means they can absorb moisture, so they need to be sealed regularly.

Solid surface materials are a good choice, as they are durable and can last for many years. They also require minimal maintenance and can be easily wiped down. Another option is glass panels, which can give an attractive, modern look.

Generally, the selection of material for a bathtub surround will depend on personal preference, style and budget.

How do you frame for a tub?

Framing for a tub primarily involves building a support structure for the tub, installing the plumbing and drains, and creating a waterproof barrier with membrane and waterproofing compound.

The first step to framing a tub is constructing the support structure. This means assembling a metal frame, typically of steel, and adding in joists or metal support posts depending on the type of tub you are installing (alcove, corner, or freestanding).

Make sure when constructing the support structure that it is level and square, and all components are secured together to create a sturdy foundation.

The second step is to install the plumbing and drains. This will require connecting the pipes and drains to the wall and/or floor and properly sealing them. Make sure all plumbing is installed correctly and code-compliant, as any leaks can create major damage to the home.

The third step is to create a waterproof barrier. This consists of installing a membrane that provides a vapor barrier and a waterproof compound where the tub meets the walls and floor. The membrane will prevent moisture from seeping into the structure of the home, and the waterproof compound will ensure there is no leakage from the tub itself.

By following these steps, you can ensure the proper framing for a tub. Keep in mind it is important to use the right materials and do the job with precision and accuracy for a successful install.

Do you need to build a frame for a bath?

Yes, it is necessary to build a frame for a bath for two reasons. Firstly, a frame will provide structural support to the bath and ensure that the bath is secure and stable. Secondly, a frame will prevent drooping or collapsing of the bath by providing a rigid, level, and strong foundation.

Building a frame for the bath should be done with caution to ensure that it is durable and secure. The bath frame should be built using the correct materials and techniques and should be compliant with local building codes.

Additionally, anyone working on the frame should use appropriate safety equipment and techniques when carrying out the work on the frame to ensure their safety. Once the frame is built and the bath is in place, it should be checked and inspected to ensure that it is properly constructed, level, and secure.

Does a bathtub need support underneath?

Yes, a bathtub absolutely needs to be properly supported underneath. It is important to ensure that the bathtub is on a platform that is strong and level, as this will help to avoid damage to the bathtub over time.

Furthermore, ensuring the bathtub is properly supported underneath will help to prevent it from shifting or becoming unbalanced when someone enters or exits it. Having an adequate, stable base is essential to keep the bathtub secure and to ensure the structural integrity of the entire bathroom.

Without proper support, the bathtub could suffer from major structural damages over time.